From 7af58a6dc74ff3e84ae44b6e8b70c42289342bbe Mon Sep 17 00:00:00 2001 From: Yohann D'ANELLO Date: Fri, 29 Jan 2021 01:08:39 +0100 Subject: [PATCH] Clone shirenn's configuration --- ansible.cfg | 39 +- base.yml | 29 +- group_vars/all.yml | 22 + group_vars/laptop.yml | 4 + host_vars/dt.adh.crans.org.yml | 4 + host_vars/localhost | 1 + host_vars/tealc.crans.org.yml | 4 + host_vars/templier.adh.crans.org.yml | 4 + host_vars/ynerant-pc.fil.sand.auro.re.yml | 9 + .../ynerant-thinkpad.wifi.sand.auro.re.yml | 9 + host_vars/zamok.crans.org.yml | 4 + hosts | 16 +- roles/audio/tasks/main.yml | 12 + roles/baseconfig/files/skel/dot_zshrc | 3756 ----------------- roles/baseconfig/files/skel/dot_zshrc.local | 326 -- roles/baseconfig/files/update-motd.d/00-logo | 39 - roles/baseconfig/files/update-motd.d/10-uname | 3 - roles/baseconfig/handlers/main.yml | 4 - roles/baseconfig/tasks/main.yml | 52 - roles/bind/handlers/main.yml | 6 + roles/bind/tasks/main.yml | 23 + roles/bind/templates/db.j2 | 21 + roles/bind/templates/named.conf.local.j2 | 16 + roles/cli-utils/tasks/main.yml | 36 + roles/cli-utils/templates/bash_aliases.j2 | 41 + roles/cli-utils/templates/bashrc.j2 | 57 + roles/cli-utils/templates/gitconfig.j2 | 13 + roles/cli-utils/templates/inputrc.j2 | 1 + roles/cli-utils/templates/tmux.conf.j2 | 25 + roles/communication/tasks/main.yml | 40 + roles/communication/templates/gtkrc.j2 | 19 + roles/communication/templates/index.theme.j2 | 4 + roles/communication/templates/settings.ini.j2 | 16 + roles/i3/tasks/main.yml | 28 + roles/i3/templates/i3.j2 | 230 + roles/i3/templates/i3status.j2 | 61 + roles/mime/tasks/main.yml | 19 + roles/mime/templates/mimeapps.list.j2 | 17 + roles/multimedia/tasks/main.yml | 30 + roles/multimedia/templates/mpv.conf.j2 | 28 + roles/multimedia/templates/zathurarc.j2 | 3 + roles/navigateur/tasks/main.yml | 9 + roles/notification/tasks/main.yml | 24 + roles/notification/templates/dunstrc.j2 | 292 ++ roles/ntp/handlers/main.yml | 7 + roles/ntp/tasks/main.yml | 23 + roles/ntp/templates/ntp.conf.j2 | 25 + roles/pass/tasks/main.yml | 16 + roles/scripts/tasks/main.yml | 30 + roles/ssh/tasks/main.yml | 28 + roles/ssh/templates/config.d/aurore.j2 | 3 + roles/ssh/templates/config.d/crans.j2 | 13 + roles/ssh/templates/config.d/dptinfo.j2 | 6 + roles/ssh/templates/config.d/perso.j2 | 4 + roles/ssh/templates/config.j2 | 1 + roles/sudo/tasks/main.yml | 12 + roles/sudo/templates/sudoers.j2 | 101 + roles/sudo/templates/sudoers.lecture.j2 | 3 + roles/systemd/tasks/main.yml | 19 + roles/systemd/templates/logind.conf.j2 | 37 + roles/systemd/templates/override.conf.j2 | 3 + roles/terminal/tasks/main.yml | 20 + roles/terminal/templates/terminalrc.j2 | 35 + roles/texlive/tasks/main.yml | 9 + roles/vim/tasks/main.yml | 16 + roles/vim/templates/vimrc.j2 | 46 + roles/xorg/tasks/main.yml | 84 + roles/xorg/templates/30-touchpad.conf.j2 | 6 + roles/xorg/templates/postswitch.j2 | 3 + roles/xorg/templates/xinitrc.j2 | 13 + 70 files changed, 1743 insertions(+), 4216 deletions(-) create mode 100644 group_vars/all.yml create mode 100644 group_vars/laptop.yml create mode 100644 host_vars/dt.adh.crans.org.yml create mode 120000 host_vars/localhost create mode 100644 host_vars/tealc.crans.org.yml create mode 100644 host_vars/templier.adh.crans.org.yml create mode 100644 host_vars/ynerant-pc.fil.sand.auro.re.yml create mode 100644 host_vars/ynerant-thinkpad.wifi.sand.auro.re.yml create mode 100644 host_vars/zamok.crans.org.yml create mode 100644 roles/audio/tasks/main.yml delete mode 100644 roles/baseconfig/files/skel/dot_zshrc delete mode 100644 roles/baseconfig/files/skel/dot_zshrc.local delete mode 100755 roles/baseconfig/files/update-motd.d/00-logo delete mode 100755 roles/baseconfig/files/update-motd.d/10-uname delete mode 100644 roles/baseconfig/handlers/main.yml delete mode 100644 roles/baseconfig/tasks/main.yml create mode 100644 roles/bind/handlers/main.yml create mode 100644 roles/bind/tasks/main.yml create mode 100644 roles/bind/templates/db.j2 create mode 100644 roles/bind/templates/named.conf.local.j2 create mode 100644 roles/cli-utils/tasks/main.yml create mode 100644 roles/cli-utils/templates/bash_aliases.j2 create mode 100644 roles/cli-utils/templates/bashrc.j2 create mode 100644 roles/cli-utils/templates/gitconfig.j2 create mode 100644 roles/cli-utils/templates/inputrc.j2 create mode 100644 roles/cli-utils/templates/tmux.conf.j2 create mode 100644 roles/communication/tasks/main.yml create mode 100644 roles/communication/templates/gtkrc.j2 create mode 100644 roles/communication/templates/index.theme.j2 create mode 100644 roles/communication/templates/settings.ini.j2 create mode 100644 roles/i3/tasks/main.yml create mode 100644 roles/i3/templates/i3.j2 create mode 100644 roles/i3/templates/i3status.j2 create mode 100644 roles/mime/tasks/main.yml create mode 100644 roles/mime/templates/mimeapps.list.j2 create mode 100644 roles/multimedia/tasks/main.yml create mode 100644 roles/multimedia/templates/mpv.conf.j2 create mode 100644 roles/multimedia/templates/zathurarc.j2 create mode 100644 roles/navigateur/tasks/main.yml create mode 100644 roles/notification/tasks/main.yml create mode 100644 roles/notification/templates/dunstrc.j2 create mode 100644 roles/ntp/handlers/main.yml create mode 100644 roles/ntp/tasks/main.yml create mode 100644 roles/ntp/templates/ntp.conf.j2 create mode 100644 roles/pass/tasks/main.yml create mode 100644 roles/scripts/tasks/main.yml create mode 100644 roles/ssh/tasks/main.yml create mode 100644 roles/ssh/templates/config.d/aurore.j2 create mode 100644 roles/ssh/templates/config.d/crans.j2 create mode 100644 roles/ssh/templates/config.d/dptinfo.j2 create mode 100644 roles/ssh/templates/config.d/perso.j2 create mode 100644 roles/ssh/templates/config.j2 create mode 100644 roles/sudo/tasks/main.yml create mode 100644 roles/sudo/templates/sudoers.j2 create mode 100644 roles/sudo/templates/sudoers.lecture.j2 create mode 100644 roles/systemd/tasks/main.yml create mode 100644 roles/systemd/templates/logind.conf.j2 create mode 100644 roles/systemd/templates/override.conf.j2 create mode 100644 roles/terminal/tasks/main.yml create mode 100644 roles/terminal/templates/terminalrc.j2 create mode 100644 roles/texlive/tasks/main.yml create mode 100644 roles/vim/tasks/main.yml create mode 100644 roles/vim/templates/vimrc.j2 create mode 100644 roles/xorg/tasks/main.yml create mode 100644 roles/xorg/templates/30-touchpad.conf.j2 create mode 100644 roles/xorg/templates/postswitch.j2 create mode 100644 roles/xorg/templates/xinitrc.j2 diff --git a/ansible.cfg b/ansible.cfg index b5af5b9..5ebf4d4 100644 --- a/ansible.cfg +++ b/ansible.cfg @@ -1,41 +1,14 @@ -# Ansible configuration - [defaults] - -# Use true Python version -interpreter_python = /usr/bin/python3 - -# Do not create .retry files -retry_files_enabled = False - -# Use inventory inventory = ./hosts - -# Custom header in templates -ansible_managed = Ansible managed, modified on %Y-%m-%d %H:%M:%S by {uid} - -# Do not use cows (with cowsay) -nocows = 1 - -# Do more parallelism -forks = 15 - -# Some SSH connection will take time timeout = 60 +# ask_vault_pass = True [privilege_escalation] - -# Use sudo to get priviledge access -become = True - -# Ask for password -become_ask_pass = True - -[diff] - -# TO know what changed -always = yes - +# become_ask_pass = True [ssh_connection] pipelining = True +retries = 3 + +[diff] +always = yes diff --git a/base.yml b/base.yml index 2d40ddb..1898603 100755 --- a/base.yml +++ b/base.yml @@ -1,7 +1,32 @@ #!/usr/bin/env ansible-playbook --- -# Put a common configuration on all servers + - hosts: all roles: - - baseconfig + - cli-utils + - vim + - ssh + +- hosts: templier.adh.crans.org + roles: + - bind - docker + become: yes + +- hosts: perso + roles: + - sudo + - systemd + - ntp + - texlive + - xorg + - i3 + - terminal + - notification + - mime + - audio + - multimedia + - pass + - communication + - navigateur + # - scripts diff --git a/group_vars/all.yml b/group_vars/all.yml new file mode 100644 index 0000000..d37cca2 --- /dev/null +++ b/group_vars/all.yml @@ -0,0 +1,22 @@ +--- + +pass: + upstream: 'ssh://git@git.ynerant.fr:2222/ynerant/pass' + dest: '.password-store/' + +cliutils: + bash: + bogus_dirs: [] + git: + email: ynerant@crans.org + name: ynerant + signingkey: 3A75C55819C8CF85 + +bind: + domains: + - name: ynerant.fr + administrator: ynerant.crans.org + ipv4: 185.230.78.178 + ipv6: 2a0c:700:12:0:f21f:afff:fee5:34ca + slave: 51.15.199.212 + aliases: [] diff --git a/group_vars/laptop.yml b/group_vars/laptop.yml new file mode 100644 index 0000000..bc3f8f6 --- /dev/null +++ b/group_vars/laptop.yml @@ -0,0 +1,4 @@ +--- +user: + name: ynerant + root: yes diff --git a/host_vars/dt.adh.crans.org.yml b/host_vars/dt.adh.crans.org.yml new file mode 100644 index 0000000..bc3f8f6 --- /dev/null +++ b/host_vars/dt.adh.crans.org.yml @@ -0,0 +1,4 @@ +--- +user: + name: ynerant + root: yes diff --git a/host_vars/localhost b/host_vars/localhost new file mode 120000 index 0000000..35db66a --- /dev/null +++ b/host_vars/localhost @@ -0,0 +1 @@ +ynerant-thinkpad.wifi.sand.auro.re.yml \ No newline at end of file diff --git a/host_vars/tealc.crans.org.yml b/host_vars/tealc.crans.org.yml new file mode 100644 index 0000000..f8003db --- /dev/null +++ b/host_vars/tealc.crans.org.yml @@ -0,0 +1,4 @@ +--- +user: + name: ynerant + root: no diff --git a/host_vars/templier.adh.crans.org.yml b/host_vars/templier.adh.crans.org.yml new file mode 100644 index 0000000..bc3f8f6 --- /dev/null +++ b/host_vars/templier.adh.crans.org.yml @@ -0,0 +1,4 @@ +--- +user: + name: ynerant + root: yes diff --git a/host_vars/ynerant-pc.fil.sand.auro.re.yml b/host_vars/ynerant-pc.fil.sand.auro.re.yml new file mode 100644 index 0000000..cbed7b8 --- /dev/null +++ b/host_vars/ynerant-pc.fil.sand.auro.re.yml @@ -0,0 +1,9 @@ +--- +user: + name: ynerant + root: yes + +laptop: + numpad: true + resolution: 1440p + gpu: true diff --git a/host_vars/ynerant-thinkpad.wifi.sand.auro.re.yml b/host_vars/ynerant-thinkpad.wifi.sand.auro.re.yml new file mode 100644 index 0000000..b112e13 --- /dev/null +++ b/host_vars/ynerant-thinkpad.wifi.sand.auro.re.yml @@ -0,0 +1,9 @@ +--- +user: + name: ynerant + root: yes + +laptop: + numpad: false + resolution: 1080p + gpu: false diff --git a/host_vars/zamok.crans.org.yml b/host_vars/zamok.crans.org.yml new file mode 100644 index 0000000..f8003db --- /dev/null +++ b/host_vars/zamok.crans.org.yml @@ -0,0 +1,4 @@ +--- +user: + name: ynerant + root: no diff --git a/hosts b/hosts index e34b398..1b7eb53 100644 --- a/hosts +++ b/hosts @@ -1,3 +1,17 @@ -[perso] +[server] templier.adh.crans.org dt.adh.crans.org + +[perso] +ynerant-pc.fil.sand.auro.re +ynerant-thinkpad.wifi.sand.auro.re +localhost + +[crans] +odlyd.crans.org +tealc.crans.org +zamok.crans.org + +[all:vars] +# Force remote to use Python 3 +ansible_python_interpreter=/usr/bin/env python3 diff --git a/roles/audio/tasks/main.yml b/roles/audio/tasks/main.yml new file mode 100644 index 0000000..6cc90a2 --- /dev/null +++ b/roles/audio/tasks/main.yml @@ -0,0 +1,12 @@ +--- + +- name: Queries package manager for audio installation + package: + name: + - alsa-utils + - pulseaudio + - pulsemixer + register: pkg_result + retries: 3 + until: pkg_result is succeeded + become: yes diff --git a/roles/baseconfig/files/skel/dot_zshrc b/roles/baseconfig/files/skel/dot_zshrc deleted file mode 100644 index c64a1f8..0000000 --- a/roles/baseconfig/files/skel/dot_zshrc +++ /dev/null @@ -1,3756 +0,0 @@ -# Filename: /etc/zsh/zshrc -# Purpose: config file for zsh (z shell) -# Authors: grml-team (grml.org), (c) Michael Prokop -# Bug-Reports: see http://grml.org/bugs/ -# License: This file is licensed under the GPL v2. -################################################################################ -# This file is sourced only for interactive shells. It -# should contain commands to set up aliases, functions, -# options, key bindings, etc. -# -# Global Order: zshenv, zprofile, zshrc, zlogin -################################################################################ - -# USAGE -# If you are using this file as your ~/.zshrc file, please use ~/.zshrc.pre -# and ~/.zshrc.local for your own customisations. The former file is read -# before ~/.zshrc, the latter is read after it. Also, consider reading the -# refcard and the reference manual for this setup, both available from: -# - -# Contributing: -# If you want to help to improve grml's zsh setup, clone the grml-etc-core -# repository from git.grml.org: -# git clone git://git.grml.org/grml-etc-core.git -# -# Make your changes, commit them; use 'git format-patch' to create a series -# of patches and send those to the following address via 'git send-email': -# grml-etc-core@grml.org -# -# Doing so makes sure the right people get your patches for review and -# possibly inclusion. - -# zsh-refcard-tag documentation: -# You may notice strange looking comments in this file. -# These are there for a purpose. grml's zsh-refcard can now be -# automatically generated from the contents of the actual configuration -# file. However, we need a little extra information on which comments -# and what lines of code to take into account (and for what purpose). -# -# Here is what they mean: -# -# List of tags (comment types) used: -# #a# Next line contains an important alias, that should -# be included in the grml-zsh-refcard. -# (placement tag: @@INSERT-aliases@@) -# #f# Next line contains the beginning of an important function. -# (placement tag: @@INSERT-functions@@) -# #v# Next line contains an important variable. -# (placement tag: @@INSERT-variables@@) -# #k# Next line contains an important keybinding. -# (placement tag: @@INSERT-keybindings@@) -# #d# Hashed directories list generation: -# start denotes the start of a list of 'hash -d' -# definitions. -# end denotes its end. -# (placement tag: @@INSERT-hasheddirs@@) -# #A# Abbreviation expansion list generation: -# start denotes the beginning of abbreviations. -# end denotes their end. -# Lines within this section that end in '#d .*' provide -# extra documentation to be included in the refcard. -# (placement tag: @@INSERT-abbrev@@) -# #m# This tag allows you to manually generate refcard entries -# for code lines that are hard/impossible to parse. -# Example: -# #m# k ESC-h Call the run-help function -# That would add a refcard entry in the keybindings table -# for 'ESC-h' with the given comment. -# So the syntax is: #m#
-# #o# This tag lets you insert entries to the 'other' hash. -# Generally, this should not be used. It is there for -# things that cannot be done easily in another way. -# (placement tag: @@INSERT-other-foobar@@) -# -# All of these tags (except for m and o) take two arguments, the first -# within the tag, the other after the tag: -# -# #
# -# -# Where
is really just a number, which are defined by the -# @secmap array on top of 'genrefcard.pl'. The reason for numbers -# instead of names is, that for the reader, the tag should not differ -# much from a regular comment. For zsh, it is a regular comment indeed. -# The numbers have got the following meanings: -# 0 -> "default" -# 1 -> "system" -# 2 -> "user" -# 3 -> "debian" -# 4 -> "search" -# 5 -> "shortcuts" -# 6 -> "services" -# -# So, the following will add an entry to the 'functions' table in the -# 'system' section, with a (hopefully) descriptive comment: -# #f1# Edit an alias via zle -# edalias() { -# -# It will then show up in the @@INSERT-aliases-system@@ replacement tag -# that can be found in 'grml-zsh-refcard.tex.in'. -# If the section number is omitted, the 'default' section is assumed. -# Furthermore, in 'grml-zsh-refcard.tex.in' @@INSERT-aliases@@ is -# exactly the same as @@INSERT-aliases-default@@. If you want a list of -# *all* aliases, for example, use @@INSERT-aliases-all@@. - -# zsh profiling -# just execute 'ZSH_PROFILE_RC=1 zsh' and run 'zprof' to get the details -if [[ $ZSH_PROFILE_RC -gt 0 ]] ; then - zmodload zsh/zprof -fi - -# load .zshrc.pre to give the user the chance to overwrite the defaults -[[ -r ${ZDOTDIR:-${HOME}}/.zshrc.pre ]] && source ${ZDOTDIR:-${HOME}}/.zshrc.pre - -# check for version/system -# check for versions (compatibility reasons) -function is4 () { - [[ $ZSH_VERSION == <4->* ]] && return 0 - return 1 -} - -function is41 () { - [[ $ZSH_VERSION == 4.<1->* || $ZSH_VERSION == <5->* ]] && return 0 - return 1 -} - -function is42 () { - [[ $ZSH_VERSION == 4.<2->* || $ZSH_VERSION == <5->* ]] && return 0 - return 1 -} - -function is425 () { - [[ $ZSH_VERSION == 4.2.<5->* || $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0 - return 1 -} - -function is43 () { - [[ $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0 - return 1 -} - -function is433 () { - [[ $ZSH_VERSION == 4.3.<3->* || $ZSH_VERSION == 4.<4->* \ - || $ZSH_VERSION == <5->* ]] && return 0 - return 1 -} - -function is437 () { - [[ $ZSH_VERSION == 4.3.<7->* || $ZSH_VERSION == 4.<4->* \ - || $ZSH_VERSION == <5->* ]] && return 0 - return 1 -} - -function is439 () { - [[ $ZSH_VERSION == 4.3.<9->* || $ZSH_VERSION == 4.<4->* \ - || $ZSH_VERSION == <5->* ]] && return 0 - return 1 -} - -#f1# Checks whether or not you're running grml -function isgrml () { - [[ -f /etc/grml_version ]] && return 0 - return 1 -} - -#f1# Checks whether or not you're running a grml cd -function isgrmlcd () { - [[ -f /etc/grml_cd ]] && return 0 - return 1 -} - -if isgrml ; then -#f1# Checks whether or not you're running grml-small - function isgrmlsmall () { - if [[ ${${${(f)"$( autologin -# Thanks go to Bart Schaefer! -isgrml && function checkhome () { - if [[ -z "$ALREADY_DID_CD_HOME" ]] ; then - export ALREADY_DID_CD_HOME=$HOME - cd - fi -} - -# check for zsh v3.1.7+ - -if ! [[ ${ZSH_VERSION} == 3.1.<7->* \ - || ${ZSH_VERSION} == 3.<2->.<->* \ - || ${ZSH_VERSION} == <4->.<->* ]] ; then - - printf '-!-\n' - printf '-!- In this configuration we try to make use of features, that only\n' - printf '-!- require version 3.1.7 of the shell; That way this setup can be\n' - printf '-!- used with a wide range of zsh versions, while using fairly\n' - printf '-!- advanced features in all supported versions.\n' - printf '-!-\n' - printf '-!- However, you are running zsh version %s.\n' "$ZSH_VERSION" - printf '-!-\n' - printf '-!- While this *may* work, it might as well fail.\n' - printf '-!- Please consider updating to at least version 3.1.7 of zsh.\n' - printf '-!-\n' - printf '-!- DO NOT EXPECT THIS TO WORK FLAWLESSLY!\n' - printf '-!- If it does today, you'\''ve been lucky.\n' - printf '-!-\n' - printf '-!- Ye been warned!\n' - printf '-!