Regroup everything here

.coveragerc

@@ -0,0 +1,10 @@
+[run]
+source =
+    note_kfet
+    note_theme
+    note_adherents
+omit =
+    note_theme/tests/*.py
+    note_theme/migrations/*.py
+    note_adherents/tests/*.py
+    note_adherents/migrations/*.py

.gitlab-ci.yml

@@ -0,0 +1,21 @@
+image: python:3.6
+
+stages:
+  - test
+
+before_script:
+  - pip install tox
+
+python36:
+  image: python:3.6
+  stage: test
+  script: tox -e py36
+
+python37:
+  image: python:3.7
+  stage: test
+  script: tox -e py37
+
+linters:
+  stage: test
+  script: tox -e linters

.pylintrc

@@ -0,0 +1,379 @@
+[MASTER]
+
+# Specify a configuration file.
+#rcfile=
+
+# Python code to execute, usually for sys.path manipulation such as
+# pygtk.require().
+#init-hook=
+
+# Add files or directories to the blacklist. They should be base names, not
+# paths.
+ignore=CVS,.git
+
+# Pickle collected data for later comparisons.
+persistent=yes
+
+# List of plugins (as comma separated values of python modules names) to load,
+# usually to register additional checkers.
+load-plugins=
+
+# Use multiple processes to speed up Pylint.
+jobs=4
+
+# Allow loading of arbitrary C extensions. Extensions are imported into the
+# active Python interpreter and may run arbitrary code.
+unsafe-load-any-extension=no
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code
+extension-pkg-whitelist=
+
+# Allow optimization of some AST trees. This will activate a peephole AST
+# optimizer, which will apply various small optimizations. For instance, it can
+# be used to obtain the result of joining multiple strings with the addition
+# operator. Joining a lot of strings can lead to a maximum recursion error in
+# Pylint and this flag can prevent that. It has one side effect, the resulting
+# AST will be different than the one from reality.
+optimize-ast=no
+
+
+[MESSAGES CONTROL]
+
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
+confidence=INFERENCE_FAILURE
+
+# Enable the message, report, category or checker with the given id(s). You can
+# either give multiple identifier separated by comma (,) or put this option
+# multiple time. See also the "--disable" option for examples.
+#enable=
+
+# Disable the message, report, category or checker with the given id(s). You
+# can either give multiple identifiers separated by comma (,) or put this
+# option multiple times (only on the command line, not in the configuration
+# file where it should appear only once).You can also use "--disable=all" to
+# disable everything first and then reenable specific checks. For example, if
+# you want to run only the similarities checker, you can use "--disable=all
+# --enable=similarities". If you want to run only the classes checker, but have
+# no Warning level messages displayed, use"--disable=all --enable=classes
+# --disable=W"
+disable=intern-builtin,nonzero-method,parameter-unpacking,backtick,raw_input-builtin,dict-view-method,filter-builtin-not-iterating,long-builtin,unichr-builtin,input-builtin,unicode-builtin,file-builtin,map-builtin-not-iterating,delslice-method,apply-builtin,cmp-method,setslice-method,coerce-method,long-suffix,raising-string,import-star-module-level,buffer-builtin,reload-builtin,unpacking-in-except,print-statement,hex-method,old-octal-literal,metaclass-assignment,dict-iter-method,range-builtin-not-iterating,using-cmp-argument,indexing-exception,no-absolute-import,coerce-builtin,getslice-method,suppressed-message,execfile-builtin,round-builtin,useless-suppression,reduce-builtin,old-raise-syntax,zip-builtin-not-iterating,cmp-builtin,xrange-builtin,standarderror-builtin,old-division,oct-method,next-method-called,old-ne-operator,basestring-builtin
+
+
+[REPORTS]
+
+# Set the output format. Available formats are text, parseable, colorized, msvs
+# (visual studio) and html. You can also give a reporter class, eg
+# mypackage.mymodule.MyReporterClass.
+output-format=text
+
+# Put messages in a separate file for each module / package specified on the
+# command line instead of printing them on stdout. Reports (if any) will be
+# written in a file name "pylint_global.[txt|html]".
+files-output=no
+
+# Tells whether to display a full report or only the messages
+reports=no
+
+# Python expression which should return a note less than 10 (10 is the highest
+# note). You have access to the variables errors warning, statement which