-\n' - - function zstyle () { : } -fi - -# autoload wrapper - use this one instead of autoload directly -# We need to define this function as early as this, because autoloading -# 'is-at-least()' needs it. -function zrcautoload () { - emulate -L zsh - setopt extended_glob - local fdir ffile - local -i ffound - - ffile=$1 - (( ffound = 0 )) - for fdir in ${fpath} ; do - [[ -e ${fdir}/${ffile} ]] && (( ffound = 1 )) - done - - (( ffound == 0 )) && return 1 - if [[ $ZSH_VERSION == 3.1.<6-> || $ZSH_VERSION == <4->* ]] ; then - autoload -U ${ffile} || return 1 - else - autoload ${ffile} || return 1 - fi - return 0 -} - -# The following is the ‘add-zsh-hook’ function from zsh upstream. It is -# included here to make the setup work with older versions of zsh (prior to -# 4.3.7) in which this function had a bug that triggers annoying errors during -# shell startup. This is exactly upstreams code from f0068edb4888a4d8fe94def, -# with just a few adjustments in coding style to make the function look more -# compact. This definition can be removed as soon as we raise the minimum -# version requirement to 4.3.7 or newer. -function add-zsh-hook () { - # Add to HOOK the given FUNCTION. - # HOOK is one of chpwd, precmd, preexec, periodic, zshaddhistory, - # zshexit, zsh_directory_name (the _functions subscript is not required). - # - # With -d, remove the function from the hook instead; delete the hook - # variable if it is empty. - # - # -D behaves like -d, but pattern characters are active in the function - # name, so any matching function will be deleted from the hook. - # - # Without -d, the FUNCTION is marked for autoload; -U is passed down to - # autoload if that is given, as are -z and -k. (This is harmless if the - # function is actually defined inline.) - emulate -L zsh - local -a hooktypes - hooktypes=( - chpwd precmd preexec periodic zshaddhistory zshexit - zsh_directory_name - ) - local usage="Usage: $0 hook function\nValid hooks are:\n $hooktypes" - local opt - local -a autoopts - integer del list help - while getopts "dDhLUzk" opt; do - case $opt in - (d) del=1 ;; - (D) del=2 ;; - (h) help=1 ;; - (L) list=1 ;; - ([Uzk]) autoopts+=(-$opt) ;; - (*) return 1 ;; - esac - done - shift $(( OPTIND - 1 )) - if (( list )); then - typeset -mp "(${1:-${(@j:|:)hooktypes}})_functions" - return $? - elif (( help || $# != 2 || ${hooktypes[(I)$1]} == 0 )); then - print -u$(( 2 - help )) $usage - return $(( 1 - help )) - fi - local hook="${1}_functions" - local fn="$2" - if (( del )); then - # delete, if hook is set - if (( ${(P)+hook} )); then - if (( del == 2 )); then - set -A $hook ${(P)hook:#${~fn}} - else - set -A $hook ${(P)hook:#$fn} - fi - # unset if no remaining entries --- this can give better - # performance in some cases - if (( ! ${(P)#hook} )); then - unset $hook - fi - fi - else - if (( ${(P)+hook} )); then - if (( ${${(P)hook}[(I)$fn]} == 0 )); then - set -A $hook ${(P)hook} $fn - fi - else - set -A $hook $fn - fi - autoload $autoopts -- $fn - fi -} - -# Load is-at-least() for more precise version checks Note that this test will -# *always* fail, if the is-at-least function could not be marked for -# autoloading. -zrcautoload is-at-least || function is-at-least () { return 1 } - -# set some important options (as early as possible) - -# append history list to the history file; this is the default but we make sure -# because it's required for share_history. -setopt append_history - -# import new commands from the history file also in other zsh-session -is4 && setopt share_history - -# save each command's beginning timestamp and the duration to the history file -setopt extended_history - -# If a new command line being added to the history list duplicates an older -# one, the older command is removed from the list -is4 && setopt histignorealldups - -# remove command lines from the history list when the first character on the -# line is a space -setopt histignorespace - -# if a command is issued that can't be executed as a normal command, and the -# command is the name of a directory, perform the cd command to that directory. -setopt auto_cd - -# in order to use #, ~ and ^ for filename generation grep word -# *~(*.gz|*.bz|*.bz2|*.zip|*.Z) -> searches for word not in compressed files -# don't forget to quote '^', '~' and '#'! -setopt extended_glob - -# display PID when suspending processes as well -setopt longlistjobs - -# report the status of backgrounds jobs immediately -setopt notify - -# whenever a command completion is attempted, make sure the entire command path -# is hashed first. -setopt hash_list_all - -# not just at the end -setopt completeinword - -# Don't send SIGHUP to background processes when the shell exits. -setopt nohup - -# make cd push the old directory onto the directory stack. -setopt auto_pushd - -# avoid "beep"ing -setopt nobeep - -# don't push the same dir twice. -setopt pushd_ignore_dups - -# * shouldn't match dotfiles. ever. -setopt noglobdots - -# use zsh style word splitting -setopt noshwordsplit - -# don't error out when unset parameters are used -setopt unset - -# setting some default values -NOCOR=${NOCOR:-0} -NOMENU=${NOMENU:-0} -NOPRECMD=${NOPRECMD:-0} -COMMAND_NOT_FOUND=${COMMAND_NOT_FOUND:-0} -GRML_ZSH_CNF_HANDLER=${GRML_ZSH_CNF_HANDLER:-/usr/share/command-not-found/command-not-found} -GRML_DISPLAY_BATTERY=${GRML_DISPLAY_BATTERY:-${BATTERY:-0}} -GRMLSMALL_SPECIFIC=${GRMLSMALL_SPECIFIC:-1} -ZSH_NO_DEFAULT_LOCALE=${ZSH_NO_DEFAULT_LOCALE:-0} - -typeset -ga ls_options -typeset -ga grep_options -if ls --color=auto / >/dev/null 2>&1; then - ls_options+=( --color=auto ) -elif ls -G / >/dev/null 2>&1; then - ls_options+=( -G ) -fi -if grep --color=auto -q "a" <<< "a" >/dev/null 2>&1; then - grep_options+=( --color=auto ) -fi - -# utility functions -# this function checks if a command exists and returns either true -# or false. This avoids using 'which' and 'whence', which will -# avoid problems with aliases for which on certain weird systems. :-) -# Usage: check_com [-c|-g] word -# -c only checks for external commands -# -g does the usual tests and also checks for global aliases -function check_com () { - emulate -L zsh - local -i comonly gatoo - comonly=0 - gatoo=0 - - if [[ $1 == '-c' ]] ; then - comonly=1 - shift 1 - elif [[ $1 == '-g' ]] ; then - gatoo=1 - shift 1 - fi - - if (( ${#argv} != 1 )) ; then - printf 'usage: check_com [-c|-g] \n' >&2 - return 1 - fi - - if (( comonly > 0 )) ; then - (( ${+commands[$1]} )) && return 0 - return 1 - fi - - if (( ${+commands[$1]} )) \ - || (( ${+functions[$1]} )) \ - || (( ${+aliases[$1]} )) \ - || (( ${+reswords[(r)$1]} )) ; then - return 0 - fi - - if (( gatoo > 0 )) && (( ${+galiases[$1]} )) ; then - return 0 - fi - - return 1 -} - -# creates an alias and precedes the command with -# sudo if $EUID is not zero. -function salias () { - emulate -L zsh - local only=0 ; local multi=0 - local key val - while getopts ":hao" opt; do - case $opt in - o) only=1 ;; - a) multi=1 ;; - h) - printf 'usage: salias [-hoa] \n' - printf ' -h shows this help text.\n' - printf ' -a replace '\'' ; '\'' sequences with '\'' ; sudo '\''.\n' - printf ' be careful using this option.\n' - printf ' -o only sets an alias if a preceding sudo would be needed.\n' - return 0 - ;; - *) salias -h >&2; return 1 ;; - esac - done - shift "$((OPTIND-1))" - - if (( ${#argv} > 1 )) ; then - printf 'Too many arguments %s\n' "${#argv}" - return 1 - fi - - key="${1%%\=*}" ; val="${1#*\=}" - if (( EUID == 0 )) && (( only == 0 )); then - alias -- "${key}=${val}" - elif (( EUID > 0 )) ; then - (( multi > 0 )) && val="${val// ; / ; sudo }" - alias -- "${key}=sudo ${val}" - fi - - return 0 -} - -# Check if we can read given files and source those we can. -function xsource () { - if (( ${#argv} < 1 )) ; then - printf 'usage: xsource FILE(s)...\n' >&2 - return 1 - fi - - while (( ${#argv} > 0 )) ; do - [[ -r "$1" ]] && source "$1" - shift - done - return 0 -} - -# Check if we can read a given file and 'cat(1)' it. -function xcat () { - emulate -L zsh - if (( ${#argv} != 1 )) ; then - printf 'usage: xcat FILE\n' >&2 - return 1 - fi - - [[ -r $1 ]] && cat $1 - return 0 -} - -# Remove these functions again, they are of use only in these -# setup files. This should be called at the end of .zshrc. -function xunfunction () { - emulate -L zsh - local -a funcs - local func - funcs=(salias xcat xsource xunfunction zrcautoload zrcautozle) - for func in $funcs ; do - [[ -n ${functions[$func]} ]] \ - && unfunction $func - done - return 0 -} - -# this allows us to stay in sync with grml's zshrc and put own -# modifications in ~/.zshrc.local -function zrclocal () { - xsource "/etc/zsh/zshrc.local" - xsource "${ZDOTDIR:-${HOME}}/.zshrc.local" - return 0 -} - -# locale setup -if (( ZSH_NO_DEFAULT_LOCALE == 0 )); then - xsource "/etc/default/locale" -fi - -for var in LANG LC_ALL LC_MESSAGES ; do - [[ -n ${(P)var} ]] && export $var -done -builtin unset -v var - -# set some variables -if check_com -c vim ; then -#v# - export EDITOR=${EDITOR:-vim} -else - export EDITOR=${EDITOR:-vi} -fi - -#v# -export PAGER=${PAGER:-less} - -#v# -export MAIL=${MAIL:-/var/mail/$USER} - -# color setup for ls: -check_com -c dircolors && eval $(dircolors -b) -# color setup for ls on OS X / FreeBSD: -isdarwin && export CLICOLOR=1 -isfreebsd && export CLICOLOR=1 - -# do MacPorts setup on darwin -if isdarwin && [[ -d /opt/local ]]; then - # Note: PATH gets set in /etc/zprofile on Darwin, so this can't go into - # zshenv. - PATH="/opt/local/bin:/opt/local/sbin:$PATH" - MANPATH="/opt/local/share/man:$MANPATH" -fi -# do Fink setup on darwin -isdarwin && xsource /sw/bin/init.sh - -# load our function and completion directories -for fdir in /usr/share/grml/zsh/completion /usr/share/grml/zsh/functions; do - fpath=( ${fdir} ${fdir}/**/*(/N) ${fpath} ) -done -typeset -aU ffiles -ffiles=(/usr/share/grml/zsh/functions/**/[^_]*[^~](N.:t)) -(( ${#ffiles} > 0 )) && autoload -U "${ffiles[@]}" -unset -v fdir ffiles - -# support colors in less -export LESS_TERMCAP_mb=$'\E[01;31m' -export LESS_TERMCAP_md=$'\E[01;31m' -export LESS_TERMCAP_me=$'\E[0m' -export LESS_TERMCAP_se=$'\E[0m' -export LESS_TERMCAP_so=$'\E[01;44;33m' -export LESS_TERMCAP_ue=$'\E[0m' -export LESS_TERMCAP_us=$'\E[01;32m' - -# mailchecks -MAILCHECK=30 - -# report about cpu-/system-/user-time of command if running longer than -# 5 seconds -REPORTTIME=5 - -# watch for everyone but me and root -watch=(notme root) - -# automatically remove duplicates from these arrays -typeset -U path PATH cdpath CDPATH fpath FPATH manpath MANPATH - -# Load a few modules -is4 && \ -for mod in parameter complist deltochar mathfunc ; do - zmodload -i zsh/${mod} 2>/dev/null || print "Notice: no ${mod} available :(" -done && builtin unset -v mod - -# autoload zsh modules when they are referenced -if is4 ; then - zmodload -a zsh/stat zstat - zmodload -a zsh/zpty zpty - zmodload -ap zsh/mapfile mapfile -fi - -# completion system -COMPDUMPFILE=${COMPDUMPFILE:-${ZDOTDIR:-${HOME}}/.zcompdump} -if zrcautoload compinit ; then - compinit -d ${COMPDUMPFILE} || print 'Notice: no compinit available :(' -else - print 'Notice: no compinit available :(' - function compdef { } -fi - -# completion system - -# called later (via is4 && grmlcomp) -# note: use 'zstyle' for getting current settings -# press ^xh (control-x h) for getting tags in context; ^x? (control-x ?) to run complete_debug with trace output -function grmlcomp () { - # TODO: This could use some additional information - - # Make sure the completion system is initialised - (( ${+_comps} )) || return 1 - - # allow one error for every three characters typed in approximate completer - zstyle ':completion:*:approximate:' max-errors 'reply=( $((($#PREFIX+$#SUFFIX)/3 )) numeric )' - - # don't complete backup files as executables - zstyle ':completion:*:complete:-command-::commands' ignored-patterns '(aptitude-*|*\~)' - - # start menu completion only if it could find no unambiguous initial string - zstyle ':completion:*:correct:*' insert-unambiguous true - zstyle ':completion:*:corrections' format $'%{\e[0;31m%}%d (errors: %e)%{\e[0m%}' - zstyle ':completion:*:correct:*' original true - - # activate color-completion - zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS} - - # format on completion - zstyle ':completion:*:descriptions' format $'%{\e[0;31m%}completing %B%d%b%{\e[0m%}' - - # automatically complete 'cd -' and 'cd -' with menu - # zstyle ':completion:*:*:cd:*:directory-stack' menu yes select - - # insert all expansions for expand completer - zstyle ':completion:*:expand:*' tag-order all-expansions - zstyle ':completion:*:history-words' list false - - # activate menu - zstyle ':completion:*:history-words' menu yes - - # ignore duplicate entries - zstyle ':completion:*:history-words' remove-all-dups yes - zstyle ':completion:*:history-words' stop yes - - # match uppercase from lowercase - zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}' - - # separate matches into groups - zstyle ':completion:*:matches' group 'yes' - zstyle ':completion:*' group-name '' - - if [[ "$NOMENU" -eq 0 ]] ; then - # if there are more than 5 options allow selecting from a menu - zstyle ':completion:*' menu select=5 - else - # don't use any menus at all - setopt no_auto_menu - fi - - zstyle ':completion:*:messages' format '%d' - zstyle ':completion:*:options' auto-description '%d' - - # describe options in full - zstyle ':completion:*:options' description 'yes' - - # on processes completion complete all user processes - zstyle ':completion:*:processes' command 'ps -au$USER' - - # offer indexes before parameters in subscripts - zstyle ':completion:*:*:-subscript-:*' tag-order indexes parameters - - # provide verbose completion information - zstyle ':completion:*' verbose true - - # recent (as of Dec 2007) zsh versions are able to provide descriptions - # for commands (read: 1st word in the line) that it will list for the user - # to choose from. The following disables that, because it's not exactly fast. - zstyle ':completion:*:-command-:*:' verbose false - - # set format for warnings - zstyle ':completion:*:warnings' format $'%{\e[0;31m%}No matches for:%{\e[0m%} %d' - - # define files to ignore for zcompile - zstyle ':completion:*:*:zcompile:*' ignored-patterns '(*~|*.zwc)' - zstyle ':completion:correct:' prompt 'correct to: %e' - - # Ignore completion functions for commands you don't have: - zstyle ':completion::(^approximate*):*:functions' ignored-patterns '_*' - - # Provide more processes in completion of programs like killall: - zstyle ':completion:*:processes-names' command 'ps c -u ${USER} -o command | uniq' - - # complete manual by their section - zstyle ':completion:*:manuals' separate-sections true - zstyle ':completion:*:manuals.*' insert-sections true - zstyle ':completion:*:man:*' menu yes select - - # Search path for sudo completion - zstyle ':completion:*:sudo:*' command-path /usr/local/sbin \ - /usr/local/bin \ - /usr/sbin \ - /usr/bin \ - /sbin \ - /bin \ - /usr/X11R6/bin - - # provide .. as a completion - zstyle ':completion:*' special-dirs .. - - # run rehash on completion so new installed program are found automatically: - function _force_rehash () { - (( CURRENT == 1 )) && rehash - return 1 - } - - ## correction - # some people don't like the automatic correction - so run 'NOCOR=1 zsh' to deactivate it - if [[ "$NOCOR" -gt 0 ]] ; then - zstyle ':completion:*' completer _oldlist _expand _force_rehash _complete _files _ignored - setopt nocorrect - else - # try to be smart about when to use what completer... - setopt correct - zstyle -e ':completion:*' completer ' - if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]] ; then - _last_try="$HISTNO$BUFFER$CURSOR" - reply=(_complete _match _ignored _prefix _files) - else - if [[ $words[1] == (rm|mv) ]] ; then - reply=(_complete _files) - else - reply=(_oldlist _expand _force_rehash _complete _ignored _correct _approximate _files) - fi - fi' - fi - - # command for process lists, the local web server details and host completion - zstyle ':completion:*:urls' local 'www' '/var/www/' 'public_html' - - # Some functions, like _apt and _dpkg, are very slow. We can use a cache in - # order to speed things up - if [[ ${GRML_COMP_CACHING:-yes} == yes ]]; then - GRML_COMP_CACHE_DIR=${GRML_COMP_CACHE_DIR:-${ZDOTDIR:-$HOME}/.cache} - if [[ ! -d ${GRML_COMP_CACHE_DIR} ]]; then - command mkdir -p "${GRML_COMP_CACHE_DIR}" - fi - zstyle ':completion:*' use-cache yes - zstyle ':completion:*:complete:*' cache-path "${GRML_COMP_CACHE_DIR}" - fi - - # host completion - if is42 ; then - [[ -r ~/.ssh/config ]] && _ssh_config_hosts=(${${(s: :)${(ps:\t:)${${(@M)${(f)"$(<$HOME/.ssh/config)"}:#Host *}#Host }}}:#*[*?]*}) || _ssh_config_hosts=() - [[ -r ~/.ssh/known_hosts ]] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=() - [[ -r /etc/hosts ]] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(, Bernhard Tittelbach -function beginning-or-end-of-somewhere () { - local hno=$HISTNO - if [[ ( "${LBUFFER[-1]}" == $'\n' && "${WIDGET}" == beginning-of* ) || \ - ( "${RBUFFER[1]}" == $'\n' && "${WIDGET}" == end-of* ) ]]; then - zle .${WIDGET:s/somewhere/buffer-or-history/} "$@" - else - zle .${WIDGET:s/somewhere/line-hist/} "$@" - if (( HISTNO != hno )); then - zle .