+# respectively contain the number of errors / warnings messages and the total
+# number of statements analyzed. This is used by the global evaluation report
+# (RP0004).
+evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
+
+# Template used to display messages. This is a python new-style format string
+# used to format the message information. See doc for all details
+#msg-template=
+
+
+[BASIC]
+
+# List of builtins function names that should not be used, separated by a comma
+bad-functions=map,filter
+
+# Good variable names which should always be accepted, separated by a comma
+good-names=i,j,k,ex,Run,_
+
+# Bad variable names which should always be refused, separated by a comma
+bad-names=foo,bar,baz,toto,tutu,tata
+
+# Colon-delimited sets of names that determine each other's naming style when
+# the name regexes allow several styles.
+name-group=
+
+# Include a hint for the correct naming format with invalid-name
+include-naming-hint=yes
+
+# Regular expression matching correct argument names
+argument-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for argument names
+argument-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct attribute names
+attr-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for attribute names
+attr-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct constant names
+const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
+
+# Naming hint for constant names
+const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
+
+# Regular expression matching correct class names
+class-rgx=[A-Z_][a-zA-Z0-9]+$
+
+# Naming hint for class names
+class-name-hint=[A-Z_][a-zA-Z0-9]+$
+
+# Regular expression matching correct inline iteration names
+inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
+
+# Naming hint for inline iteration names
+inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
+
+# Regular expression matching correct class attribute names
+class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
+
+# Naming hint for class attribute names
+class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
+
+# Regular expression matching correct function names
+function-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for function names
+function-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct module names
+module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
+
+# Naming hint for module names
+module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
+
+# Regular expression matching correct method names
+method-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for method names
+method-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct variable names
+variable-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for variable names
+variable-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression which should only match function or class names that do
+# not require a docstring.
+no-docstring-rgx=^_
+
+# Minimum line length for functions/classes that require docstrings, shorter
+# ones are exempt.
+docstring-min-length=-1
+
+
+[ELIF]
+
+# Maximum number of nested blocks for function / method body
+max-nested-blocks=5
+
+
+[FORMAT]
+
+# Maximum number of characters on a single line.
+max-line-length=100
+
+# Regexp for a line that is allowed to be longer than the limit.
+ignore-long-lines=^\s*(# )?<?https?://\S+>?$
+
+# Allow the body of an if to be on the same line as the test if there is no
+# else.
+single-line-if-stmt=no
+
+# List of optional constructs for which whitespace checking is disabled. `dict-
+# separator` is used to allow tabulation in dicts, etc.: {1  : 1,\n222: 2}.
+# `trailing-comma` allows a space between comma and closing bracket: (a, ).
+# `empty-line` allows space-only lines.
+no-space-check=trailing-comma,dict-separator
+
+# Maximum number of lines in a module
+max-module-lines=1000
+
+# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
+# tab).
+indent-string='    '
+
+# Number of spaces of indent required inside a hanging  or continued line.
+indent-after-paren=4
+
+# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
+expected-line-ending-format=
+
+
+[LOGGING]
+
+# Logging modules to check that the string format arguments are in logging
+# function parameter format
+logging-modules=logging
+
+
+[MISCELLANEOUS]
+
+# List of note tags to take in consideration, separated by a comma.