${WIDGET:s/somewhere/buffer-or-history/} "$@" - fi - fi -} -zle -N beginning-of-somewhere beginning-or-end-of-somewhere -zle -N end-of-somewhere beginning-or-end-of-somewhere - -# add a command line to the shells history without executing it -function commit-to-history () { - print -s ${(z)BUFFER} - zle send-break -} -zle -N commit-to-history - -# only slash should be considered as a word separator: -function slash-backward-kill-word () { - local WORDCHARS="${WORDCHARS:s@/@}" - # zle backward-word - zle backward-kill-word -} -zle -N slash-backward-kill-word - -# a generic accept-line wrapper - -# This widget can prevent unwanted autocorrections from command-name -# to _command-name, rehash automatically on enter and call any number -# of builtin and user-defined widgets in different contexts. -# -# For a broader description, see: -# -# -# The code is imported from the file 'zsh/functions/accept-line' from -# , which -# distributed under the same terms as zsh itself. - -# A newly added command will may not be found or will cause false -# correction attempts, if you got auto-correction set. By setting the -# following style, we force accept-line() to rehash, if it cannot -# find the first word on the command line in the $command[] hash. -zstyle ':acceptline:*' rehash true - -function Accept-Line () { - setopt localoptions noksharrays - local -a subs - local -xi aldone - local sub - local alcontext=${1:-$alcontext} - - zstyle -a ":acceptline:${alcontext}" actions subs - - (( ${#subs} < 1 )) && return 0 - - (( aldone = 0 )) - for sub in ${subs} ; do - [[ ${sub} == 'accept-line' ]] && sub='.accept-line' - zle ${sub} - - (( aldone > 0 )) && break - done -} - -function Accept-Line-getdefault () { - emulate -L zsh - local default_action - - zstyle -s ":acceptline:${alcontext}" default_action default_action - case ${default_action} in - ((accept-line|)) - printf ".accept-line" - ;; - (*) - printf ${default_action} - ;; - esac -} - -function Accept-Line-HandleContext () { - zle Accept-Line - - default_action=$(Accept-Line-getdefault) - zstyle -T ":acceptline:${alcontext}" call_default \ - && zle ${default_action} -} - -function accept-line () { - setopt localoptions noksharrays - local -a cmdline - local -x alcontext - local buf com fname format msg default_action - - alcontext='default' - buf="${BUFFER}" - cmdline=(${(z)BUFFER}) - com="${cmdline[1]}" - fname="_${com}" - - Accept-Line 'preprocess' - - zstyle -t ":acceptline:${alcontext}" rehash \ - && [[ -z ${commands[$com]} ]] \ - && rehash - - if [[ -n ${com} ]] \ - && [[ -n ${reswords[(r)$com]} ]] \ - || [[ -n ${aliases[$com]} ]] \ - || [[ -n ${functions[$com]} ]] \ - || [[ -n ${builtins[$com]} ]] \ - || [[ -n ${commands[$com]} ]] ; then - - # there is something sensible to execute, just do it. - alcontext='normal' - Accept-Line-HandleContext - - return - fi - - if [[ -o correct ]] \ - || [[ -o correctall ]] \ - && [[ -n ${functions[$fname]} ]] ; then - - # nothing there to execute but there is a function called - # _command_name; a completion widget. Makes no sense to - # call it on the commandline, but the correct{,all} options - # will ask for it nevertheless, so warn the user. - if [[ ${LASTWIDGET} == 'accept-line' ]] ; then - # Okay, we warned the user before, he called us again, - # so have it his way. - alcontext='force' - Accept-Line-HandleContext - - return - fi - - if zstyle -t ":acceptline:${alcontext}" nocompwarn ; then - alcontext='normal' - Accept-Line-HandleContext - else - # prepare warning message for the user, configurable via zstyle. - zstyle -s ":acceptline:${alcontext}" compwarnfmt msg - - if [[ -z ${msg} ]] ; then - msg="%c will not execute and completion %f exists." - fi - - zformat -f msg "${msg}" "c:${com}" "f:${fname}" - - zle -M -- "${msg}" - fi - return - elif [[ -n ${buf//[$' \t\n']##/} ]] ; then - # If we are here, the commandline contains something that is not - # executable, which is neither subject to _command_name correction - # and is not empty. might be a variable assignment - alcontext='misc' - Accept-Line-HandleContext - - return - fi - - # If we got this far, the commandline only contains whitespace, or is empty. - alcontext='empty' - Accept-Line-HandleContext -} - -zle -N accept-line -zle -N Accept-Line -zle -N Accept-Line-HandleContext - -# power completion / abbreviation expansion / buffer expansion -# see http://zshwiki.org/home/examples/zleiab for details -# less risky than the global aliases but powerful as well -# just type the abbreviation key and afterwards 'ctrl-x .' to expand it -declare -A abk -setopt extendedglob -setopt interactivecomments -abk=( -# key # value (#d additional doc string) -#A# start - '...' '../..' - '....' '../../..' - 'BG' '& exit' - 'C' '| wc -l' - 'G' '|& grep '${grep_options:+"${grep_options[*]}"} - 'H' '| head' - 'Hl' ' --help |& less -r' #d (Display help in pager) - 'L' '| less' - 'LL' '|& less -r' - 'M' '| most' - 'N' '&>/dev/null' #d (No Output) - 'R' '| tr A-z N-za-m' #d (ROT13) - 'SL' '| sort | less' - 'S' '| sort -u' - 'T' '| tail' - 'V' '|& vim -' -#A# end - 'co' './configure && make && sudo make install' -) - -function zleiab () { - emulate -L zsh - setopt extendedglob - local MATCH - - LBUFFER=${LBUFFER%%(#m)[.\-+:|_a-zA-Z0-9]#} - LBUFFER+=${abk[$MATCH]:-$MATCH} -} - -zle -N zleiab - -function help-show-abk () { - zle -M "$(print "Available abbreviations for expansion:"; print -a -C 2 ${(kv)abk})" -} - -zle -N help-show-abk - -# press "ctrl-x d" to insert the actual date in the form yyyy-mm-dd -function insert-datestamp () { LBUFFER+=${(%):-'%D{%Y-%m-%d}'}; } -zle -N insert-datestamp - -# press esc-m for inserting last typed word again (thanks to caphuso!) -function insert-last-typed-word () { zle insert-last-word -- 0 -1 }; -zle -N insert-last-typed-word; - -function grml-zsh-fg () { - if (( ${#jobstates} )); then - zle .push-input - [[ -o hist_ignore_space ]] && BUFFER=' ' || BUFFER='' - BUFFER="${BUFFER}fg" - zle .accept-line - else - zle -M 'No background jobs. Doing nothing.' - fi -} -zle -N grml-zsh-fg - -# run command line as user root via sudo: -function sudo-command-line () { - [[ -z $BUFFER ]] && zle up-history - if [[ $BUFFER != sudo\ * ]]; then - BUFFER="sudo $BUFFER" - CURSOR=$(( CURSOR+5 )) - fi -} -zle -N sudo-command-line - -### jump behind the first word on the cmdline. -### useful to add options. -function jump_after_first_word () { - local words - words=(${(z)BUFFER}) - - if (( ${#words} <= 1 )) ; then - CURSOR=${#BUFFER} - else - CURSOR=${#${words[1]}} - fi -} -zle -N jump_after_first_word - -#f5# Create directory under cursor or the selected area -function inplaceMkDirs () { - # Press ctrl-xM to create the directory under the cursor or the selected area. - # To select an area press ctrl-@ or ctrl-space and use the cursor. - # Use case: you type "mv abc ~/testa/testb/testc/" and remember that the - # directory does not exist yet -> press ctrl-XM and problem solved - local PATHTOMKDIR - if ((REGION_ACTIVE==1)); then - local F=$MARK T=$CURSOR - if [[ $F -gt $T ]]; then - F=${CURSOR} - T=${MARK} - fi - # get marked area from buffer and eliminate whitespace - PATHTOMKDIR=${BUFFER[F+1,T]%%[[:space:]]##} - PATHTOMKDIR=${PATHTOMKDIR##[[:space:]]##} - else - local bufwords iword - bufwords=(${(z)LBUFFER}) - iword=${#bufwords} - bufwords=(${(z)BUFFER}) - PATHTOMKDIR="${(Q)bufwords[iword]}" - fi - [[ -z "${PATHTOMKDIR}" ]] && return 1 - PATHTOMKDIR=${~PATHTOMKDIR} - if [[ -e "${PATHTOMKDIR}" ]]; then - zle -M " path already exists, doing nothing" - else - zle -M "$(mkdir -p -v "${PATHTOMKDIR}")" - zle end-of-line - fi -} - -zle -N inplaceMkDirs - -#v1# set number of lines to display per page -HELP_LINES_PER_PAGE=20 -#v1# set location of help-zle cache file -HELP_ZLE_CACHE_FILE=~/.cache/zsh_help_zle_lines.zsh -# helper function for help-zle, actually generates the help text -function help_zle_parse_keybindings () { - emulate -L zsh - setopt extendedglob - unsetopt ksharrays #indexing starts at 1 - - #v1# choose files that help-zle will parse for keybindings - ((${+HELPZLE_KEYBINDING_FILES})) || HELPZLE_KEYBINDING_FILES=( /etc/zsh/zshrc ~/.zshrc.pre ~/.zshrc ~/.zshrc.local ) - - if [[ -r $HELP_ZLE_CACHE_FILE ]]; then - local load_cache=0 - local f - for f ($HELPZLE_KEYBINDING_FILES) [[ $f -nt $HELP_ZLE_CACHE_FILE ]] && load_cache=1 - [[ $load_cache -eq 0 ]] && . $HELP_ZLE_CACHE_FILE && return - fi - - #fill with default keybindings, possibly to be overwritten in a file later - #Note that due to zsh inconsistency on escaping assoc array keys, we encase the key in '' which we will remove later - local -A help_zle_keybindings - help_zle_keybindings['@']="set MARK" - help_zle_keybindings['xj']="vi-join lines" - help_zle_keybindings['xb']="jump to matching brace" - help_zle_keybindings['xu']="undo" - help_zle_keybindings['_']="undo" - help_zle_keybindings['xf']="find in cmdline" - help_zle_keybindings['a']="goto beginning of line" - help_zle_keybindings['e']="goto end of line" - help_zle_keybindings['t']="transpose charaters" - help_zle_keybindings['t']="transpose words" - help_zle_keybindings['s']="spellcheck word" - help_zle_keybindings['k']="backward kill buffer" - help_zle_keybindings['u']="forward kill buffer" - help_zle_keybindings['y']="insert previously killed word/string" - help_zle_keybindings["'"]="quote line" - help_zle_keybindings['"']="quote from mark to cursor" - help_zle_keybindings['']="repeat next cmd/char times (-10a -> -10 times 'a')" - help_zle_keybindings['u']="make next word Uppercase" - help_zle_keybindings['l']="make next word lowercase" - help_zle_keybindings['xd']="preview expansion under cursor" - help_zle_keybindings['q']="push current CL into background, freeing it. Restore on next CL" - help_zle_keybindings['.']="insert (and interate through) last word from prev CLs" - help_zle_keybindings[',']="complete word from newer history (consecutive hits)" - help_zle_keybindings['m']="repeat last typed word on current CL" - help_zle_keybindings['v']="insert next keypress symbol literally (e.g. for bindkey)" - help_zle_keybindings['!!:n*']="insert last n arguments of last command" - help_zle_keybindings['!!:n-']="insert arguments n..N-2 of last command (e.g. mv s s d)" - help_zle_keybindings['h']="show help/manpage for current command" - - #init global variables - unset help_zle_lines help_zle_sln - typeset -g -a help_zle_lines - typeset -g help_zle_sln=1 - - local k v f cline - local lastkeybind_desc contents #last description starting with #k# that we found - local num_lines_elapsed=0 #number of lines between last description and keybinding - #search config files in the order they a called (and thus the order in which they overwrite keybindings) - for f in $HELPZLE_KEYBINDING_FILES; do - [[ -r "$f" ]] || continue #not readable ? skip it - contents="$(<$f)" - for cline in "${(f)contents}"; do - #zsh pattern: matches lines like: #k# .............. - if [[ "$cline" == (#s)[[:space:]]#\#k\#[[:space:]]##(#b)(*)[[:space:]]#(#e) ]]; then - lastkeybind_desc="$match[*]" - num_lines_elapsed=0 - #zsh pattern: matches lines that set a keybinding using bind2map, bindkey or compdef -k - # ignores lines that are commentend out - # grabs first in '' or "" enclosed string with length between 1 and 6 characters - elif [[ "$cline" == [^#]#(bind2maps[[:space:]](*)-s|bindkey|compdef -k)[[:space:]](*)(#b)(\"((?)(#c1,6))\"|\'((?)(#c1,6))\')(#B)(*) ]]; then - #description previously found ? description not more than 2 lines away ? keybinding not empty ? - if [[ -n $lastkeybind_desc && $num_lines_elapsed -lt 2 && -n $match[1] ]]; then - #substitute keybinding string with something readable - k=${${${${${${${match[1]/\\e\^h/}/\\e\^\?/}/\\e\[5~/}/\\e\[6~/}//(\\e|\^\[)/}//\^/}/3~/} - #put keybinding in assoc array, possibly overwriting defaults or stuff found in earlier files - #Note that we are extracting the keybinding-string including the quotes (see Note at beginning) - help_zle_keybindings[${k}]=$lastkeybind_desc - fi - lastkeybind_desc="" - else - ((num_lines_elapsed++)) - fi - done - done - unset contents - #calculate length of keybinding column - local kstrlen=0 - for k (${(k)help_zle_keybindings[@]}) ((kstrlen < ${#k})) && kstrlen=${#k} - #convert the assoc array into preformated lines, which we are able to sort - for k v in ${(kv)help_zle_keybindings[@]}; do - #pad keybinding-string to kstrlen chars and remove outermost characters (i.e. the quotes) - help_zle_lines+=("${(r:kstrlen:)k[2,-2]}${v}") - done - #sort lines alphabetically - help_zle_lines=("${(i)help_zle_lines[@]}") - [[ -d ${HELP_ZLE_CACHE_FILE:h} ]] || mkdir -p "${HELP_ZLE_CACHE_FILE:h}" - echo "help_zle_lines=(${(q)help_zle_lines[@]})" >| $HELP_ZLE_CACHE_FILE - zcompile $HELP_ZLE_CACHE_FILE -} -typeset -g help_zle_sln -typeset -g -a help_zle_lines - -# Provides (partially autogenerated) help on keybindings and the zsh line editor -function help-zle () { - emulate -L zsh - unsetopt ksharrays #indexing starts at 1 - #help lines already generated ? no ? then do it - [[ ${+functions[help_zle_parse_keybindings]} -eq 1 ]] && {help_zle_parse_keybindings && unfunction help_zle_parse_keybindings} - #already displayed all lines ? go back to the start - [[ $help_zle_sln -gt ${#help_zle_lines} ]] && help_zle_sln=1 - local sln=$help_zle_sln - #note that help_zle_sln is a global var, meaning we remember the last page we viewed - help_zle_sln=$((help_zle_sln + HELP_LINES_PER_PAGE)) - zle -M "${(F)help_zle_lines[sln,help_zle_sln-1]}" -} -zle -N help-zle - -## complete word from currently visible Screen or Tmux buffer. -if check_com -c screen || check_com -c tmux; then - function _complete_screen_display () { - [[ "$TERM" != "screen" ]] && return 1 - - local TMPFILE=$(mktemp) - local -U -a _screen_display_wordlist - trap "rm -f $TMPFILE" EXIT - - # fill array with contents from screen hardcopy - if ((${+TMUX})); then - #works, but crashes tmux below version 1.4 - #luckily tmux -V option to ask for version, was also added in 1.4 - tmux -V &>/dev/null || return - tmux -q capture-pane \; save-buffer -b 0 $TMPFILE \; delete-buffer -b 0 - else - screen -X hardcopy $TMPFILE - # screen sucks, it dumps in latin1, apparently always. so recode it - # to system charset - check_com recode && recode latin1 $TMPFILE - fi - _screen_display_wordlist=( ${(QQ)$(<$TMPFILE)} ) - # remove PREFIX to be completed from that array - _screen_display_wordlist[${_screen_display_wordlist[(i)$PREFIX]}]="" - compadd -a _screen_display_wordlist - } - #m# k CTRL-x\,\,\,S Complete word from GNU screen buffer - bindkey -r "^xS" - compdef -k _complete_screen_display complete-word '^xS' -fi - -# Load a few more functions and tie them to widgets, so they can be bound: - -function zrcautozle () { - emulate -L zsh - local fnc=$1 - zrcautoload $fnc && zle -N $fnc -} - -function zrcgotwidget () { - (( ${+widgets[$1]} )) -} - -function zrcgotkeymap () { - [[ -n ${(M)keymaps:#$1} ]] -} - -zrcautozle insert-files -zrcautozle edit-command-line -zrcautozle insert-unicode-char -if zrcautoload history-search-end; then - zle -N history-beginning-search-backward-end history-search-end - zle -N history-beginning-search-forward-end history-search-end -fi -zle -C hist-complete complete-word _generic -zstyle ':completion:hist-complete:*' completer _history - -# The actual terminal setup hooks and bindkey-calls: - -# An array to note missing features to ease diagnosis in case of problems. -typeset -ga grml_missing_features - -function zrcbindkey () { - if (( ARGC )) && zrcgotwidget ${argv[-1]}; then - bindkey "$@" - fi -} - -function bind2maps () { - local i sequence widget - local -a maps - - while [[ "$1" != "--" ]]; do - maps+=( "$1" ) - shift - done - shift - - if [[ "$1" == "-s" ]]; then - shift - sequence="$1" - else - sequence="${key[$1]}" - fi - widget="$2" - - [[ -z "$sequence" ]] && return 1 - - for i in "${maps[@]}"; do - zrcbindkey -M "$i" "$sequence" "$widget" - done -} - -if (( ${+terminfo[smkx]} )) && (( ${+terminfo[rmkx]} )); then - function zle-smkx () { - emulate -L zsh - printf '%s' ${terminfo[smkx]} - } - function zle-rmkx () { - emulate -L zsh - printf '%s' ${terminfo[rmkx]} - } - function zle-line-init () { - zle-smkx - } - function zle-line-finish () { - zle-rmkx - } - zle -N zle-line-init - zle -N zle-line-finish -else - for i in {s,r}mkx; do - (( ${+terminfo[$i]} )) || grml_missing_features+=($i) - done - unset i -fi - -typeset -A key -key=( - Home "${terminfo[khome]}" - End "${terminfo[kend]}" - Insert "${terminfo[kich1]}" - Delete "${terminfo[kdch1]}" - Up "${terminfo[kcuu1]}" - Down "${terminfo[kcud1]}" - Left "${terminfo[kcub1]}" - Right "${terminfo[kcuf1]}" - PageUp "${terminfo[kpp]}" - PageDown "${terminfo[knp]}" - BackTab "${terminfo[kcbt]}" -) - -# Guidelines for adding key bindings: -# -# - Do not add hardcoded escape sequences, to enable non standard key -# combinations such as Ctrl-Meta-Left-Cursor. They are not easily portable. -# -# - Adding Ctrl characters, such as '^b' is okay; note that '^b' and '^B' are -# the same key. -# -# - All keys from the $key[] mapping are obviously okay. -# -# - Most terminals send "ESC x" when Meta-x is pressed. Thus, sequences like -# '\ex' are allowed in here as well. - -bind2maps emacs -- Home beginning-of-somewhere -bind2maps viins vicmd -- Home vi-beginning-of-line -bind2maps emacs -- End end-of-somewhere -bind2maps viins vicmd -- End vi-end-of-line -bind2maps emacs viins -- Insert overwrite-mode -bind2maps vicmd -- Insert vi-insert -bind2maps emacs -- Delete delete-char -bind2maps viins vicmd -- Delete vi-delete-char -bind2maps emacs viins vicmd -- Up up-line-or-search -bind2maps emacs viins vicmd -- Down down-line-or-search -bind2maps emacs -- Left backward-char -bind2maps viins vicmd -- Left vi-backward-char -bind2maps emacs -- Right forward-char -bind2maps viins vicmd -- Right vi-forward-char -#k# Perform abbreviation expansion -bind2maps emacs viins -- -s '^x.' zleiab -#k# Display list of abbreviations that would expand -bind2maps emacs viins -- -s '^xb' help-show-abk -#k# mkdir -p from string under cursor or marked area -bind2maps emacs viins -- -s '^xM' inplaceMkDirs -#k# display help for keybindings and ZLE -bind2maps emacs viins -- -s '^xz' help-zle -#k# Insert files and test globbing -bind2maps emacs viins -- -s "^xf" insert-files -#k# Edit the current line in \kbd{\$EDITOR} -bind2maps emacs viins -- -s '\ee' edit-command-line -#k# search history backward for entry beginning with typed text -bind2maps emacs viins -- -s '^xp' history-beginning-search-backward-end -#k# search history forward for entry beginning with typed text -bind2maps emacs viins -- -s '^xP' history-beginning-search-forward-end -#k# search history backward for entry beginning with typed text -bind2maps emacs viins -- PageUp history-beginning-search-backward-end -#k# search history forward for entry beginning with typed text -bind2maps emacs viins -- PageDown history-beginning-search-forward-end -bind2maps emacs viins -- -s "^x^h" commit-to-history -#k# Kill left-side word or everything up to next slash -bind2maps emacs viins -- -s '\ev' slash-backward-kill-word -#k# Kill left-side word or everything up to next slash -bind2maps emacs viins -- -s '\e^h' slash-backward-kill-word -#k# Kill left-side word or everything up to next slash -bind2maps emacs viins -- -s '\e^?' slash-backward-kill-word -# Do history expansion on space: -bind2maps emacs viins -- -s ' ' magic-space -#k# Trigger menu-complete -bind2maps emacs viins -- -s '\ei' menu-complete # menu completion via esc-i -#k# Insert a timestamp on the command line (yyyy-mm-dd) -bind2maps emacs viins -- -s '^xd' insert-datestamp -#k# Insert last typed word -bind2maps emacs viins -- -s "\em" insert-last-typed-word -#k# A smart shortcut for \kbd{fg} -bind2maps emacs viins -- -s '^z' grml-zsh-fg -#k# prepend the current command with "sudo" -bind2maps emacs viins -- -s "^os" sudo-command-line -#k# jump to after first word (for adding options) -bind2maps emacs viins -- -s '^x1' jump_after_first_word -#k# complete word from history with menu -bind2maps emacs viins -- -s "^x^x" hist-complete - -# insert unicode character -# usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an § -# See for example http://unicode.org/charts/ for unicode characters code -#k# Insert Unicode character -bind2maps emacs viins -- -s '^xi' insert-unicode-char - -# use the new *-pattern-* widgets for incremental history search -if zrcgotwidget history-incremental-pattern-search-backward; then - for seq wid in '^r' history-incremental-pattern-search-backward \ - '^s' history-incremental-pattern-search-forward - do - bind2maps emacs viins vicmd -- -s $seq $wid - done - builtin unset -v seq wid -fi - -if zrcgotkeymap menuselect; then - #m# k Shift-tab Perform backwards menu completion - bind2maps menuselect -- BackTab reverse-menu-complete - - #k# menu selection: pick item but stay in the menu - bind2maps menuselect -- -s '\e^M' accept-and-menu-complete - # also use + and INSERT since it's easier to press repeatedly - bind2maps menuselect -- -s '+' accept-and-menu-complete - bind2maps menuselect -- Insert accept-and-menu-complete - - # accept a completion and try to complete again by using menu - # completion; very useful with completing directories - # by using 'undo' one's got a simple file browser - bind2maps menuselect -- -s '^o' accept-and-infer-next-history -fi - -# Finally, here are still a few hardcoded escape sequences; Special sequences -# like Ctrl- etc do suck a fair bit, because they are not -# standardised and most of the time are not available in a terminals terminfo -# entry. -# -# While we do not encourage adding bindings like these, we will keep these for -# backward compatibility. - -## use Ctrl-left-arrow and Ctrl-right-arrow for jumping to word-beginnings on -## the command line. -# URxvt sequences: -bind2maps emacs viins vicmd -- -s '\eOc' forward-word -bind2maps emacs viins vicmd -- -s '\eOd' backward-word -# These are for xterm: -bind2maps emacs viins vicmd -- -s '\e[1;5C' forward-word -bind2maps emacs viins vicmd -- -s '\e[1;5D' backward-word -## the same for alt-left-arrow and alt-right-arrow -# URxvt again: -bind2maps emacs viins vicmd -- -s '\e\e[C' forward-word -bind2maps emacs viins vicmd -- -s '\e\e[D' backward-word -# Xterm again: -bind2maps emacs viins vicmd -- -s '^[[1;3C' forward-word -bind2maps emacs viins vicmd -- -s '^[[1;3D' backward-word -# Also try ESC Left/Right: -bind2maps emacs viins vicmd -- -s '\e'${key[Right]} forward-word -bind2maps emacs viins vicmd -- -s '\e'${key[Left]} backward-word - -# autoloading - -zrcautoload zmv -zrcautoload zed - -# we don't want to quote/espace URLs on our own... -# if autoload -U url-quote-magic ; then -# zle -N self-insert url-quote-magic -# zstyle ':url-quote-magic:*' url-metas '*?[]^()~#{}=' -# else -# print 'Notice: no url-quote-magic available :(' -# fi -alias url-quote='autoload -U url-quote-magic ; zle -N self-insert url-quote-magic' - -#m# k ESC-h Call \kbd{run-help} for the 1st word on the command line -alias run-help >&/dev/null && unalias run-help -for rh in run-help{,-git,-ip,-openssl,-p4,-sudo,-svk,-svn}; do - zrcautoload $rh -done; unset rh - -# command not found handling - -(( ${COMMAND_NOT_FOUND} == 1 )) && -function command_not_found_handler () { - emulate -L zsh - if [[ -x ${GRML_ZSH_CNF_HANDLER} ]] ; then - ${GRML_ZSH_CNF_HANDLER} $1 - fi - return 1 -} - -# history - -#v# -HISTFILE=${HISTFILE:-${ZDOTDIR:-${HOME}}/.zsh_history} -isgrmlcd && HISTSIZE=500 || HISTSIZE=${HISTSIZE:-5000} -isgrmlcd && SAVEHIST=1000 || SAVEHIST=${SAVEHIST:-10000} # useful for setopt append_history - -# dirstack handling - -DIRSTACKSIZE=${DIRSTACKSIZE:-20} -DIRSTACKFILE=${DIRSTACKFILE:-${ZDOTDIR:-${HOME}}/.zdirs} - -if zstyle -T ':grml:chpwd:dirstack' enable; then - typeset -gaU GRML_PERSISTENT_DIRSTACK - function grml_dirstack_filter () { - local -a exclude - local filter entry - if zstyle -s ':grml:chpwd:dirstack' filter filter; then - $filter $1 && return 0 - fi - if zstyle -a ':grml:chpwd:dirstack' exclude exclude; then - for entry in "${exclude[@]}"; do - [[ $1 == ${~entry} ]] && return 0 - done - fi - return 1 - } - - function chpwd () { - (( ZSH_SUBSHELL )) && return - (( $DIRSTACKSIZE <= 0 )) && return - [[ -z $DIRSTACKFILE ]] && return - grml_dirstack_filter $PWD && return - GRML_PERSISTENT_DIRSTACK=( - $PWD "${(@)GRML_PERSISTENT_DIRSTACK[1,$DIRSTACKSIZE]}" - ) - builtin print -l ${GRML_PERSISTENT_DIRSTACK} >! ${DIRSTACKFILE} - } - - if [[ -f ${DIRSTACKFILE} ]]; then - # Enabling NULL_GLOB via (N) weeds out any non-existing - # directories from the saved dir-stack file. - dirstack=( ${(f)"$(< $DIRSTACKFILE)"}(N) ) - # "cd -" won't work after login by just setting $OLDPWD, so - [[ -d $dirstack[1] ]] && cd -q $dirstack[1] && cd -q $OLDPWD - fi - - if zstyle -t ':grml:chpwd:dirstack' filter-on-load; then - for i in "${dirstack[@]}"; do - if ! grml_dirstack_filter "$i"; then - GRML_PERSISTENT_DIRSTACK=( - "${GRML_PERSISTENT_DIRSTACK[@]}" - $i - ) - fi - done - else - GRML_PERSISTENT_DIRSTACK=( "${dirstack[@]}" ) - fi -fi - -# directory based profiles - -if is433 ; then - -# chpwd_profiles(): Directory Profiles, Quickstart: -# -# In .zshrc.local: -# -# zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml -# zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian -# chpwd_profiles -# -# For details see the `grmlzshrc.5' manual page. -function chpwd_profiles () { - local profile context - local -i reexecute - - context=":chpwd:profiles:$PWD" - zstyle -s "$context" profile profile || profile='default' - zstyle -T "$context" re-execute && reexecute=1 || reexecute=0 - - if (( ${+parameters[CHPWD_PROFILE]} == 0 )); then - typeset -g CHPWD_PROFILE - local CHPWD_PROFILES_INIT=1 - (( ${+functions[chpwd_profiles_init]} )) && chpwd_profiles_init - elif [[ $profile != $CHPWD_PROFILE ]]; then - (( ${+functions[chpwd_leave_profile_$CHPWD_PROFILE]} )) \ - && chpwd_leave_profile_${CHPWD_PROFILE} - fi - if (( reexecute )) || [[ $profile != $CHPWD_PROFILE ]]; then - (( ${+functions[chpwd_profile_$profile]} )) && chpwd_profile_${profile} - fi - - CHPWD_PROFILE="${profile}" - return 0 -} - -chpwd_functions=( ${chpwd_functions} chpwd_profiles ) - -fi # is433 - -# Prompt setup for grml: - -# set colors for use in prompts (modern zshs allow for the use of %F{red}foo%f -# in prompts to get a red "foo" embedded, but it's good to keep these for -# backwards compatibility). -if is437; then - BLUE="%F{blue}" - RED="%F{red}" - GREEN="%F{green}" - CYAN="%F{cyan}" - MAGENTA="%F{magenta}" - YELLOW="%F{yellow}" - WHITE="%F{white}" - NO_COLOR="%f" -elif zrcautoload colors && colors 2>/dev/null ; then - BLUE="%{${fg[blue]}%}" - RED="%{${fg_bold[red]}%}" - GREEN="%{${fg[green]}%}" - CYAN="%{${fg[cyan]}%}" - MAGENTA="%{${fg[magenta]}%}" - YELLOW="%{${fg[yellow]}%}" - WHITE="%{${fg[white]}%}" - NO_COLOR="%{${reset_color}%}" -else - BLUE=$'%{\e[1;34m%}' - RED=$'%{\e[1;31m%}' - GREEN=$'%{\e[1;32m%}' - CYAN=$'%{\e[1;36m%}' - WHITE=$'%{\e[1;37m%}' - MAGENTA=$'%{\e[1;35m%}' - YELLOW=$'%{\e[1;33m%}' - NO_COLOR=$'%{\e[0m%}' -fi - -# First, the easy ones: PS2..4: - -# secondary prompt, printed when the shell needs more information to complete a -# command. -PS2='\`%_> ' -# selection prompt used within a select loop. -PS3='?# ' -# the execution trace prompt (setopt xtrace). default: '+%N:%i>' -PS4='+%N:%i:%_> ' - -# Some additional features to use with our prompt: -# -# - battery status -# - debian_chroot -# - vcs_info setup and version specific fixes - -# display battery status on right side of prompt using 'GRML_DISPLAY_BATTERY=1' in .zshrc.pre - -function battery () { -if [[ $GRML_DISPLAY_BATTERY -gt 0 ]] ; then - if islinux ; then - batterylinux - elif isopenbsd ; then - batteryopenbsd - elif isfreebsd ; then - batteryfreebsd - elif isdarwin ; then - batterydarwin - else - #not yet supported - GRML_DISPLAY_BATTERY=0 - fi -fi -} - -function batterylinux () { -GRML_BATTERY_LEVEL='' -local batteries bat capacity -batteries=( /sys/class/power_supply/BAT*(N) ) -if (( $#batteries > 0 )) ; then - for bat in $batteries ; do - if [[ -e $bat/capacity ]]; then - capacity=$(< $bat/capacity) - else - typeset -F energy_full=$(< $bat/energy_full) - typeset -F energy_now=$(< $bat/energy_now) - typeset -i capacity=$(( 100 * $energy_now / $energy_full)) - fi - case $(< $bat/status) in - Charging) - GRML_BATTERY_LEVEL+=" ^" - ;; - Discharging) - if (( capacity < 20 )) ; then - GRML_BATTERY_LEVEL+=" !v" - else - GRML_BATTERY_LEVEL+=" v" - fi - ;; - *) # Full, Unknown - GRML_BATTERY_LEVEL+=" =" - ;; - esac - GRML_BATTERY_LEVEL+="${capacity}%%" - done -fi -} - -function batteryopenbsd () { -GRML_BATTERY_LEVEL='' -local bat batfull batwarn batnow num -for num in 0 1 ; do - bat=$(sysctl -n hw.sensors.acpibat${num} 2>/dev/null) - if [[ -n $bat ]]; then - batfull=${"$(sysctl -n hw.sensors.acpibat${num}.amphour0)"%% *} - batwarn=${"$(sysctl -n hw.sensors.acpibat${num}.amphour1)"%% *} - batnow=${"$(sysctl -n hw.sensors.acpibat${num}.amphour3)"%% *} - case "$(sysctl -n hw.sensors.acpibat${num}.raw0)" in - *" discharging"*) - if (( batnow < batwarn )) ; then - GRML_BATTERY_LEVEL+=" !v" - else - GRML_BATTERY_LEVEL+=" v" - fi - ;; - *" charging"*) - GRML_BATTERY_LEVEL+=" ^" - ;; - *) - GRML_BATTERY_LEVEL+=" =" - ;; - esac - GRML_BATTERY_LEVEL+="${$(( 100 * batnow / batfull ))%%.*}%%" - fi -done -} - -function batteryfreebsd () { -GRML_BATTERY_LEVEL='' -local num -local -A table -for num in 0 1 ; do - table=( ${=${${${${${(M)${(f)"$(acpiconf -i $num 2>&1)"}:#(State|Remaining capacity):*}%%( ##|%)}//:[ $'\t']##/@}// /-}//@/ }} ) - if [[ -n $table ]] && [[ $table[State] != "not-present" ]] ; then - case $table[State] in - *discharging*) - if (( $table[Remaining-capacity] < 20 )) ; then - GRML_BATTERY_LEVEL+=" !v" - else - GRML_BATTERY_LEVEL+=" v" - fi - ;; - *charging*) - GRML_BATTERY_LEVEL+=" ^" - ;; - *) - GRML_BATTERY_LEVEL+=" =" - ;; - esac - GRML_BATTERY_LEVEL+="$table[Remaining-capacity]%%" - fi -done -} - -function batterydarwin () { -GRML_BATTERY_LEVEL='' -local -a table -table=( ${$(pmset -g ps)[(w)7,8]%%(\%|);} ) -if [[ -n $table[2] ]] ; then - case $table[2] in - charging) - GRML_BATTERY_LEVEL+=" ^" - ;; - discharging) - if (( $table[1] < 20 )) ; then - GRML_BATTERY_LEVEL+=" !v" - else - GRML_BATTERY_LEVEL+=" v" - fi - ;; - *) - GRML_BATTERY_LEVEL+=" =" - ;; - esac - GRML_BATTERY_LEVEL+="$table[1]%%" -fi -} - -# set variable debian_chroot if running in a chroot with /etc/debian_chroot -if [[ -z "$debian_chroot" ]] && [[ -r /etc/debian_chroot ]] ; then - debian_chroot=$( ]] ; then - function VCS_INFO_realpath () { - setopt localoptions NO_shwordsplit chaselinks - ( builtin cd -q $1 2> /dev/null && pwd; ) - } - fi - - zstyle ':vcs_info:*' max-exports 2 - - if [[ -o restricted ]]; then - zstyle ':vcs_info:*' enable NONE - fi -fi - -typeset -A grml_vcs_coloured_formats -typeset -A grml_vcs_plain_formats - -grml_vcs_plain_formats=( - format "(%s%)-[%b] " "zsh: %r" - actionformat "(%s%)-[%b|%a] " "zsh: %r" - rev-branchformat "%b:%r" -) - -grml_vcs_coloured_formats=( - format "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${MAGENTA}]${NO_COLOR} " - actionformat "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${YELLOW}|${RED}%a${MAGENTA}]${NO_COLOR} " - rev-branchformat "%b${RED}:${YELLOW}%r" -) - -typeset GRML_VCS_COLOUR_MODE=xxx - -function grml_vcs_info_toggle_colour () { - emulate -L zsh - if [[ $GRML_VCS_COLOUR_MODE == plain ]]; then - grml_vcs_info_set_formats coloured - else - grml_vcs_info_set_formats plain - fi - return 0 -} - -function grml_vcs_info_set_formats () { - emulate -L zsh - #setopt localoptions xtrace - local mode=$1 AF F BF - if [[ $mode == coloured ]]; then - AF=${grml_vcs_coloured_formats[actionformat]} - F=${grml_vcs_coloured_formats[format]} - BF=${grml_vcs_coloured_formats[rev-branchformat]} - GRML_VCS_COLOUR_MODE=coloured - else - AF=${grml_vcs_plain_formats[actionformat]} - F=${grml_vcs_plain_formats[format]} - BF=${grml_vcs_plain_formats[rev-branchformat]} - GRML_VCS_COLOUR_MODE=plain - fi - - zstyle ':vcs_info:*' actionformats "$AF" "zsh: %r" - zstyle ':vcs_info:*' formats "$F" "zsh: %r" - zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat "$BF" - return 0 -} - -# Change vcs_info formats for the grml prompt. The 2nd format sets up -# $vcs_info_msg_1_ to contain "zsh: repo-name" used to set our screen title. -if [[ "$TERM" == dumb ]] ; then - grml_vcs_info_set_formats plain -else - grml_vcs_info_set_formats coloured -fi - -# Now for the fun part: The grml prompt themes in `promptsys' mode of operation - -# This actually defines three prompts: -# -# - grml -# - grml-large -# - grml-chroot -# -# They all share the same code and only differ with respect to which items they -# contain. The main source of documentation is the `prompt_grml_help' function -# below, which gets called when the user does this: prompt -h grml - -function prompt_grml_help () { - <<__EOF0__ - prompt grml - - This is the prompt as used by the grml-live system . It is - a rather simple one-line prompt, that by default looks something like this: - - @ [ ]% - - The prompt itself integrates with zsh's prompt themes system (as you are - witnessing right now) and is configurable to a certain degree. In - particular, these aspects are customisable: - - - The items used in the prompt (e.g. you can remove \`user' from - the list of activated items, which will cause the user name to - be omitted from the prompt string). - - - The attributes used with the items are customisable via strings - used before and after the actual item. - - The available items are: at, battery, change-root, date, grml-chroot, - history, host, jobs, newline, path, percent, rc, rc-always, sad-smiley, - shell-level, time, user, vcs - - The actual configuration is done via zsh's \`zstyle' mechanism. The - context, that is used while looking up styles is: - - ':prompt:grml::' - - Here is either \`left' or \`right', signifying whether the - style should affect the left or the right prompt. is either - \`setup' or 'items:', where \`' is one of the available items. - - The styles: - - - use-rprompt (boolean): If \`true' (the default), print a sad smiley - in $RPROMPT if the last command a returned non-successful error code. - (This in only valid if is "right"; ignored otherwise) - - - items (list): The list of items used in the prompt. If \`vcs' is - present in the list, the theme's code invokes \`vcs_info' - accordingly. Default (left): rc change-root user at host path vcs - percent; Default (right): sad-smiley - - - strip-sensitive-characters (boolean): If the \`prompt_subst' option - is active in zsh, the shell performs lots of expansions on prompt - variable strings, including command substitution. So if you don't - control where some of your prompt strings is coming from, this is - an exploitable weakness. Grml's zsh setup does not set this option - and it is off in the shell in zsh-mode by default. If it *is* turned - on however, this style becomes active, and there are two flavours of - it: On per default is a global variant in the '*:setup' context. This - strips characters after the whole prompt string was constructed. There - is a second variant in the '*:items:', that is off by default. - It allows fine grained control over which items' data is stripped. - The characters that are stripped are: \$ and \`. - - Available styles in 'items:' are: pre, post. These are strings that - are inserted before (pre) and after (post) the item in question. Thus, the - following would cause the user name to be printed in red instead of the - default blue: - - zstyle ':prompt:grml:*:items:user' pre '%F{red}' - - Note, that the \`post' style may remain at its default value, because its - default value is '%f', which turns the foreground text attribute off (which - is exactly, what is still required with the new \`pre' value). -__EOF0__ -} - -function prompt_grml-chroot_help () { - <<__EOF0__ - prompt grml-chroot - - This is a variation of the grml prompt, see: prompt -h grml - - The main difference is the default value of the \`items' style. The rest - behaves exactly the same. Here are the defaults for \`grml-chroot': - - - left: grml-chroot user at host path percent - - right: (empty list) -__EOF0__ -} - -function prompt_grml-large_help () { - <<__EOF0__ - prompt grml-large - - This is a variation of the grml prompt, see: prompt -h grml - - The main difference is the default value of the \`items' style. In - particular, this theme uses _two_ lines instead of one with the plain - \`grml' theme. The rest behaves exactly the same. Here are the defaults - for \`grml-large': - - - left: rc jobs history shell-level change-root time date newline user - at host path vcs percent - - right: sad-smiley -__EOF0__ -} - -function grml_prompt_setup () { - emulate -L zsh - autoload -Uz vcs_info - # The following autoload is disabled for now, since this setup includes a - # static version of the ‘add-zsh-hook’ function above. It needs to be - # re-enabled as soon as that static definition is removed again. - #autoload -Uz add-zsh-hook - add-zsh-hook precmd prompt_$1_precmd -} - -function prompt_grml_setup () { - grml_prompt_setup grml -} - -function prompt_grml-chroot_setup () { - grml_prompt_setup grml-chroot -} - -function prompt_grml-large_setup () { - grml_prompt_setup grml-large -} - -# These maps define default tokens and pre-/post-decoration for items to be -# used within the themes. All defaults may be customised in a context sensitive -# matter by using zsh's `zstyle' mechanism. -typeset -gA grml_prompt_pre_default \ - grml_prompt_post_default \ - grml_prompt_token_default \ - grml_prompt_token_function - -grml_prompt_pre_default=( - at '' - battery ' ' - change-root '' - date '%F{blue}' - grml-chroot '%F{red}' - history '%F{green}' - host '' - jobs '%F{cyan}' - newline '' - path '%B' - percent '' - rc '%B%F{red}' - rc-always '' - sad-smiley '' - shell-level '%F{red}' - time '%F{blue}' - user '%B%F{blue}' - vcs '' -) - -grml_prompt_post_default=( - at '' - battery '' - change-root '' - date '%f' - grml-chroot '%f ' - history '%f' - host '' - jobs '%f' - newline '' - path '%b' - percent '' - rc '%f%b' - rc-always '' - sad-smiley '' - shell-level '%f' - time '%f' - user '%f%b' - vcs '' -) - -grml_prompt_token_default=( - at '@' - battery 'GRML_BATTERY_LEVEL' - change-root 'debian_chroot' - date '%D{%Y-%m-%d}' - grml-chroot 'GRML_CHROOT' - history '{history#%!} ' - host '%m ' - jobs '[%j running job(s)] ' - newline $'\n' - path '%40<..<%~%<< ' - percent '%# ' - rc '%(?..%? )' - rc-always '%?' - sad-smiley '%(?..:()' - shell-level '%(3L.+ .)' - time '%D{%H:%M:%S} ' - user '%n' - vcs '0' -) - -function grml_theme_has_token () { - if (( ARGC != 1 )); then - printf 'usage: grml_theme_has_token \n' - return 1 - fi - (( ${+grml_prompt_token_default[$1]} )) -} - -function GRML_theme_add_token_usage () { - <<__EOF0__ - Usage: grml_theme_add_token [-f|-i] [
 ]
-
-     is the name for the newly added token. If the \`-f' or \`-i' options
-    are used,  is the name of the function (see below for
-    details). Otherwise it is the literal token string to be used. 