+notes=FIXME,XXX,TODO
+
+
+[SIMILARITIES]
+
+# Minimum lines number of a similarity.
+min-similarity-lines=4
+
+# Ignore comments when computing similarities.
+ignore-comments=yes
+
+# Ignore docstrings when computing similarities.
+ignore-docstrings=yes
+
+# Ignore imports when computing similarities.
+ignore-imports=no
+
+
+[SPELLING]
+
+# Spelling dictionary name. Available dictionaries: none. To make it working
+# install python-enchant package.
+spelling-dict=
+
+# List of comma separated words that should not be checked.
+spelling-ignore-words=
+
+# A path to a file that contains private dictionary; one word per line.
+spelling-private-dict-file=
+
+# Tells whether to store unknown words to indicated private dictionary in
+# --spelling-private-dict-file option instead of raising a message.
+spelling-store-unknown-words=no
+
+
+[TYPECHECK]
+
+# Tells whether missing members accessed in mixin class should be ignored. A
+# mixin class is detected if its name ends with "mixin" (case insensitive).
+ignore-mixin-members=yes
+
+# List of module names for which member attributes should not be checked
+# (useful for modules/projects where namespaces are manipulated during runtime
+# and thus existing member attributes cannot be deduced by static analysis. It
+# supports qualified module names, as well as Unix pattern matching.
+ignored-modules=
+
+# List of classes names for which member attributes should not be checked
+# (useful for classes with attributes dynamically set). This supports can work
+# with qualified names.
+ignored-classes=
+
+# List of members which are set dynamically and missed by pylint inference
+# system, and so shouldn't trigger E1101 when accessed. Python regular
+# expressions are accepted.
+generated-members=
+
+
+[VARIABLES]
+
+# Tells whether we should check for unused import in __init__ files.
+init-import=no
+
+# A regular expression matching the name of dummy variables (i.e. expectedly
+# not used).
+dummy-variables-rgx=_$|dummy
+
+# List of additional names supposed to be defined in builtins. Remember that
+# you should avoid to define new builtins when possible.
+additional-builtins=
+
+# List of strings which can identify a callback function by name. A callback
+# name must start or end with one of those strings.
+callbacks=cb_,_cb
+
+
+[CLASSES]
+
+# List of method names used to declare (i.e. assign) instance attributes.
+defining-attr-methods=__init__,__new__,setUp
+
+# List of valid names for the first argument in a class method.
+valid-classmethod-first-arg=cls
+
+# List of valid names for the first argument in a metaclass class method.
+valid-metaclass-classmethod-first-arg=mcs
+
+# List of member names, which should be excluded from the protected access
+# warning.
+exclude-protected=_asdict,_fields,_replace,_source,_make
+
+
+[DESIGN]
+
+# Maximum number of arguments for function / method
+max-args=20
+
+# Argument names that match this expression will be ignored. Default to name
+# with leading underscore
+ignored-argument-names=_.*
+
+# Maximum number of locals for function / method body
+max-locals=20
+
+# Maximum number of return / yield for function / method body
+max-returns=6
+
+# Maximum number of branch for function / method body
+max-branches=12
+
+# Maximum number of statements in function / method body
+max-statements=50
+
+# Maximum number of parents for a class (see R0901).
+max-parents=7
+
+# Maximum number of attributes for a class (see R0902).
+max-attributes=10
+
+# Minimum number of public methods for a class (see R0903).
+min-public-methods=2
+
+# Maximum number of public methods for a class (see R0904).
+max-public-methods=20
+
+# Maximum number of boolean expressions in an if statement
+max-bool-expr=5
+
+
+[IMPORTS]
+
+# Deprecated modules which should not be used, separated by a comma
+deprecated-modules=optparse
+
+# Create a graph of every (i.e. internal and external) dependencies in the
+# given file (report RP0402 must not be disabled)
+import-graph=
+
+# Create a graph of external dependencies in the given file (report RP0402 must
+# not be disabled)
+ext-import-graph=
+
+# Create a graph of internal dependencies in the given file (report RP0402 must
+# not be disabled)
+int-import-graph=
+
+
+[EXCEPTIONS]
+
+# Exceptions that will emit a warning when being caught. Defaults to
+# "Exception"
+overgeneral-exceptions=Exception
+

note_adherents/models.py

@@ -0,0 +1,75 @@
+# -*- mode: python; coding: utf-8 -*-
+# Copyright (C) 2016-2019 by BDE
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+from django.conf import settings
+from django.contrib.auth.models import User
+from django.db import models
+from django.db.models.signals import post_save
+from django.dispatch import receiver
+from django.utils.translation import gettext_lazy as _
+
+
+class Profile(models.Model):
+    """
+    An user profile
+
+    We do not want to patch the Django Contrib Auth User class
+    so this model add an user profile with additional information.
+    """
+    user = models.OneToOneField(
+        settings.AUTH_USER_MODEL,
+        on_delete=models.CASCADE,
+    )
+    phone_number = models.CharField(
+        max_length=255,
+        verbose_name=_('phone number'),
+    )
+    section = models.CharField(
+        max_length=255,
+        verbose_name=_('section'),
+        help_text=_('e.g. "1A0", "9A♥", "SAPHIRE"'),
+    )
+
+    class Meta:
+        verbose_name = _('user profile')
+        verbose_name_plural = _('user profile')
+
+    def __str__(self):
+        return self.user.get_username()
+
+
+class MembershipFee(models.Model):
+    """
+    TODO
+    """
+    user = models.ForeignKey(
+        settings.AUTH_USER_MODEL,
+        on_delete=models.PROTECT,
+    )
+    date = models.CharField(
+        max_length=255,
+        verbose_name=_('phone number'),
+    )
+    amount = models.CharField(
+        max_length=255,
+        verbose_name=_('section'),
+        help_text=_('e.g. "1A0", "9A♥", "SAPHIRE"'),
+    )
+
+    class Meta:
+        verbose_name = _('user profile')
+        verbose_name_plural = _('user profile')
+
+    def __str__(self):
+        return self.user.get_username()
+
+
+@receiver(post_save, sender=User)
+def save_user_profile(sender, instance, created, **_kwargs):
+    """
+    Hook to save an user profile when an user is updated
+    """
+    if created:
+        Profile.objects.create(user=instance)
+    instance.profile.save()

note_theme/locale/fr/LC_MESSAGES/django.po

@@ -0,0 +1,104 @@
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2019-06-30 16:26+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: templates/admin/base_site.html:22 templates/base.html:48
+msgid "Welcome,"
+msgstr ""
+
+#: templates/admin/base_site.html:27
+msgid "View site"
+msgstr "Retour au site"
+
+#: templates/admin/base_site.html:32 templates/admin/base_site.html:51
+#: templates/base.html:52
+msgid "View admin"
+msgstr "Administration"
+
+#: templates/admin/base_site.html:44
+msgid "Documentation"
+msgstr ""
+
+#: templates/admin/base_site.html:53 templates/base.html:56
+msgid "Log out"
+msgstr ""
+
+#: templates/base.html:62 templates/registration/login.html:9
+#: templates/registration/login.html:56
+msgid "Log in"
+msgstr ""
+
+#: templates/registration/logged_out.html:9
+#: templates/registration/password_change_done.html:9
+#: templates/registration/password_change_form.html:9
+#: templates/registration/password_reset_complete.html:9
+#: templates/registration/password_reset_confirm.html:9
+#: templates/registration/password_reset_done.html:9
+#: templates/registration/password_reset_form.html:9
+msgid "Home"
+msgstr ""
+
+#: templates/registration/login.html:14
+msgid "Please correct the error below."
+msgstr ""
+
+#: templates/registration/login.html:15
+msgid "Please correct the errors below."
+msgstr ""
+
+#: templates/registration/login.html:31
+#, python-format
+msgid ""
+"You are authenticated as %(username)s, but are not authorized to access this "
+"page. Would you like to login to a different account?"
+msgstr ""
+
+#: templates/registration/login.html:52
+msgid "Forgotten your password?"
+msgstr "Mot de passe oublié ?"
+
+#: templates/registration/password_change_done.html:9
+#: templates/registration/password_change_form.html:9
+msgid "Password change"
+msgstr ""
+
+#: templates/registration/password_reset_complete.html:9
+#: templates/registration/password_reset_done.html:9
+#: templates/registration/password_reset_form.html:9
+msgid "Password reset"
+msgstr ""
+
+#: templates/registration/password_reset_confirm.html:9
+msgid "Password reset confirmation"
+msgstr ""
+
+#: templates/registration/password_reset_email.html:2
+#, python-format
+msgid ""
+"You're receiving this email because you requested a password reset for your "
+"user account at %(site_name)s."
+msgstr ""
+
+#: templates/registration/password_reset_email.html:4
+msgid "Please go to the following page and choose a new password:"
+msgstr ""
+
+#: templates/registration/password_reset_email.html:9
+msgid "Thanks for using our site!"
+msgstr ""
+
+#: templates/registration/password_reset_email.html:11
+#, python-format
+msgid "The %(site_name)s team"
+msgstr ""