 and
-     are optional.
-
-  Options:
-
-    -f    Use a function named \`' each time the token
-                    is to be expanded.
-
-    -i    Use a function named \`' to initialise the
-                    value of the token _once_ at runtime.
-
-    The functions are called with one argument: the token's new name. The
-    return value is expected in the \$REPLY parameter. The use of these
-    options is mutually exclusive.
-
-    There is a utility function \`grml_theme_has_token', which you can use
-    to test if a token exists before trying to add it. This can be a guard
-    for situations in which a \`grml_theme_add_token' call may happen more
-    than once.
-
-  Example:
-
-    To add a new token \`day' that expands to the current weekday in the
-    current locale in green foreground colour, use this:
-
-      grml_theme_add_token day '%D{%A}' '%F{green}' '%f'
-
-    Another example would be support for \$VIRTUAL_ENV:
-
-      function virtual_env_prompt () {
-        REPLY=\${VIRTUAL_ENV+\${VIRTUAL_ENV:t} }
-      }
-      grml_theme_add_token virtual-env -f virtual_env_prompt
-
-    After that, you will be able to use a changed \`items' style to
-    assemble your prompt.
-__EOF0__
-}
-
-function grml_theme_add_token () {
-    emulate -L zsh
-    local name token pre post
-    local -i init funcall
-
-    if (( ARGC == 0 )); then
-        GRML_theme_add_token_usage
-        return 0
-    fi
-
-    init=0
-    funcall=0
-    pre=''
-    post=''
-    name=$1
-    shift
-    if [[ $1 == '-f' ]]; then
-        funcall=1
-        shift
-    elif [[ $1 == '-i' ]]; then
-        init=1
-        shift
-    fi
-
-    if (( ARGC == 0 )); then
-        printf '
-grml_theme_add_token: No token-string/function-name provided!\n\n'
-        GRML_theme_add_token_usage
-        return 1
-    fi
-    token=$1
-    shift
-    if (( ARGC != 0 && ARGC != 2 )); then
-        printf '
-grml_theme_add_token: 
 and  need to by specified _both_!\n\n'
-        GRML_theme_add_token_usage
-        return 1
-    fi
-    if (( ARGC )); then
-        pre=$1
-        post=$2
-        shift 2
-    fi
-
-    if grml_theme_has_token $name; then
-        printf '
-grml_theme_add_token: Token `%s'\'' exists! Giving up!\n\n' $name
-        GRML_theme_add_token_usage
-        return 2
-    fi
-    if (( init )); then
-        $token $name
-        token=$REPLY
-    fi
-    grml_prompt_pre_default[$name]=$pre
-    grml_prompt_post_default[$name]=$post
-    if (( funcall )); then
-        grml_prompt_token_function[$name]=$token
-        grml_prompt_token_default[$name]=23
-    else
-        grml_prompt_token_default[$name]=$token
-    fi
-}
-
-function grml_wrap_reply () {
-    emulate -L zsh
-    local target="$1"
-    local new="$2"
-    local left="$3"
-    local right="$4"
-
-    if (( ${+parameters[$new]} )); then
-        REPLY="${left}${(P)new}${right}"
-    else
-        REPLY=''
-    fi
-}
-
-function grml_prompt_addto () {
-    emulate -L zsh
-    local target="$1"
-    local lr it apre apost new v REPLY
-    local -a items
-    shift
-
-    [[ $target == PS1 ]] && lr=left || lr=right
-    zstyle -a ":prompt:${grmltheme}:${lr}:setup" items items || items=( "$@" )
-    typeset -g "${target}="
-    for it in "${items[@]}"; do
-        zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" pre apre \
-            || apre=${grml_prompt_pre_default[$it]}
-        zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" post apost \
-            || apost=${grml_prompt_post_default[$it]}
-        zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" token new \
-            || new=${grml_prompt_token_default[$it]}
-        if (( ${+grml_prompt_token_function[$it]} )); then
-            ${grml_prompt_token_function[$it]} $it
-        else
-            case $it in
-            battery)
-                grml_wrap_reply $target $new '' ''
-                ;;
-            change-root)
-                grml_wrap_reply $target $new '(' ')'
-                ;;
-            grml-chroot)
-                if [[ -n ${(P)new} ]]; then
-                    REPLY="$CHROOT"
-                else
-                    REPLY=''
-                fi
-                ;;
-            vcs)
-                v="vcs_info_msg_${new}_"
-                if (( ! vcscalled )); then
-                    vcs_info
-                    vcscalled=1
-                fi
-                if (( ${+parameters[$v]} )) && [[ -n "${(P)v}" ]]; then
-                    REPLY="${(P)v}"
-                else
-                    REPLY=''
-                fi
-                ;;
-            *) REPLY="$new" ;;
-            esac
-        fi
-        # Strip volatile characters per item. This is off by default. See the
-        # global stripping code a few lines below for details.
-        if [[ -o prompt_subst ]] && zstyle -t ":prompt:${grmltheme}:${lr}:items:$it" \
-                                           strip-sensitive-characters
-        then
-            REPLY="${REPLY//[$\`]/}"
-        fi
-        typeset -g "${target}=${(P)target}${apre}${REPLY}${apost}"
-    done
-
-    # Per default, strip volatile characters (in the prompt_subst case)
-    # globally. If the option is off, the style has no effect. For more
-    # control, this can be turned off and stripping can be configured on a
-    # per-item basis (see above).
-    if [[ -o prompt_subst ]] && zstyle -T ":prompt:${grmltheme}:${lr}:setup" \
-                                       strip-sensitive-characters
-    then
-        typeset -g "${target}=${${(P)target}//[$\`]/}"
-    fi
-}
-
-function prompt_grml_precmd () {
-    emulate -L zsh
-    local grmltheme=grml
-    local -a left_items right_items
-    left_items=(rc change-root user at host path vcs percent)
-    right_items=(sad-smiley)
-
-    prompt_grml_precmd_worker
-}
-
-function prompt_grml-chroot_precmd () {
-    emulate -L zsh
-    local grmltheme=grml-chroot
-    local -a left_items right_items
-    left_items=(grml-chroot user at host path percent)
-    right_items=()
-
-    prompt_grml_precmd_worker
-}
-
-function prompt_grml-large_precmd () {
-    emulate -L zsh
-    local grmltheme=grml-large
-    local -a left_items right_items
-    left_items=(rc jobs history shell-level change-root time date newline
-                user at host path vcs percent)
-    right_items=(sad-smiley)
-
-    prompt_grml_precmd_worker
-}
-
-function prompt_grml_precmd_worker () {
-    emulate -L zsh
-    local -i vcscalled=0
-
-    grml_prompt_addto PS1 "${left_items[@]}"
-    if zstyle -T ":prompt:${grmltheme}:right:setup" use-rprompt; then
-        grml_prompt_addto RPS1 "${right_items[@]}"
-    fi
-}
-
-function grml_prompt_fallback () {
-    setopt prompt_subst
-    local p0 p1
-
-    p0="${RED}%(?..%? )${WHITE}${debian_chroot:+($debian_chroot)}"
-    p1="${BLUE}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "'${vcs_info_msg_0_}'"%# "
-    if (( EUID == 0 )); then
-        PROMPT="${BLUE}${p0}${RED}${p1}"
-    else
-        PROMPT="${RED}${p0}${BLUE}${p1}"
-    fi
-}
-
-if zrcautoload promptinit && promptinit 2>/dev/null ; then
-    # Since we define the required functions in here and not in files in
-    # $fpath, we need to stick the theme's name into `$prompt_themes'
-    # ourselves, since promptinit does not pick them up otherwise.
-    prompt_themes+=( grml grml-chroot grml-large )
-    # Also, keep the array sorted...
-    prompt_themes=( "${(@on)prompt_themes}" )
-else
-    print 'Notice: no promptinit available :('
-    grml_prompt_fallback
-    function precmd () { (( ${+functions[vcs_info]} )) && vcs_info; }
-fi
-
-if is437; then
-    # The prompt themes use modern features of zsh, that require at least
-    # version 4.3.7 of the shell. Use the fallback otherwise.
-    if [[ $GRML_DISPLAY_BATTERY -gt 0 ]]; then
-        zstyle ':prompt:grml:right:setup' items sad-smiley battery
-        add-zsh-hook precmd battery
-    fi
-    if [[ "$TERM" == dumb ]] ; then
-        zstyle ":prompt:grml(|-large|-chroot):*:items:grml-chroot" pre ''
-        zstyle ":prompt:grml(|-large|-chroot):*:items:grml-chroot" post ' '
-        for i in rc user path jobs history date time shell-level; do
-            zstyle ":prompt:grml(|-large|-chroot):*:items:$i" pre ''
-            zstyle ":prompt:grml(|-large|-chroot):*:items:$i" post ''
-        done
-        unset i
-        zstyle ':prompt:grml(|-large|-chroot):right:setup' use-rprompt false
-    elif (( EUID == 0 )); then
-        zstyle ':prompt:grml(|-large|-chroot):*:items:user' pre '%B%F{red}'
-    fi
-
-    # Finally enable one of the prompts.
-    if [[ -n $GRML_CHROOT ]]; then
-        prompt grml-chroot
-    elif [[ $GRMLPROMPT -gt 0 ]]; then
-        prompt grml-large
-    else
-        prompt grml
-    fi
-else
-    grml_prompt_fallback
-    function precmd () { (( ${+functions[vcs_info]} )) && vcs_info; }
-fi
-
-# Terminal-title wizardry
-
-function ESC_print () {
-    info_print $'\ek' $'\e\\' "$@"
-}
-function set_title () {
-    info_print  $'\e]0;' $'\a' "$@"
-}
-
-function info_print () {
-    local esc_begin esc_end
-    esc_begin="$1"
-    esc_end="$2"
-    shift 2
-    printf '%s' ${esc_begin}
-    printf '%s' "$*"
-    printf '%s' "${esc_end}"
-}
-
-function grml_reset_screen_title () {
-    # adjust title of xterm
-    # see http://www.faqs.org/docs/Linux-mini/Xterm-Title.html
-    [[ ${NOTITLE:-} -gt 0 ]] && return 0
-    case $TERM in
-        (xterm*|rxvt*)
-            set_title ${(%):-"%n@%m: %~"}
-            ;;
-    esac
-}
-
-function grml_vcs_to_screen_title () {
-    if [[ $TERM == screen* ]] ; then
-        if [[ -n ${vcs_info_msg_1_} ]] ; then
-            ESC_print ${vcs_info_msg_1_}
-        else
-            ESC_print "zsh"
-        fi
-    fi
-}
-
-function grml_maintain_name () {
-    # set hostname if not running on host with name 'grml'
-    if [[ -n "$HOSTNAME" ]] && [[ "$HOSTNAME" != $(hostname) ]] ; then
-       NAME="@$HOSTNAME"
-    fi
-}
-
-function grml_cmd_to_screen_title () {
-    # get the name of the program currently running and hostname of local
-    # machine set screen window title if running in a screen
-    if [[ "$TERM" == screen* ]] ; then
-        local CMD="${1[(wr)^(*=*|sudo|ssh|-*)]}$NAME"
-        ESC_print ${CMD}
-    fi
-}
-
-function grml_control_xterm_title () {
-    case $TERM in
-        (xterm*|rxvt*)
-            set_title "${(%):-"%n@%m:"}" "$1"
-            ;;
-    esac
-}
-
-# The following autoload is disabled for now, since this setup includes a
-# static version of the ‘add-zsh-hook’ function above. It needs to be
-# re-enabled as soon as that static definition is removed again.
-#zrcautoload add-zsh-hook || add-zsh-hook () { :; }
-if [[ $NOPRECMD -eq 0 ]]; then
-    add-zsh-hook precmd grml_reset_screen_title
-    add-zsh-hook precmd grml_vcs_to_screen_title
-    add-zsh-hook preexec grml_maintain_name
-    add-zsh-hook preexec grml_cmd_to_screen_title
-    if [[ $NOTITLE -eq 0 ]]; then
-        add-zsh-hook preexec grml_control_xterm_title
-    fi
-fi
-
-# 'hash' some often used directories
-#d# start
-hash -d deb=/var/cache/apt/archives
-hash -d doc=/usr/share/doc
-hash -d linux=/lib/modules/$(command uname -r)/build/
-hash -d log=/var/log
-hash -d slog=/var/log/syslog
-hash -d src=/usr/src
-hash -d www=/var/www
-#d# end
-
-# some aliases
-if check_com -c screen ; then
-    if [[ $UID -eq 0 ]] ; then
-        if [[ -r /etc/grml/screenrc ]]; then
-            alias screen='screen -c /etc/grml/screenrc'
-        fi
-    elif [[ ! -r $HOME/.screenrc ]] ; then
-        if [[ -r /etc/grml/screenrc_grml ]]; then
-            alias screen='screen -c /etc/grml/screenrc_grml'
-        else
-            if [[ -r /etc/grml/screenrc ]]; then
-                alias screen='screen -c /etc/grml/screenrc'
-            fi
-        fi
-    fi
-fi
-
-# do we have GNU ls with color-support?
-if [[ "$TERM" != dumb ]]; then
-    #a1# List files with colors (\kbd{ls \ldots})
-    alias ls="command ls ${ls_options:+${ls_options[*]}}"
-    #a1# List all files, with colors (\kbd{ls -la \ldots})
-    alias la="command ls -la ${ls_options:+${ls_options[*]}}"
-    #a1# List files with long colored list, without dotfiles (\kbd{ls -l \ldots})
-    alias ll="command ls -l ${ls_options:+${ls_options[*]}}"
-    #a1# List files with long colored list, human readable sizes (\kbd{ls -hAl \ldots})
-    alias lh="command ls -hAl ${ls_options:+${ls_options[*]}}"
-    #a1# List files with long colored list, append qualifier to filenames (\kbd{ls -l \ldots})\\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...)
-    alias l="command ls -l ${ls_options:+${ls_options[*]}}"
-else
-    alias la='command ls -la'
-    alias ll='command ls -l'
-    alias lh='command ls -hAl'
-    alias l='command ls -l'
-fi
-
-if [[ -r /proc/mdstat ]]; then
-    alias mdstat='cat /proc/mdstat'
-fi
-
-alias ...='cd ../../'
-
-# generate alias named "$KERNELVERSION-reboot" so you can use boot with kexec:
-if [[ -x /sbin/kexec ]] && [[ -r /proc/cmdline ]] ; then
-    alias "$(uname -r)-reboot"="kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)""
-fi
-
-# see http://www.cl.cam.ac.uk/~mgk25/unicode.html#term for details
-alias term2iso="echo 'Setting terminal to iso mode' ; print -n '\e%@'"
-alias term2utf="echo 'Setting terminal to utf-8 mode'; print -n '\e%G'"
-
-# make sure it is not assigned yet
-[[ -n ${aliases[utf2iso]} ]] && unalias utf2iso
-function utf2iso () {
-    if isutfenv ; then
-        local ENV
-        for ENV in $(env | command grep -i '.utf') ; do
-            eval export "$(echo $ENV | sed 's/UTF-8/iso885915/ ; s/utf8/iso885915/')"
-        done
-    fi
-}
-
-# make sure it is not assigned yet
-[[ -n ${aliases[iso2utf]} ]] && unalias iso2utf
-function iso2utf () {
-    if ! isutfenv ; then
-        local ENV
-        for ENV in $(env | command grep -i '\.iso') ; do
-            eval export "$(echo $ENV | sed 's/iso.*/UTF-8/ ; s/ISO.*/UTF-8/')"
-        done
-    fi
-}
-
-# especially for roadwarriors using GNU screen and ssh:
-if ! check_com asc &>/dev/null ; then
-  function asc () { autossh -t "$@" 'screen -RdU' }
-  compdef asc=ssh
-fi
-
-#f1# Hints for the use of zsh on grml
-function zsh-help () {
-    print "$bg[white]$fg[black]
-zsh-help - hints for use of zsh on grml
-=======================================$reset_color"
-
-    print '
-Main configuration of zsh happens in /etc/zsh/zshrc.
-That file is part of the package grml-etc-core, if you want to
-use them on a non-grml-system just get the tar.gz from
-http://deb.grml.org/ or (preferably) get it from the git repository:
-
-  http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc
-
-This version of grml'\''s zsh setup does not use skel/.zshrc anymore.
-The file is still there, but it is empty for backwards compatibility.
-
-For your own changes use these two files:
-    $HOME/.zshrc.pre
-    $HOME/.zshrc.local
-
-The former is sourced very early in our zshrc, the latter is sourced
-very lately.
-
-System wide configuration without touching configuration files of grml
-can take place in /etc/zsh/zshrc.local.
-
-For information regarding zsh start at http://grml.org/zsh/
-
-Take a look at grml'\''s zsh refcard:
-% xpdf =(zcat /usr/share/doc/grml-docs/zsh/grml-zsh-refcard.pdf.gz)
-
-Check out the main zsh refcard:
-% '$BROWSER' http://www.bash2zsh.com/zsh_refcard/refcard.pdf
-
-And of course visit the zsh-lovers:
-% man zsh-lovers
-
-You can adjust some options through environment variables when
-invoking zsh without having to edit configuration files.
-Basically meant for bash users who are not used to the power of
-the zsh yet. :)
-
-  "NOCOR=1    zsh" => deactivate automatic correction
-  "NOMENU=1   zsh" => do not use auto menu completion
-                      (note: use ctrl-d for completion instead!)
-  "NOPRECMD=1 zsh" => disable the precmd + preexec commands (set GNU screen title)
-  "NOTITLE=1  zsh" => disable setting the title of xterms without disabling
-                      preexec() and precmd() completely
-  "GRML_DISPLAY_BATTERY=1  zsh"
-                   => activate battery status on right side of prompt (WIP)
-  "COMMAND_NOT_FOUND=1 zsh"
-                   => Enable a handler if an external command was not found
-                      The command called in the handler can be altered by setting
-                      the GRML_ZSH_CNF_HANDLER variable, the default is:
-                      "/usr/share/command-not-found/command-not-found"
-
-A value greater than 0 is enables a feature; a value equal to zero
-disables it. If you like one or the other of these settings, you can
-add them to ~/.zshrc.pre to ensure they are set when sourcing grml'\''s
-zshrc.'
-
-    print "
-$bg[white]$fg[black]
-Please report wishes + bugs to the grml-team: http://grml.org/bugs/
-Enjoy your grml system with the zsh!$reset_color"
-}
-
-# debian stuff
-if [[ -r /etc/debian_version ]] ; then
-    if [[ -z "$GRML_NO_APT_ALIASES" ]]; then
-        #a3# Execute \kbd{apt-cache search}
-        alias acs='apt-cache search'
-        #a3# Execute \kbd{apt-cache show}
-        alias acsh='apt-cache show'
-        #a3# Execute \kbd{apt-cache policy}
-        alias acp='apt-cache policy'
-        if check_com -c apt ; then
-          #a3# Execute \kbd{apt dist-upgrade}
-          salias adg="apt dist-upgrade"
-          #a3# Execute \kbd{apt upgrade}
-          salias ag="apt upgrade"
-          #a3# Execute \kbd{apt install}
-          salias agi="apt install"
-          #a3# Execute \kbd{apt-get update}
-          salias au="apt update"
-        else
-          salias adg="apt-get dist-upgrade"
-          salias ag="apt-get upgrade"
-          salias agi="apt-get install"
-          salias au="apt-get update"
-        fi
-        #a3# Execute \kbd{aptitude install}
-        salias ati="aptitude install"
-        #a3# Execute \kbd{aptitude update ; aptitude safe-upgrade}
-        salias -a up="aptitude update ; aptitude safe-upgrade"
-        #a3# Execute \kbd{dpkg-buildpackage}
-        alias dbp='dpkg-buildpackage'
-        #a3# Execute \kbd{grep-excuses}
-        alias ge='grep-excuses'
-    fi
-
-    # get a root shell as normal user in live-cd mode:
-    if isgrmlcd && [[ $UID -ne 0 ]] ; then
-       alias su="sudo su"
-    fi
-
-fi
-
-# use /var/log/syslog iff present, fallback to journalctl otherwise
-if [ -e /var/log/syslog ] ; then
-  #a1# Take a look at the syslog: \kbd{\$PAGER /var/log/syslog || journalctl}
-  salias llog="$PAGER /var/log/syslog"     # take a look at the syslog
-  #a1# Take a look at the syslog: \kbd{tail -f /var/log/syslog || journalctl}
-  salias tlog="tail -f /var/log/syslog"    # follow the syslog
-elif check_com -c journalctl ; then
-  salias llog="journalctl"
-  salias tlog="journalctl -f"
-fi
-
-# sort installed Debian-packages by size
-if check_com -c dpkg-query ; then
-    #a3# List installed Debian-packages sorted by size
-    alias debs-by-size="dpkg-query -Wf 'x \${Installed-Size} \${Package} \${Status}\n' | sed -ne '/^x  /d' -e '/^x \(.*\) install ok installed$/s//\1/p' | sort -nr"
-fi
-
-# if cdrecord is a symlink (to wodim) or isn't present at all warn:
-if [[ -L /usr/bin/cdrecord ]] || ! check_com -c cdrecord; then
-    if check_com -c wodim; then
-        function cdrecord () {
-            <<__EOF0__
-cdrecord is not provided under its original name by Debian anymore.
-See #377109 in the BTS of Debian for more details.
-
-Please use the wodim binary instead
-__EOF0__
-            return 1
-        }
-    fi
-fi
-
-if isgrmlcd; then
-    # No core dumps: important for a live-cd-system
-    limit -s core 0
-fi
-
-# grmlstuff
-function grmlstuff () {
-# people should use 'grml-x'!
-    if check_com -c 915resolution; then
-        function 855resolution () {
-            echo "Please use 915resolution as resolution modifying tool for Intel \
-graphic chipset."
-            return -1
-        }
-    fi
-
-    #a1# Output version of running grml
-    alias grml-version='cat /etc/grml_version'
-
-    if check_com -c grml-debootstrap ; then
-        function debian2hd () {
-            echo "Installing debian to harddisk is possible by using grml-debootstrap."
-            return 1
-        }
-    fi
-}
-
-# now run the functions
-isgrml && checkhome
-is4    && isgrml    && grmlstuff
-is4    && grmlcomp
-
-# keephack
-is4 && xsource "/etc/zsh/keephack"
-
-# wonderful idea of using "e" glob qualifier by Peter Stephenson
-# You use it as follows:
-# $ NTREF=/reference/file
-# $ ls -l *(e:nt:)
-# This lists all the files in the current directory newer than the reference file.
-# You can also specify the reference file inline; note quotes:
-# $ ls -l *(e:'nt ~/.zshenv':)
-is4 && function nt () {
-    if [[ -n $1 ]] ; then
-        local NTREF=${~1}
-    fi
-    [[ $REPLY -nt $NTREF ]]
-}
-
-# shell functions
-
-#f1# Reload an autoloadable function
-function freload () { while (( $# )); do; unfunction $1; autoload -U $1; shift; done }
-compdef _functions freload
-
-#
-# Usage:
-#
-#      e.g.:   a -> b -> c -> d  ....
-#
-#      sll a
-#
-#
-#      if parameter is given with leading '=', lookup $PATH for parameter and resolve that
-#
-#      sll =java
-#
-#      Note: limit for recursive symlinks on linux:
-#            http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/fs/namei.c?id=refs/heads/master#l808
-#            This limits recursive symlink follows to 8,
-#            while limiting consecutive symlinks to 40.
-#
-#      When resolving and displaying information about symlinks, no check is made
-#      that the displayed information does make any sense on your OS.
-#      We leave that decission to the user.
-#
-#      The zstat module is used to detect symlink loops. zstat is available since zsh4.
-#      With an older zsh you will need to abort with  in that case.
-#      When a symlink loop is detected, a warning ist printed and further processing is stopped.
-#
-#      Module zstat is loaded by default in grml zshrc, no extra action needed for that.
-#
-#      Known bugs:
-#      If you happen to come across a symlink that points to a destination on another partition
-#      with the same inode number, that will be marked as symlink loop though it is not.
-#      Two hints for this situation:
-#      I)  Play lottery the same day, as you seem to be rather lucky right now.
-#      II) Send patches.
-#
-#      return status:
-#      0 upon success
-#      1 file/dir not accesible
-#      2 symlink loop detected
-#
-#f1# List symlinks in detail (more detailed version of 'readlink -f', 'whence -s' and 'namei -l')
-function sll () {
-    if [[ -z ${1} ]] ; then
-        printf 'Usage: %s \n' "${0}"
-        return 1
-    fi
-
-    local file jumpd curdir
-    local -i 10 RTN LINODE i
-    local -a    SEENINODES
-    curdir="${PWD}"
-    RTN=0
-
-    for file in "${@}" ; do
-        SEENINODES=()
-        ls -l "${file:a}"   || RTN=1
-
-        while [[ -h "$file" ]] ; do
-            if is4 ; then
-                LINODE=$(zstat -L +inode "${file}")
-                for i in ${SEENINODES} ; do
-                    if (( ${i} == ${LINODE} )) ; then
-                        builtin cd -q "${curdir}"
-                        print 'link loop detected, aborting!'
-                        return 2
-                    fi
-                done
-                SEENINODES+=${LINODE}
-            fi
-            jumpd="${file:h}"
-            file="${file:t}"
-
-            if [[ -d ${jumpd} ]] ; then
-                builtin cd -q "${jumpd}"  || RTN=1
-            fi
-            file=$(readlink "$file")
-
-            jumpd="${file:h}"
-            file="${file:t}"
-
-            if [[ -d ${jumpd} ]] ; then
-                builtin cd -q "${jumpd}"  || RTN=1
-            fi
-
-            ls -l "${PWD}/${file}"     || RTN=1
-        done
-        shift 1
-        if (( ${#} >= 1 )) ; then
-            print ""
-        fi
-        builtin cd -q "${curdir}"
-    done
-    return ${RTN}
-}
-
-# TODO: Is it supported to use pager settings like this?
-#   PAGER='less -Mr' - If so, the use of $PAGER here needs fixing
-# with respect to wordsplitting. (ie. ${=PAGER})
-if check_com -c $PAGER ; then
-    #f3# View Debian's changelog of given package(s)
-    function dchange () {
-        emulate -L zsh
-        [[ -z "$1" ]] && printf 'Usage: %s \n' "$0" && return 1
-
-        local package
-        for package in "$@" ; do
-            if [[ -r /usr/share/doc/${package}/changelog.Debian.gz ]] ; then
-                $PAGER /usr/share/doc/${package}/changelog.Debian.gz
-            elif [[ -r /usr/share/doc/${package}/changelog.gz ]] ; then
-                $PAGER /usr/share/doc/${package}/changelog.gz
-            elif [[ -r /usr/share/doc/${package}/changelog ]] ; then
-                $PAGER /usr/share/doc/${package}/changelog
-            else
-                if check_com -c aptitude ; then
-                    echo "No changelog for package $package found, using aptitude to retrieve it."
-                    aptitude changelog "$package"
-                elif check_com -c apt-get ; then
-                    echo "No changelog for package $package found, using apt-get to retrieve it."
-                    apt-get changelog "$package"
-                else
-                    echo "No changelog for package $package found, sorry."
-                fi
-            fi
-        done
-    }
-    function _dchange () { _files -W /usr/share/doc -/ }
-    compdef _dchange dchange
-
-    #f3# View Debian's NEWS of a given package
-    function dnews () {
-        emulate -L zsh
-        if [[ -r /usr/share/doc/$1/NEWS.Debian.gz ]] ; then
-            $PAGER /usr/share/doc/$1/NEWS.Debian.gz
-        else
-            if [[ -r /usr/share/doc/$1/NEWS.gz ]] ; then
-                $PAGER /usr/share/doc/$1/NEWS.gz
-            else
-                echo "No NEWS file for package $1 found, sorry."
-                return 1
-            fi
-        fi
-    }
-    function _dnews () { _files -W /usr/share/doc -/ }
-    compdef _dnews dnews
-
-    #f3# View Debian's copyright of a given package
-    function dcopyright () {
-        emulate -L zsh
-        if [[ -r /usr/share/doc/$1/copyright ]] ; then
-            $PAGER /usr/share/doc/$1/copyright
-        else
-            echo "No copyright file for package $1 found, sorry."
-            return 1
-        fi
-    }
-    function _dcopyright () { _files -W /usr/share/doc -/ }
-    compdef _dcopyright dcopyright
-
-    #f3# View upstream's changelog of a given package
-    function uchange () {
-        emulate -L zsh
-        if [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
-            $PAGER /usr/share/doc/$1/changelog.gz
-        else
-            echo "No changelog for package $1 found, sorry."
-            return 1
-        fi
-    }
-    function _uchange () { _files -W /usr/share/doc -/ }
-    compdef _uchange uchange
-fi
-
-# zsh profiling
-function profile () {
-    ZSH_PROFILE_RC=1 zsh "$@"
-}
-
-#f1# Edit an alias via zle
-function edalias () {
-    [[ -z "$1" ]] && { echo "Usage: edalias " ; return 1 } || vared aliases'[$1]' ;
-}
-compdef _aliases edalias
-
-#f1# Edit a function via zle
-function edfunc () {
-    [[ -z "$1" ]] && { echo "Usage: edfunc " ; return 1 } || zed -f "$1" ;
-}
-compdef _functions edfunc
-
-# use it e.g. via 'Restart apache2'
-#m# f6 Start() \kbd{service \em{process}}\quad\kbd{start}
-#m# f6 Restart() \kbd{service \em{process}}\quad\kbd{restart}
-#m# f6 Stop() \kbd{service \em{process}}\quad\kbd{stop}
-#m# f6 Reload() \kbd{service \em{process}}\quad\kbd{reload}
-#m# f6 Force-Reload() \kbd{service \em{process}}\quad\kbd{force-reload}
-#m# f6 Status() \kbd{service \em{process}}\quad\kbd{status}
-if [[ -d /etc/init.d || -d /etc/service ]] ; then
-    function __start_stop () {
-        local action_="${1:l}"  # e.g Start/Stop/Restart
-        local service_="$2"
-        local param_="$3"
-
-        local service_target_="$(readlink /etc/init.d/$service_)"
-        if [[ $service_target_ == "/usr/bin/sv" ]]; then
-            # runit
-            case "${action_}" in
-                start) if [[ ! -e /etc/service/$service_ ]]; then
-                           $SUDO ln -s "/etc/sv/$service_" "/etc/service/"
-                       else
-                           $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
-                       fi ;;
-                # there is no reload in runits sysv emulation
-                reload) $SUDO "/etc/init.d/$service_" "force-reload" "$param_" ;;
-                *) $SUDO "/etc/init.d/$service_" "${action_}" "$param_" ;;
-            esac
-        else
-            # sysv/sysvinit-utils, upstart
-            if check_com -c service ; then
-              $SUDO service "$service_" "${action_}" "$param_"
-            else
-              $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
-            fi
-        fi
-    }
-
-    function _grmlinitd () {
-        local -a scripts
-        scripts=( /etc/init.d/*(x:t) )
-        _describe "service startup script" scripts
-    }
-
-    for i in Start Restart Stop Force-Reload Reload Status ; do
-        eval "function $i () { __start_stop $i \"\$1\" \"\$2\" ; }"
-        compdef _grmlinitd $i
-    done
-    builtin unset -v i
-fi
-
-#f1# Provides useful information on globbing
-function H-Glob () {
-    echo -e "
-    /      directories
-    .      plain files
-    @      symbolic links
-    =      sockets
-    p      named pipes (FIFOs)
-    *      executable plain files (0100)
-    %      device files (character or block special)
-    %b     block special files
-    %c     character special files
-    r      owner-readable files (0400)
-    w      owner-writable files (0200)
-    x      owner-executable files (0100)
-    A      group-readable files (0040)
-    I      group-writable files (0020)
-    E      group-executable files (0010)
-    R      world-readable files (0004)
-    W      world-writable files (0002)
-    X      world-executable files (0001)
-    s      setuid files (04000)
-    S      setgid files (02000)
-    t      files with the sticky bit (01000)
-
-  print *(m-1)          # Files modified up to a day ago
-  print *(a1)           # Files accessed a day ago
-  print *(@)            # Just symlinks
-  print *(Lk+50)        # Files bigger than 50 kilobytes
-  print *(Lk-50)        # Files smaller than 50 kilobytes
-  print **/*.c          # All *.c files recursively starting in \$PWD
-  print **/*.c~file.c   # Same as above, but excluding 'file.c'
-  print (foo|bar).*     # Files starting with 'foo' or 'bar'
-  print *~*.*           # All Files that do not contain a dot
-  chmod 644 *(.^x)      # make all plain non-executable files publically readable
-  print -l *(.c|.h)     # Lists *.c and *.h
-  print **/*(g:users:)  # Recursively match all files that are owned by group 'users'
-  echo /proc/*/cwd(:h:t:s/self//) # Analogous to >ps ax | awk '{print $1}'<"
-}
-alias help-zshglob=H-Glob
-
-# grep for running process, like: 'any vim'
-function any () {
-    emulate -L zsh
-    unsetopt KSH_ARRAYS
-    if [[ -z "$1" ]] ; then
-        echo "any - grep for process(es) by keyword" >&2
-        echo "Usage: any " >&2 ; return 1
-    else
-        ps xauwww | grep -i "${grep_options[@]}" "[${1[1]}]${1[2,-1]}"
-    fi
-}
-
-
-# After resuming from suspend, system is paging heavily, leading to very bad interactivity.
-# taken from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt
-[[ -r /proc/1/maps ]] && \
-function deswap () {
-    print 'Reading /proc/[0-9]*/maps and sending output to /dev/null, this might take a while.'
-    cat $(sed -ne 's:.* /:/:p' /proc/[0-9]*/maps | sort -u | grep -v '^/dev/')  > /dev/null
-    print 'Finished, running "swapoff -a; swapon -a" may also be useful.'
-}
-
-# a wrapper for vim, that deals with title setting
-#   VIM_OPTIONS
-#       set this array to a set of options to vim you always want
-#       to have set when calling vim (in .zshrc.local), like:
-#           VIM_OPTIONS=( -p )
-#       This will cause vim to send every file given on the
-#       commandline to be send to it's own tab (needs vim7).
-if check_com vim; then
-    function vim () {
-        VIM_PLEASE_SET_TITLE='yes' command vim ${VIM_OPTIONS} "$@"
-    }
-fi
-
-ssl_hashes=( sha512 sha256 sha1 md5 )
-
-for sh in ${ssl_hashes}; do
-    eval 'ssl-cert-'${sh}'() {
-        emulate -L zsh
-        if [[ -z $1 ]] ; then
-            printf '\''usage: %s \n'\'' "ssh-cert-'${sh}'"
-            return 1
-        fi
-        openssl x509 -noout -fingerprint -'${sh}' -in $1
-    }'
-done; unset sh
-
-function ssl-cert-fingerprints () {
-    emulate -L zsh
-    local i
-    if [[ -z $1 ]] ; then
-        printf 'usage: ssl-cert-fingerprints \n'
-        return 1
-    fi
-    for i in ${ssl_hashes}
-        do ssl-cert-$i $1;
-    done
-}
-
-function ssl-cert-info () {
-    emulate -L zsh
-    if [[ -z $1 ]] ; then
-        printf 'usage: ssl-cert-info \n'
-        return 1
-    fi
-    openssl x509 -noout -text -in $1
-    ssl-cert-fingerprints $1
-}
-
-# make sure our environment is clean regarding colors
-builtin unset -v BLUE RED GREEN CYAN YELLOW MAGENTA WHITE NO_COLOR
-
-# "persistent history"
-# just write important commands you always need to $GRML_IMPORTANT_COMMANDS
-# defaults for backward compatibility to ~/.important_commands
-if [[ -r ~/.important_commands ]] ; then
-    GRML_IMPORTANT_COMMANDS=~/.important_commands
-else
-    GRML_IMPORTANT_COMMANDS=${GRML_IMPORTANT_COMMANDS:-${ZDOTDIR:-${HOME}}/.important_commands}
-fi
-[[ -r ${GRML_IMPORTANT_COMMANDS} ]] && builtin fc -R ${GRML_IMPORTANT_COMMANDS}
-
-# load the lookup subsystem if it's available on the system
-zrcautoload lookupinit && lookupinit
-
-# variables
-
-# set terminal property (used e.g. by msgid-chooser)
-export COLORTERM="yes"
-
-# aliases
-
-# general
-#a2# Execute \kbd{du -sch}
-[[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias da='du -sch'
-
-# listing stuff
-#a2# Execute \kbd{ls -lSrah}
-alias dir="command ls -lSrah"
-#a2# Only show dot-directories
-alias lad='command ls -d .*(/)'
-#a2# Only show dot-files
-alias lsa='command ls -a .*(.)'