note_theme/static/css/admin.css

@@ -0,0 +1,141 @@
+/*
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ * Copyright © 2019  Alexandre Iooss
+ *
+ * This is the custom style for Django Contrib Admin
+ */
+
+/* Colors */
+#header {
+    background-color: #151515;
+    border-bottom: solid 5px #d80029;
+    padding: 10px 40px;
+}
+
+.module h2, .module caption, .inline-group h2 {
+    background: #e6e0d8;
+    color: #222;
+}
+
+a.section:link, a.section:visited {
+    color: #222;
+}
+
+#user-tools a {
+    border-bottom: none;
+    font-weight: bold;
+}
+
+div.breadcrumbs {
+    background: #3c3c3c;
+}
+
+.button, input[type=submit], input[type=button], .submit-row input, a.button {
+    background: #d8a456;
+}
+
+.button:active, input[type=submit]:active, input[type=button]:active, .button:focus, input[type=submit]:focus,
+input[type=button]:focus, .button:hover, input[type=submit]:hover, input[type=button]:hover {
+    background: #b98d4a;
+}
+
+.button.default, input[type=submit].default, .submit-row input.default {
+    background: #b98d4a;
+}
+
+.button.default:active, input[type=submit].default:active, .button.default:focus, input[type=submit].default:focus,
+.button.default:hover, input[type=submit].default:hover {
+    background: #a7752b;
+}
+
+/* User tools top menu */
+#user-tools .dropdown:hover > a, #user-tools .dropdown:focus > a {
+    color: #79aec8;
+}
+
+#user-tools .dropdown {
+    position: relative; /* needed to position the dropdown content */
+    display: inline-block;
+}
+
+#user-tools .dropdown-content {
+    display: block;
+    position: absolute;
+    background-color: #444444;
+    min-width: 180px;
+    box-shadow: 0 8px 16px 0 rgba(0, 0, 0, 0.2);
+    z-index: 2000;
+    text-align: left;
+
+    /* Hide menu by making it transparent */
+    transition: opacity 100ms, visibility 100ms;
+    opacity: 0;
+    visibility: hidden;
+}
+
+#user-tools .dropdown-content a {
+    color: #fff;
+    padding: 7px 8px;
+    text-decoration: none;
+    display: block;
+    line-height: 16px;
+}
+
+#user-tools .dropdown-content a:hover {
+    background-color: #636363;
+}
+
+#user-tools .dropdown:hover .dropdown-content {
+    opacity: 1;
+    visibility: visible;
+}
+
+/* Fix navigation hidden */
+#header {
+    overflow: visible;
+}
+
+.login #header {
+    overflow: hidden;
+}
+
+/* Footer */
+#footer {
+    padding: 20px 40px;
+    color: #999;
+}
+
+.login #footer {
+    padding: 10px;
+    font-size: 10pt;
+}
+
+#footer a {
+    color: #777;
+}
+
+#footer select {
+    height: 24px;
+    padding: 0;
+}
+
+/* Pull footer to bottom */
+#content {
+    min-height: calc(100vh - 190px);
+}
+
+.login #content {
+    min-height: 0;
+}
+
+/* Recenter login button */
+.login .submit-row {
+    padding: 1em 0 0 0 !important;
+    text-align: center !important;
+}
+
+/* Dashboard should take all page */
+.dashboard #content {
+    width: auto;
+}