-#a2# Only files with setgid/setuid/sticky flag
-alias lss='command ls -l *(s,S,t)'
-#a2# Only show symlinks
-alias lsl='command ls -l *(@)'
-#a2# Display only executables
-alias lsx='command ls -l *(*)'
-#a2# Display world-{readable,writable,executable} files
-alias lsw='command ls -ld *(R,W,X.^ND/)'
-#a2# Display the ten biggest files
-alias lsbig="command ls -flh *(.OL[1,10])"
-#a2# Only show directories
-alias lsd='command ls -d *(/)'
-#a2# Only show empty directories
-alias lse='command ls -d *(/^F)'
-#a2# Display the ten newest files
-alias lsnew="command ls -rtlh *(D.om[1,10])"
-#a2# Display the ten oldest files
-alias lsold="command ls -rtlh *(D.Om[1,10])"
-#a2# Display the ten smallest files
-alias lssmall="command ls -Srl *(.oL[1,10])"
-#a2# Display the ten newest directories and ten newest .directories
-alias lsnewdir="command ls -rthdl *(/om[1,10]) .*(D/om[1,10])"
-#a2# Display the ten oldest directories and ten oldest .directories
-alias lsolddir="command ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])"
-
-# some useful aliases
-#a2# Remove current empty directory. Execute \kbd{cd ..; rmdir \$OLDCWD}
-alias rmcdir='cd ..; rmdir $OLDPWD || cd $OLDPWD'
-
-#a2# ssh with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
-alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
-#a2# scp with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
-alias insecscp='scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
-
-# work around non utf8 capable software in utf environment via $LANG and luit
-if check_com isutfenv && check_com luit ; then
-    if check_com -c mrxvt ; then
-        isutfenv && [[ -n "$LANG" ]] && \
-            alias mrxvt="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit mrxvt"
-    fi
-
-    if check_com -c aterm ; then
-        isutfenv && [[ -n "$LANG" ]] && \
-            alias aterm="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit aterm"
-    fi
-
-    if check_com -c centericq ; then
-        isutfenv && [[ -n "$LANG" ]] && \
-            alias centericq="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit centericq"
-    fi
-fi
-
-# useful functions
-
-#f5# Backup \kbd{file_or_folder {\rm to} file_or_folder\_timestamp}
-function bk () {
-    emulate -L zsh
-    local current_date=$(date -u "+%Y-%m-%dT%H:%M:%SZ")
-    local clean keep move verbose result all to_bk
-    setopt extended_glob
-    keep=1
-    while getopts ":hacmrv" opt; do
-        case $opt in
-            a) (( all++ ));;
-            c) unset move clean && (( ++keep ));;
-            m) unset keep clean && (( ++move ));;
-            r) unset move keep && (( ++clean ));;
-            v) verbose="-v";;
-            h) <<__EOF0__
-bk [-hcmv] FILE [FILE ...]
-bk -r [-av] [FILE [FILE ...]]
-Backup a file or folder in place and append the timestamp
-Remove backups of a file or folder, or all backups in the current directory
-
-Usage:
--h    Display this help text
--c    Keep the file/folder as is, create a copy backup using cp(1) (default)
--m    Move the file/folder, using mv(1)
--r    Remove backups of the specified file or directory, using rm(1). If none
-      is provided, remove all backups in the current directory.
--a    Remove all (even hidden) backups.
--v    Verbose
-
-The -c, -r and -m options are mutually exclusive. If specified at the same time,
-the last one is used.
-
-The return code is the sum of all cp/mv/rm return codes.
-__EOF0__
-return 0;;
-            \?) bk -h >&2; return 1;;
-        esac
-    done
-    shift "$((OPTIND-1))"
-    if (( keep > 0 )); then
-        if islinux || isfreebsd; then
-            for to_bk in "$@"; do
-                cp $verbose -a "${to_bk%/}" "${to_bk%/}_$current_date"
-                (( result += $? ))
-            done
-        else
-            for to_bk in "$@"; do
-                cp $verbose -pR "${to_bk%/}" "${to_bk%/}_$current_date"
-                (( result += $? ))
-            done
-        fi
-    elif (( move > 0 )); then
-        while (( $# > 0 )); do
-            mv $verbose "${1%/}" "${1%/}_$current_date"
-            (( result += $? ))
-            shift
-        done
-    elif (( clean > 0 )); then
-        if (( $# > 0 )); then
-            for to_bk in "$@"; do
-                rm $verbose -rf "${to_bk%/}"_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z
-                (( result += $? ))
-            done
-        else
-            if (( all > 0 )); then
-                rm $verbose -rf *_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z(D)
-            else
-                rm $verbose -rf *_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z
-            fi
-            (( result += $? ))
-        fi
-    fi
-    return $result
-}
-
-#f5# cd to directory and list files
-function cl () {
-    emulate -L zsh
-    cd $1 && ls -a
-}
-
-# smart cd function, allows switching to /etc when running 'cd /etc/fstab'
-function cd () {
-    if (( ${#argv} == 1 )) && [[ -f ${1} ]]; then
-        [[ ! -e ${1:h} ]] && return 1
-        print "Correcting ${1} to ${1:h}"
-        builtin cd ${1:h}
-    else
-        builtin cd "$@"
-    fi
-}
-
-#f5# Create Directory and \kbd{cd} to it
-function mkcd () {
-    if (( ARGC != 1 )); then
-        printf 'usage: mkcd \n'
-        return 1;
-    fi
-    if [[ ! -d "$1" ]]; then
-        command mkdir -p "$1"
-    else
-        printf '`%s'\'' already exists: cd-ing.\n' "$1"
-    fi
-    builtin cd "$1"
-}
-
-#f5# Create temporary directory and \kbd{cd} to it
-function cdt () {
-    builtin cd "$(mktemp -d)"
-    builtin pwd
-}
-
-#f5# List files which have been accessed within the last {\it n} days, {\it n} defaults to 1
-function accessed () {
-    emulate -L zsh
-    print -l -- *(a-${1:-1})
-}
-
-#f5# List files which have been changed within the last {\it n} days, {\it n} defaults to 1
-function changed () {
-    emulate -L zsh
-    print -l -- *(c-${1:-1})
-}
-
-#f5# List files which have been modified within the last {\it n} days, {\it n} defaults to 1
-function modified () {
-    emulate -L zsh
-    print -l -- *(m-${1:-1})
-}
-# modified() was named new() in earlier versions, add an alias for backwards compatibility
-check_com new || alias new=modified
-
-# use colors when GNU grep with color-support
-if (( $#grep_options > 0 )); then
-    o=${grep_options:+"${grep_options[*]}"}
-    #a2# Execute \kbd{grep -{}-color=auto}
-    alias grep='grep '$o
-    alias egrep='egrep '$o
-    unset o
-fi
-
-# Translate DE<=>EN
-# 'translate' looks up a word in a file with language-to-language
-# translations (field separator should be " : "). A typical wordlist looks
-# like the following:
-#  | english-word : german-translation
-# It's also only possible to translate english to german but not reciprocal.
-# Use the following oneliner to reverse the sort order:
-#  $ awk -F ':' '{ print $2" : "$1" "$3 }' \
-#    /usr/local/lib/words/en-de.ISO-8859-1.vok > ~/.translate/de-en.ISO-8859-1.vok
-#f5# Translates a word
-function trans () {
-    emulate -L zsh
-    case "$1" in
-        -[dD]*)
-            translate -l de-en $2
-            ;;
-        -[eE]*)
-            translate -l en-de $2
-            ;;
-        *)
-            echo "Usage: $0 { -D | -E }"
-            echo "         -D == German to English"
-            echo "         -E == English to German"
-    esac
-}
-
-# Usage: simple-extract 
-# Using option -d deletes the original archive file.
-#f5# Smart archive extractor
-function simple-extract () {
-    emulate -L zsh
-    setopt extended_glob noclobber
-    local ARCHIVE DELETE_ORIGINAL DECOMP_CMD USES_STDIN USES_STDOUT GZTARGET WGET_CMD
-    local RC=0
-    zparseopts -D -E "d=DELETE_ORIGINAL"
-    for ARCHIVE in "${@}"; do
-        case $ARCHIVE in
-            *(tar.bz2|tbz2|tbz))
-                DECOMP_CMD="tar -xvjf -"
-                USES_STDIN=true
-                USES_STDOUT=false
-                ;;
-            *(tar.gz|tgz))
-                DECOMP_CMD="tar -xvzf -"
-                USES_STDIN=true
-                USES_STDOUT=false
-                ;;
-            *(tar.xz|txz|tar.lzma))
-                DECOMP_CMD="tar -xvJf -"
-                USES_STDIN=true
-                USES_STDOUT=false
-                ;;
-            *tar)
-                DECOMP_CMD="tar -xvf -"
-                USES_STDIN=true
-                USES_STDOUT=false
-                ;;
-            *rar)
-                DECOMP_CMD="unrar x"
-                USES_STDIN=false
-                USES_STDOUT=false
-                ;;
-            *lzh)
-                DECOMP_CMD="lha x"
-                USES_STDIN=false
-                USES_STDOUT=false
-                ;;
-            *7z)
-                DECOMP_CMD="7z x"
-                USES_STDIN=false
-                USES_STDOUT=false
-                ;;
-            *(zip|jar))
-                DECOMP_CMD="unzip"
-                USES_STDIN=false
-                USES_STDOUT=false
-                ;;
-            *deb)
-                DECOMP_CMD="ar -x"
-                USES_STDIN=false
-                USES_STDOUT=false
-                ;;
-            *bz2)
-                DECOMP_CMD="bzip2 -d -c -"
-                USES_STDIN=true
-                USES_STDOUT=true
-                ;;
-            *(gz|Z))
-                DECOMP_CMD="gzip -d -c -"
-                USES_STDIN=true
-                USES_STDOUT=true
-                ;;
-            *(xz|lzma))
-                DECOMP_CMD="xz -d -c -"
-                USES_STDIN=true
-                USES_STDOUT=true
-                ;;
-            *)
-                print "ERROR: '$ARCHIVE' has unrecognized archive type." >&2
-                RC=$((RC+1))
-                continue
-                ;;
-        esac
-
-        if ! check_com ${DECOMP_CMD[(w)1]}; then
-            echo "ERROR: ${DECOMP_CMD[(w)1]} not installed." >&2
-            RC=$((RC+2))
-            continue
-        fi
-
-        GZTARGET="${ARCHIVE:t:r}"
-        if [[ -f $ARCHIVE ]] ; then
-
-            print "Extracting '$ARCHIVE' ..."
-            if $USES_STDIN; then
-                if $USES_STDOUT; then
-                    ${=DECOMP_CMD} < "$ARCHIVE" > $GZTARGET
-                else
-                    ${=DECOMP_CMD} < "$ARCHIVE"
-                fi
-            else
-                if $USES_STDOUT; then
-                    ${=DECOMP_CMD} "$ARCHIVE" > $GZTARGET
-                else
-                    ${=DECOMP_CMD} "$ARCHIVE"
-                fi
-            fi
-            [[ $? -eq 0 && -n "$DELETE_ORIGINAL" ]] && rm -f "$ARCHIVE"
-
-        elif [[ "$ARCHIVE" == (#s)(https|http|ftp)://* ]] ; then
-            if check_com curl; then
-                WGET_CMD="curl -L -s -o -"
-            elif check_com wget; then
-                WGET_CMD="wget -q -O -"
-            elif check_com fetch; then
-                WGET_CMD="fetch -q -o -"
-            else
-                print "ERROR: neither wget, curl nor fetch is installed" >&2
-                RC=$((RC+4))
-                continue
-            fi
-            print "Downloading and Extracting '$ARCHIVE' ..."
-            if $USES_STDIN; then
-                if $USES_STDOUT; then
-                    ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD} > $GZTARGET
-                    RC=$((RC+$?))
-                else
-                    ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD}
-                    RC=$((RC+$?))
-                fi
-            else
-                if $USES_STDOUT; then
-                    ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE") > $GZTARGET
-                else
-                    ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE")
-                fi
-            fi
-
-        else
-            print "ERROR: '$ARCHIVE' is neither a valid file nor a supported URI." >&2
-            RC=$((RC+8))
-        fi
-    done
-    return $RC
-}
-
-function __archive_or_uri () {
-    _alternative \
-        'files:Archives:_files -g "*.(#l)(tar.bz2|tbz2|tbz|tar.gz|tgz|tar.xz|txz|tar.lzma|tar|rar|lzh|7z|zip|jar|deb|bz2|gz|Z|xz|lzma)"' \
-        '_urls:Remote Archives:_urls'
-}
-
-function _simple_extract () {
-    _arguments \
-        '-d[delete original archivefile after extraction]' \
-        '*:Archive Or Uri:__archive_or_uri'
-}
-compdef _simple_extract simple-extract
-[[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias se=simple-extract
-
-#f5# Change the xterm title from within GNU-screen
-function xtrename () {
-    emulate -L zsh
-    if [[ $1 != "-f" ]] ; then
-        if [[ -z ${DISPLAY} ]] ; then
-            printf 'xtrename only makes sense in X11.\n'
-            return 1
-        fi
-    else
-        shift
-    fi
-    if [[ -z $1 ]] ; then
-        printf 'usage: xtrename [-f] "title for xterm"\n'
-        printf '  renames the title of xterm from _within_ screen.\n'
-        printf '  also works without screen.\n'
-        printf '  will not work if DISPLAY is unset, use -f to override.\n'
-        return 0
-    fi
-    print -n "\eP\e]0;${1}\C-G\e\\"
-    return 0
-}
-
-# Create small urls via http://goo.gl using curl(1).
-# API reference: https://code.google.com/apis/urlshortener/
-function zurl () {
-    emulate -L zsh
-    setopt extended_glob
-
-    if [[ -z $1 ]]; then
-        print "USAGE: zurl "
-        return 1
-    fi
-
-    local PN url prog api json contenttype item
-    local -a data
-    PN=$0
-    url=$1
-
-    # Prepend 'http://' to given URL where necessary for later output.
-    if [[ ${url} != http(s|)://* ]]; then
-        url='http://'${url}
-    fi
-
-    if check_com -c curl; then
-        prog=curl
-    else
-        print "curl is not available, but mandatory for ${PN}. Aborting."
-        return 1
-    fi
-    api='https://www.googleapis.com/urlshortener/v1/url'
-    contenttype="Content-Type: application/json"
-    json="{\"longUrl\": \"${url}\"}"
-    data=(${(f)"$($prog --silent -H ${contenttype} -d ${json} $api)"})
-    # Parse the response
-    for item in "${data[@]}"; do
-        case "$item" in
-            ' '#'"id":'*)
-                item=${item#*: \"}
-                item=${item%\",*}
-                printf '%s\n' "$item"
-                return 0
-                ;;
-        esac
-    done
-    return 1
-}
-
-#f2# Find history events by search pattern and list them by date.
-function whatwhen () {
-    emulate -L zsh
-    local usage help ident format_l format_s first_char remain first last
-    usage='USAGE: whatwhen [options]  '
-    help='Use `whatwhen -h'\'' for further explanations.'
-    ident=${(l,${#${:-Usage: }},, ,)}
-    format_l="${ident}%s\t\t\t%s\n"
-    format_s="${format_l//(\\t)##/\\t}"
-    # Make the first char of the word to search for case
-    # insensitive; e.g. [aA]
-    first_char=[${(L)1[1]}${(U)1[1]}]
-    remain=${1[2,-1]}
-    # Default search range is `-100'.
-    first=${2:-\-100}
-    # Optional, just used for ` ' given.
-    last=$3
-    case $1 in
-        ("")
-            printf '%s\n\n' 'ERROR: No search string specified. Aborting.'
-            printf '%s\n%s\n\n' ${usage} ${help} && return 1
-        ;;
-        (-h)
-            printf '%s\n\n' ${usage}
-            print 'OPTIONS:'
-            printf $format_l '-h' 'show help text'
-            print '\f'
-            print 'SEARCH RANGE:'
-            printf $format_l "'0'" 'the whole history,'
-            printf $format_l '-' 'offset to the current history number; (default: -100)'
-            printf $format_s '<[-]first> []' 'just searching within a give range'
-            printf '\n%s\n' 'EXAMPLES:'
-            printf ${format_l/(\\t)/} 'whatwhen grml' '# Range is set to -100 by default.'
-            printf $format_l 'whatwhen zsh -250'
-            printf $format_l 'whatwhen foo 1 99'
-        ;;
-        (\?)
-            printf '%s\n%s\n\n' ${usage} ${help} && return 1
-        ;;
-        (*)
-            # -l list results on stout rather than invoking $EDITOR.
-            # -i Print dates as in YYYY-MM-DD.
-            # -m Search for a - quoted - pattern within the history.
-            fc -li -m "*${first_char}${remain}*" $first $last
-        ;;
-    esac
-}
-
-# mercurial related stuff
-if check_com -c hg ; then
-    # gnu like diff for mercurial
-    # http://www.selenic.com/mercurial/wiki/index.cgi/TipsAndTricks
-    #f5# GNU like diff for mercurial
-    function hgdi () {
-        emulate -L zsh
-        local i
-        for i in $(hg status -marn "$@") ; diff -ubwd <(hg cat "$i") "$i"
-    }
-
-    # build debian package
-    #a2# Alias for \kbd{hg-buildpackage}
-    alias hbp='hg-buildpackage'
-
-    # execute commands on the versioned patch-queue from the current repos
-    [[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias mq='hg -R $(readlink -f $(hg root)/.hg/patches)'
-
-    # diffstat for specific version of a mercurial repository
-    #   hgstat      => display diffstat between last revision and tip
-    #   hgstat 1234 => display diffstat between revision 1234 and tip
-    #f5# Diffstat for specific version of a mercurial repos
-    function hgstat () {
-        emulate -L zsh
-        [[ -n "$1" ]] && hg diff -r $1 -r tip | diffstat || hg export tip | diffstat
-    }
-
-fi # end of check whether we have the 'hg'-executable
-
-# grml-small cleanups
-
-# The following is used to remove zsh-config-items that do not work
-# in grml-small by default.
-# If you do not want these adjustments (for whatever reason), set
-# $GRMLSMALL_SPECIFIC to 0 in your .zshrc.pre file (which this configuration
-# sources if it is there).
-
-if (( GRMLSMALL_SPECIFIC > 0 )) && isgrmlsmall ; then
-
-    unset "abk[V]"
-    unalias    'V'      &> /dev/null
-    unfunction vman     &> /dev/null
-    unfunction viless   &> /dev/null
-    unfunction 2html    &> /dev/null
-
-    # manpages are not in grmlsmall
-    unfunction manzsh   &> /dev/null
-    unfunction man2     &> /dev/null
-
-fi
-
-zrclocal
-
-## genrefcard.pl settings
-
-### doc strings for external functions from files
-#m# f5 grml-wallpaper() Sets a wallpaper (try completion for possible values)
-
-### example: split functions-search 8,16,24,32
-#@# split functions-search 8
-
-## END OF FILE #################################################################
-# vim:filetype=zsh foldmethod=marker autoindent expandtab shiftwidth=4
-# Local variables:
-# mode: sh
-# End:
diff --git a/roles/baseconfig/files/skel/dot_zshrc.local b/roles/baseconfig/files/skel/dot_zshrc.local
deleted file mode 100644
index 01e515e..0000000
--- a/roles/baseconfig/files/skel/dot_zshrc.local
+++ /dev/null
@@ -1,326 +0,0 @@
-# Filename:      /etc/skel/.zshrc
-# Purpose:       config file for zsh (z shell)
-# Authors:       (c) grml-team (grml.org)
-# Bug-Reports:   see http://grml.org/bugs/
-# License:       This file is licensed under the GPL v2 or any later version.
-################################################################################
-# Nowadays, grml's zsh setup lives in only *one* zshrc file.
-# That is the global one: /etc/zsh/zshrc (from grml-etc-core).
-# It is best to leave *this* file untouched and do personal changes to
-# your zsh setup via ${HOME}/.zshrc.local which is loaded at the end of
-# the global zshrc.
-#
-# That way, we enable people on other operating systems to use our
-# setup, too, just by copying our global zshrc to their ${HOME}/.zshrc.
-# Adjustments would still go to the .zshrc.local file.