note_theme/static/favicon/browserconfig.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<browserconfig>
+    <msapplication>
+        <tile>
+            <square150x150logo src="/static/favicon/mstile-150x150.png"/>
+            <TileColor>#da532c</TileColor>
+        </tile>
+    </msapplication>
+</browserconfig>

note_theme/static/favicon/site.webmanifest

@@ -0,0 +1,19 @@
+{
+    "name": "",
+    "short_name": "",
+    "icons": [
+        {
+            "src": "/static/favicon/android-chrome-192x192.png",
+            "sizes": "192x192",
+            "type": "image/png"
+        },
+        {
+            "src": "/static/favicon/android-chrome-512x512.png",
+            "sizes": "512x512",
+            "type": "image/png"
+        }
+    ],
+    "theme_color": "#ffffff",
+    "background_color": "#ffffff",
+    "display": "standalone"
+}

note_theme/templates/admin/base_site.html

@@ -0,0 +1,96 @@
+{% extends "admin/base.html" %}
+{% comment %}
+SPDX-License-Identifier: GPL-3.0-or-later
+{% endcomment %}
+
+{% load i18n staticfiles %}
+
+{% block title %}{{ title }} | {{ request.site.name }}{% endblock %}
+
+{% block branding %}
+    <strong id="site-name">
+        <a href="{{ site_url }}">
+            {{ request.site.name }}
+        </a>
+    </strong>
+{% endblock %}
+
+{% block usertools %}
+    {% if user.is_authenticated %}
+        <div id="user-tools">
+            {% block welcome-msg %}
+                {% trans 'Welcome,' %}
+                <strong>{% firstof user.get_short_name user.get_username %}</strong>.
+            {% endblock %}
+            {% block userlinks %}
+                {% if site_url %}
+                    <a href="{{ site_url }}">{% trans 'View site' %}</a> /
+                {% endif %}
+                {% if available_apps %}
+                    {# When in admin site, list all admin pages and documentation #}
+                    <span class="dropdown">
+                        <a href="{% url 'admin:index' %}">{% trans 'View admin' %}</a>
+                        <span class="dropdown-content">
+                            {% for app in available_apps %}
+                                {% for model in app.models %}
+                                    {% if model.admin_url %}
+                                        <a href="{{ model.admin_url }}">{{ model.name }}</a>
+                                    {% endif %}
+                                {% endfor %}
+                            {% endfor %}
+                            {% if user.is_active and user.is_superuser %}
+                                {% url 'django-admindocs-docroot' as docsroot %}
+                                {% if docsroot %}
+                                    <a href="{{ docsroot }}">{% trans 'Documentation' %}</a>
+                                {% endif %}
+                            {% endif %}
+                         </span>
+                    </span> /
+                {% elif user.is_staff %}
+                    {# When not in admin site, but user is staff then add a link #}
+                    <a href="{% url 'admin:index' %}">{% trans 'View admin' %}</a> /
+                {% endif %}
+                <a href="{% url 'logout' %}">{% trans 'Log out' %}</a>
+            {% endblock %}
+        </div>
+    {% endif %}
+{% endblock %}
+
+{% block extrastyle %}
+    <link rel="stylesheet" type="text/css" href="{% static "css/admin.css" %}"/>
+
+    {# Favicon #}
+    <link rel="apple-touch-icon" sizes="180x180" href="{% static "favicon/apple-touch-icon.png" %}">
+    <link rel="icon" type="image/png" sizes="32x32" href="{% static "favicon/favicon-32x32.png" %}">
+    <link rel="icon" type="image/png" sizes="16x16" href="{% static "favicon/favicon-16x16.png" %}">
+    <link rel="manifest" href="{% static "favicon/site.webmanifest" %}">
+    <link rel="mask-icon" href="{% static "favicon/safari-pinned-tab.svg" %}" color="#5bbad5">
+    <link rel="shortcut icon" href="{% static "favicon/favicon.ico" %}">
+    <meta name="msapplication-TileColor" content="#da532c">
+    <meta name="msapplication-config" content="{% static "favicon/browserconfig.xml" %}">
+    <meta name="theme-color" content="#ffffff">
+{% endblock %}
+
+{% block footer %}
+    {% if not is_popup %}
+        <div id="footer">
+            <form action="{% url 'set_language' %}" method="post">
+                {% csrf_token %}
+                <select title="language" name="language" onchange="this.form.submit()">
+                    {% get_current_language as LANGUAGE_CODE %}
+                    {% get_available_languages as LANGUAGES %}
+                    {% get_language_info_list for LANGUAGES as languages %}
+                    {% for language in languages %}
+                        <option value="{{ language.code }}"{% if language.code == LANGUAGE_CODE %} selected{% endif %}>
+                            {{ language.name_local }} ({{ language.code }})
+                        </option>
+                    {% endfor %}
+                </select>
+                <noscript>
+                    <input type="submit">
+                </noscript>
+                Note Kfet 2018-2020 &mdash; <a href="mailto:tresorerie.bde@lists.crans.org">Nous contactez</a>
+            </form>
+        </div>
+    {% endif %}
+{% endblock %}

note_theme/templates/registration/logged_out.html

@@ -0,0 +1,11 @@
+{% extends "registration/logged_out.html" %}
+{% comment %}
+SPDX-License-Identifier: GPL-3.0-or-later
+{% endcomment %}
+{% load i18n %}
+
+{% block breadcrumbs %}
+    <div class="breadcrumbs">
+        <a href="{% url 'index' %}">{% trans 'Home' %}</a>
+    </div>
+{% endblock %}

note_theme/templates/registration/password_change_done.html

@@ -0,0 +1,11 @@
+{% extends "registration/password_change_done.html" %}
+{% comment %}
+SPDX-License-Identifier: GPL-3.0-or-later
+{% endcomment %}
+{% load i18n %}
+
+{% block breadcrumbs %}
+    <div class="breadcrumbs">
+        <a href="{% url 'index' %}">{% trans 'Home' %}</a> &rsaquo; {% trans 'Password change' %}
+    </div>
+{% endblock %}

note_theme/templates/registration/password_change_form.html

@@ -0,0 +1,11 @@
+{% extends "registration/password_change_form.html" %}
+{% comment %}
+SPDX-License-Identifier: GPL-3.0-or-later
+{% endcomment %}
+{% load i18n %}
+
+{% block breadcrumbs %}
+    <div class="breadcrumbs">
+        <a href="{% url 'index' %}">{% trans 'Home' %}</a> &rsaquo; {% trans 'Password change' %}
+    </div>
+{% endblock %}

note_theme/templates/registration/password_reset_complete.html

@@ -0,0 +1,11 @@
+{% extends "registration/password_reset_complete.html" %}
+{% comment %}
+SPDX-License-Identifier: GPL-3.0-or-later
+{% endcomment %}
+{% load i18n %}
+
+{% block breadcrumbs %}
+    <div class="breadcrumbs">
+        <a href="{% url 'index' %}">{% trans 'Home' %}</a> &rsaquo; {% trans 'Password reset' %}
+    </div>
+{% endblock %}

note_theme/templates/registration/password_reset_confirm.html

@@ -0,0 +1,11 @@
+{% extends "registration/password_reset_confirm.html" %}
+{% comment %}
+SPDX-License-Identifier: GPL-3.0-or-later
+{% endcomment %}
+{% load i18n %}
+
+{% block breadcrumbs %}
+    <div class="breadcrumbs">
+        <a href="{% url 'index' %}">{% trans 'Home' %}</a> &rsaquo; {% trans 'Password reset confirmation' %}
+    </div>
+{% endblock %}

note_theme/templates/registration/password_reset_done.html

@@ -0,0 +1,11 @@
+{% extends "registration/password_reset_done.html" %}
+{% comment %}
+SPDX-License-Identifier: GPL-3.0-or-later
+{% endcomment %}
+{% load i18n %}
+
+{% block breadcrumbs %}
+    <div class="breadcrumbs">
+        <a href="{% url 'index' %}">{% trans 'Home' %}</a> &rsaquo; {% trans 'Password reset' %}
+    </div>
+{% endblock %}

note_theme/templates/registration/password_reset_email.html

@@ -0,0 +1,13 @@
+{% load i18n %}{% autoescape off %}
+{% blocktrans %}You're receiving this email because you requested a password reset for your user account at {{ site_name }}.{% endblocktrans %}
+
+{% trans "Please go to the following page and choose a new password:" %}
+{% block reset_link %}
+{{ protocol }}://{{ domain }}{% url 'password_reset_confirm' uidb64=uid token=token %}
+{% endblock %}
+
+{% trans "Thanks for using our site!" %}
+
+{% blocktrans %}The {{ site_name }} team{% endblocktrans %}
+
+{% endautoescape %}

note_theme/templates/registration/password_reset_form.html

@@ -0,0 +1,11 @@
+{% extends "registration/password_reset_form.html" %}
+{% comment %}
+SPDX-License-Identifier: GPL-3.0-or-later
+{% endcomment %}
+{% load i18n %}
+
+{% block breadcrumbs %}
+    <div class="breadcrumbs">
+        <a href="{% url 'index' %}">{% trans 'Home' %}</a> &rsaquo; {% trans 'Password reset' %}
+    </div>
+{% endblock %}

note_theme/tests/test_templates.py

@@ -0,0 +1,44 @@
+# -*- mode: python; coding: utf-8 -*-
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+from django.contrib.auth.models import User
+from django.test import TestCase
+
+"""
+Test that every themed page still works
+"""
+
+
+class TemplateLoggedOutTests(TestCase):
+    def test_login_page(self):
+        response = self.client.get('/admin/login/')
+        self.assertEqual(response.status_code, 200)
+
+
+class TemplateLoggedInTests(TestCase):
+    def setUp(self):
+        self.user = User.objects.create_superuser(
+            username="admin",
+            password="adminadmin",
+            email="admin@example.com",
+        )
+        self.client.force_login(self.user)
+
+    def test_login_page(self):
+        """
+        Login page should redirect
+        """
+        response = self.client.get('/admin/login/')
+        self.assertEqual(response.status_code, 302)
+
+    def test_admin_index(self):
+        response = self.client.get('/admin/')
+        self.assertEqual(response.status_code, 200)
+
+    def test_accounts_password_reset(self):
+        response = self.client.get('/accounts/password_reset/')
+        self.assertEqual(response.status_code, 200)
+
+    def test_logout_page(self):
+        response = self.client.get('/accounts/logout/')
+        self.assertEqual(response.status_code, 200)

tox.ini

@@ -0,0 +1,49 @@
+[tox]
+envlist = py36,py37,linters
+skipsdist = True
+
+[testenv]
+basepython = python3
+deps =
+    -r{toxinidir}/requirements.txt
+    coverage
+commands =
+    coverage run ./manage.py test {posargs}
+    coverage report -m
+
+[testenv:pre-commit]
+deps = pre-commit
+commands =
+    pre-commit run --all-files --show-diff-on-failure
+
+[testenv:linters]
+deps =
+    -r{toxinidir}/requirements.txt
+    flake8
+    flake8-colors
+    flake8-import-order
+    flake8-typing-imports
+    pep8-naming
+    pyflakes
+    pylint
+commands =
+    flake8 note_*
+    pylint .
+
+[flake8]
+ignore = D203, W503, E203
+exclude =
+    .tox,
+    .git,
+    __pycache__,
+    build,
+    dist,
+    *.pyc,
+    *.egg-info,
+    .cache,
+    .eggs
+max-complexity = 10
+import-order-style = google
+application-import-names = flake8
+format = ${cyan}%(path)s${reset}:${yellow_bold}%(row)d${reset}:${green_bold}%(col)d${reset}: ${red_bold}%(code)s${reset} %(text)s
+