-################################################################################
-
-## Aurore host color and white user
-zstyle ':prompt:grml:left:items:host' pre '%B%F{red}'
-zstyle ':prompt:grml:left:items:host' post '%f%b'
-zstyle ':prompt:grml:left:items:user' pre '%B'
-zstyle ':prompt:grml:left:items:user' post '%b'
-
-## Settings for umask
-#if (( EUID == 0 )); then
-#    umask 002
-#else
-#    umask 022
-#fi
-
-## Now, we'll give a few examples of what you might want to use in your
-## .zshrc.local file (just copy'n'paste and uncomment it there):
-
-## Prompt theme extension ##
-
-# Virtualenv support
-
-#function virtual_env_prompt () {
-#    REPLY=${VIRTUAL_ENV+(${VIRTUAL_ENV:t}) }
-#}
-#grml_theme_add_token  virtual-env -f virtual_env_prompt '%F{magenta}' '%f'
-#zstyle ':prompt:grml:left:setup' items rc virtual-env change-root user at host path vcs percent
-
-## ZLE tweaks ##
-
-## use the vi navigation keys (hjkl) besides cursor keys in menu completion
-#bindkey -M menuselect 'h' vi-backward-char        # left
-#bindkey -M menuselect 'k' vi-up-line-or-history   # up
-#bindkey -M menuselect 'l' vi-forward-char         # right
-#bindkey -M menuselect 'j' vi-down-line-or-history # bottom
-
-## set command prediction from history, see 'man 1 zshcontrib'
-#is4 && zrcautoload predict-on && \
-#zle -N predict-on         && \
-#zle -N predict-off        && \
-#bindkey "^X^Z" predict-on && \
-#bindkey "^Z" predict-off
-
-## press ctrl-q to quote line:
-#mquote () {
-#      zle beginning-of-line
-#      zle forward-word
-#      # RBUFFER="'$RBUFFER'"
-#      RBUFFER=${(q)RBUFFER}
-#      zle end-of-line
-#}
-#zle -N mquote && bindkey '^q' mquote
-
-## define word separators (for stuff like backward-word, forward-word, backward-kill-word,..)
-#WORDCHARS='*?_-.[]~=/&;!#$%^(){}<>' # the default
-#WORDCHARS=.
-#WORDCHARS='*?_[]~=&;!#$%^(){}'
-#WORDCHARS='${WORDCHARS:s@/@}'
-
-# just type '...' to get '../..'
-#rationalise-dot() {
-#local MATCH
-#if [[ $LBUFFER =~ '(^|/| |	|'$'\n''|\||;|&)\.\.$' ]]; then
-#  LBUFFER+=/
-#  zle self-insert
-#  zle self-insert
-#else
-#  zle self-insert
-#fi
-#}
-#zle -N rationalise-dot
-#bindkey . rationalise-dot
-## without this, typing a . aborts incremental history search
-#bindkey -M isearch . self-insert
-
-#bindkey '\eq' push-line-or-edit
-
-## some popular options ##
-
-## add `|' to output redirections in the history
-#setopt histallowclobber
-
-## try to avoid the 'zsh: no matches found...'
-#setopt nonomatch
-
-## warning if file exists ('cat /dev/null > ~/.zshrc')
-#setopt NO_clobber
-
-## don't warn me about bg processes when exiting
-#setopt nocheckjobs
-
-## alert me if something failed
-#setopt printexitvalue
-
-## with spelling correction, assume dvorak kb
-#setopt dvorak
-
-## Allow comments even in interactive shells
-#setopt interactivecomments
-
-
-## compsys related snippets ##
-
-## changed completer settings
-#zstyle ':completion:*' completer _complete _correct _approximate
-#zstyle ':completion:*' expand prefix suffix
-
-## another different completer setting: expand shell aliases
-#zstyle ':completion:*' completer _expand_alias _complete _approximate
-
-## to have more convenient account completion, specify your logins:
-#my_accounts=(
-# {grml,grml1}@foo.invalid
-# grml-devel@bar.invalid
-#)
-#other_accounts=(
-# {fred,root}@foo.invalid
-# vera@bar.invalid
-#)
-#zstyle ':completion:*:my-accounts' users-hosts $my_accounts
-#zstyle ':completion:*:other-accounts' users-hosts $other_accounts
-
-## add grml.org to your list of hosts
-#hosts+=(grml.org)
-#zstyle ':completion:*:hosts' hosts $hosts
-
-## telnet on non-default ports? ...well:
-## specify specific port/service settings:
-#telnet_users_hosts_ports=(
-#  user1@host1:
-#  user2@host2:
-#  @mail-server:{smtp,pop3}
-#  @news-server:nntp
-#  @proxy-server:8000
-#)
-#zstyle ':completion:*:*:telnet:*' users-hosts-ports $telnet_users_hosts_ports
-
-## the default grml setup provides '..' as a completion. it does not provide
-## '.' though. If you want that too, use the following line:
-#zstyle ':completion:*' special-dirs true
-
-## aliases ##
-
-## translate
-#alias u='translate -i'
-
-## ignore ~/.ssh/known_hosts entries
-#alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null" -o "PreferredAuthentications=keyboard-interactive"'
-
-
-## global aliases (for those who like them) ##
-
-#alias -g '...'='../..'
-#alias -g '....'='../../..'
-#alias -g BG='& exit'
-#alias -g C='|wc -l'
-#alias -g G='|grep'
-#alias -g H='|head'
-#alias -g Hl=' --help |& less -r'
-#alias -g K='|keep'
-#alias -g L='|less'
-#alias -g LL='|& less -r'
-#alias -g M='|most'
-#alias -g N='&>/dev/null'
-#alias -g R='| tr A-z N-za-m'
-#alias -g SL='| sort | less'
-#alias -g S='| sort'
-#alias -g T='|tail'
-#alias -g V='| vim -'
-
-## instead of global aliase it might be better to use grmls $abk assoc array, whose contents are expanded after pressing ,.
-#$abk[SnL]="| sort -n | less"
-
-## get top 10 shell commands:
-#alias top10='print -l ${(o)history%% *} | uniq -c | sort -nr | head -n 10'
-
-## Execute \kbd{./configure}
-#alias CO="./configure"
-
-## Execute \kbd{./configure --help}
-#alias CH="./configure --help"
-
-## miscellaneous code ##
-
-## Use a default width of 80 for manpages for more convenient reading
-#export MANWIDTH=${MANWIDTH:-80}
-
-## Set a search path for the cd builtin
-#cdpath=(.. ~)
-
-## variation of our manzsh() function; pick you poison:
-#manzsh()  { /usr/bin/man zshall |  most +/"$1" ; }
-
-## Switching shell safely and efficiently? http://www.zsh.org/mla/workers/2001/msg02410.html
-#bash() {
-#    NO_SWITCH="yes" command bash "$@"
-#}
-#restart () {
-#    exec $SHELL $SHELL_ARGS "$@"
-#}
-
-## Handy functions for use with the (e::) globbing qualifier (like nt)
-#contains() { grep -q "$*" $REPLY }
-#sameas() { diff -q "$*" $REPLY &>/dev/null }
-#ot () { [[ $REPLY -ot ${~1} ]] }
-
-## get_ic() - queries imap servers for capabilities; real simple. no imaps
-#ic_get() {
-#    emulate -L zsh
-#    local port
-#    if [[ ! -z $1 ]] ; then
-#        port=${2:-143}
-#        print "querying imap server on $1:${port}...\n";
-#        print "a1 capability\na2 logout\n" | nc $1 ${port}
-#    else
-#        print "usage:\n  $0  [port]"
-#    fi
-#}
-
-## List all occurrences of programm in current PATH
-#plap() {
-#    emulate -L zsh
-#    if [[ $# = 0 ]] ; then
-#        echo "Usage:    $0 program"
-#        echo "Example:  $0 zsh"
-#        echo "Lists all occurrences of program in the current PATH."
-#    else
-#        ls -l ${^path}/*$1*(*N)
-#    fi
-#}
-
-## Find out which libs define a symbol
-#lcheck() {
-#    if [[ -n "$1" ]] ; then
-#        nm -go /usr/lib/lib*.a 2>/dev/null | grep ":[[:xdigit:]]\{8\} . .*$1"
-#    else
-#        echo "Usage: lcheck " >&2
-#    fi
-#}
-
-## Download a file and display it locally
-#uopen() {
-#    emulate -L zsh
-#    if ! [[ -n "$1" ]] ; then
-#        print "Usage: uopen \$URL/\$file">&2
-#        return 1
-#    else
-#        FILE=$1
-#        MIME=$(curl --head $FILE | \
-#               grep Content-Type | \
-#               cut -d ' ' -f 2 | \
-#               cut -d\; -f 1)
-#        MIME=${MIME%$'\r'}
-#        curl $FILE | see ${MIME}:-
-#    fi
-#}
-
-## Memory overview
-#memusage() {
-#    ps aux | awk '{if (NR > 1) print $5;
-#                   if (NR > 2) print "+"}
-#                   END { print "p" }' | dc
-#}
-
-## print hex value of a number
-#hex() {
-#    emulate -L zsh
-#    if [[ -n "$1" ]]; then
-#        printf "%x\n" $1
-#    else
-#        print 'Usage: hex '
-#        return 1
-#    fi
-#}
-
-## log out? set timeout in seconds...
-## ...and do not log out in some specific terminals:
-#if [[ "${TERM}" == ([Exa]term*|rxvt|dtterm|screen*) ]] ; then
-#    unset TMOUT
-#else
-#    TMOUT=1800
-#fi
-
-## associate types and extensions (be aware with perl scripts and anwanted behaviour!)
-#check_com zsh-mime-setup || { autoload zsh-mime-setup && zsh-mime-setup }
-#alias -s pl='perl -S'
-
-## ctrl-s will no longer freeze the terminal.
-#stty erase "^?"
-
-## you want to automatically use a bigger font on big terminals?
-#if [[ "$TERM" == "xterm" ]] && [[ "$LINES" -ge 50 ]] && [[ "$COLUMNS" -ge 100 ]] && [[ -z "$SSH_CONNECTION" ]] ; then
-#    large
-#fi
-
-## Some quick Perl-hacks aka /useful/ oneliner
-#bew() { perl -le 'print unpack "B*","'$1'"' }
-#web() { perl -le 'print pack "B*","'$1'"' }
-#hew() { perl -le 'print unpack "H*","'$1'"' }
-#weh() { perl -le 'print pack "H*","'$1'"' }
-#pversion()    { perl -M$1 -le "print $1->VERSION" } # i. e."pversion LWP -> 5.79"
-#getlinks ()   { perl -ne 'while ( m/"((www|ftp|http):\/\/.*?)"/gc ) { print $1, "\n"; }' $* }
-#gethrefs ()   { perl -ne 'while ( m/href="([^"]*)"/gc ) { print $1, "\n"; }' $* }
-#getanames ()  { perl -ne 'while ( m/a name="([^"]*)"/gc ) { print $1, "\n"; }' $* }
-#getforms ()   { perl -ne 'while ( m:(\):gic ) { print $1, "\n"; }' $* }
-#getstrings () { perl -ne 'while ( m/"(.*?)"/gc ) { print $1, "\n"; }' $*}
-#showINC ()    { perl -e 'for (@INC) { printf "%d %s\n", $i++, $_ }' }
-#vimpm ()      { vim `perldoc -l $1 | sed -e 's/pod$/pm/'` }
-#vimhelp ()    { vim -c "help $1" -c on -c "au! VimEnter *" }
-
-## END OF FILE #################################################################
diff --git a/roles/baseconfig/files/update-motd.d/00-logo b/roles/baseconfig/files/update-motd.d/00-logo
deleted file mode 100755
index 025257f..0000000
--- a/roles/baseconfig/files/update-motd.d/00-logo
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/sh
-# {{ ansible_managed }}
-
-# Pretty uptime
-upSeconds="$(/usr/bin/cut -d. -f1 /proc/uptime)"
-mins=$((${upSeconds}/60%60))
-hours=$((${upSeconds}/3600%24))
-days=$((${upSeconds}/86400))
-UPTIME=`printf "%d jours, %02dh%02dm" "$days" "$hours" "$mins"`
-
-# RAM
-RAM=`free -m | awk 'NR==2{printf "%s/%sMB (%.2f%%)\n", $3,$2,$3*100/$2 }'`
-DISK=`df -h | awk '$NF=="/"{printf "%d/%dGB (%s)\n", $3,$2,$5}'`
-
-# Text font
-bold=$(tput bold)
-normal=$(tput sgr0)
-
-# Logo
-cat << EOF
-
-                                            ${bold}Uptime${normal} : ${UPTIME}
-                                            ${bold}Mémoire${normal} : ${RAM}
-                                            ${bold}Disque racine${normal} : ${DISK}
-                                         
-                                         
-                                         
-                                         
-                                         
-                                         
-                                         
-                                         
-                                         
-                                         
-                                         
-                                         
-                   ${bold}Aurore${normal}                
-
-EOF
diff --git a/roles/baseconfig/files/update-motd.d/10-uname b/roles/baseconfig/files/update-motd.d/10-uname
deleted file mode 100755
index 4586095..0000000
--- a/roles/baseconfig/files/update-motd.d/10-uname
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/sh
-# {{ ansible_managed }}
-uname -snrvm
diff --git a/roles/baseconfig/handlers/main.yml b/roles/baseconfig/handlers/main.yml
deleted file mode 100644
index 66c2de1..0000000
--- a/roles/baseconfig/handlers/main.yml
+++ /dev/null
@@ -1,4 +0,0 @@
----
-# Reconfigure locales when conf changes
-- name: Reconfigure locales
-  command: dpkg-reconfigure locales -f noninteractive
diff --git a/roles/baseconfig/tasks/main.yml b/roles/baseconfig/tasks/main.yml
deleted file mode 100644
index 744e12b..0000000
--- a/roles/baseconfig/tasks/main.yml
+++ /dev/null
@@ -1,52 +0,0 @@
----
-- name: Install basic tools
-  apt:
-    name:
-      - apt  # better than apt-get
-      - aptitude  # nice to have for Ansible
-      - bash-completion  # because bash
-      - curl  # better than wget
-      - git  # code versioning
-      - htop  # better than top
-      - less  # i like cats
-      - sudo  # i am god
-      - tmux  # better than screen
-      - tree  # create a graphical tree of files
-      - vim  # better than nano
-      - molly-guard  # prevent reboot
-      - ntp  # network time sync
-      - emacs-nox  # for maman
-    update_cache: true
-  register: apt_result
-  retries: 3
-  until: apt_result is succeeded
-
-# Pimp my server
-- name: Customize motd
-  copy:
-    src: "update-motd.d/{{ item }}"
-    dest: "/etc/update-motd.d/{{ item }}"
-    mode: 0755
-  loop:
-    - 00-logo
-    - 10-uname
-
-- name: Remove Debian warranty motd
-  file:
-    path: /etc/motd
-    state: absent
-
-# Patriotisme
-- name: Ensure French UTF-8 locale exists
-  locale_gen:
-    name: fr_FR.UTF-8
-    state: present
-
-# Fix LC_CTYPE="C"
-- name: Select default locale
-  debconf:
-    name: locales
-    question: locales/default_environment_locale
-    value: fr_FR.UTF-8
-    vtype: select
-  notify: Reconfigure locales
diff --git a/roles/bind/handlers/main.yml b/roles/bind/handlers/main.yml
new file mode 100644
index 0000000..5b4e100
--- /dev/null
+++ b/roles/bind/handlers/main.yml
@@ -0,0 +1,6 @@
+---
+
+- name: Restart bind
+  service:
+    name: bind9
+    state: restarted
diff --git a/roles/bind/tasks/main.yml b/roles/bind/tasks/main.yml
new file mode 100644
index 0000000..eeae731
--- /dev/null
+++ b/roles/bind/tasks/main.yml
@@ -0,0 +1,23 @@
+---
+
+- name: Queries apt to install bind9
+  apt:
+    name:
+      - bind9
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  notify: Restart bind
+
+- name: Deploy named local configuration
+  template:
+    src: 'named.conf.local.j2'
+    dest: '/etc/bind/named.conf.local'
+  notify: Restart bind
+
+- name: Deploy per-site configuration
+  template:
+    src: 'db.j2'
+    dest: '/var/lib/bind/{{ item.name }}/db'
+  with_items: '{{ bind.domains }}'
+  notify: Restart bind
diff --git a/roles/bind/templates/db.j2 b/roles/bind/templates/db.j2
new file mode 100644
index 0000000..787d802
--- /dev/null
+++ b/roles/bind/templates/db.j2
@@ -0,0 +1,21 @@
+$TTL 3600
+@ IN SOA dns {{ item.administrator }}. (
+  {{ '%Y%m%d%H' | strftime }} ;Serial
+  3600 ;Refresh
+  1800 ;Retry
+  3600000 ;Expire
+  172800 ;Minimum
+)
+
+{{ item.name }}.    IN NS dns
+{{ item.name }}.    IN NS slave
+{{ item.name }}.    IN A {{ item.ipv4 }}
+{{ item.name }}.    IN AAAA {{ item.ipv6 }}
+
+dns         IN A {{ item.ipv4 }}
+dns         IN AAAA {{ item.ipv6 }}
+slave       IN A {{ item.slave }}
+
+{% for alias in item.aliases %}
+{{ alias }} IN CNAME @
+{% endfor %}
diff --git a/roles/bind/templates/named.conf.local.j2 b/roles/bind/templates/named.conf.local.j2
new file mode 100644
index 0000000..4e86694
--- /dev/null
+++ b/roles/bind/templates/named.conf.local.j2
@@ -0,0 +1,16 @@
+//
+// Do any local configuration here
+//
+
+// Consider adding the 1918 zones here, if they are not used in your
+// organization
+//include "/etc/bind/zones.rfc1918";
+
+{% for domain in bind.domains %}
+zone "{{ domain.name }}" {
+  type master;
+  file "/var/lib/bind/{{ domain.name }}/db";
+  notify yes;
+  allow-transfer { {{ domain.slave }}; };
+};
+{% endfor %}
diff --git a/roles/cli-utils/tasks/main.yml b/roles/cli-utils/tasks/main.yml
new file mode 100644
index 0000000..87a3db0
--- /dev/null
+++ b/roles/cli-utils/tasks/main.yml
@@ -0,0 +1,36 @@
+---
+- name: Install cli utilities
+  package:
+    name:
+      - bash
+      - bash-completion
+      - bat
+      - git
+      - sl
+      - htop
+      - tmux
+      - tree
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+  when: user.root
+
+- name: Create directory hierarchy
+  file:
+    path: '.config/{{ item }}'
+    state: directory
+  with_items:
+    - 'git/'
+    - 'bash/'
+
+- name: Deploying config files
+  template:
+    src: '{{ item.src }}'
+    dest: '{{ item.dest }}'
+  with_items:
+    - { src: bashrc.j2, dest: .bashrc }
+    - { src: inputrc.j2, dest: .inputrc }
+    - { src: bash_aliases.j2, dest: .config/bash/bash_aliases }
+    - { src: gitconfig.j2, dest: .config/git/config }
+    - { src: tmux.conf.j2, dest: .tmux.conf }
diff --git a/roles/cli-utils/templates/bash_aliases.j2 b/roles/cli-utils/templates/bash_aliases.j2
new file mode 100644
index 0000000..b75df01
--- /dev/null
+++ b/roles/cli-utils/templates/bash_aliases.j2
@@ -0,0 +1,41 @@
+#!/bin/bash
+
+# enable color support of ls and also add handy aliases
+if [ -x /usr/bin/dircolors ]; then
+    test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
+    alias ls='ls --color=auto'
+
+    alias grep='grep --color=always'
+    alias fgrep='fgrep --color=always'
+    alias egrep='egrep --color=always'
+fi
+
+# some more ls aliases
+alias ll='ls -alF'
+alias la='ls -A'
+alias l='ls -CF'
+
+alias cd='cd -P'
+alias ip='ip -c'
+
+alias less='less -R'
+
+alias toilet='toilet -f mono12 --rainbow'
+
+alias startx='exec startx'
+
+alias gst='git status -s'
+
+alias proxy='ssh -q -C -N -D 8080'
+alias wip='watch -c ip -c'
+
+alias vi=vim
+alias cat=bat
+
+# Add some emoji aliases
+alias 🦇=bat
+alias 🐈=cat
+alias 🚆=sl
+alias 🚂=sl
+alias 🚅=sl
+alias 💿=cd
diff --git a/roles/cli-utils/templates/bashrc.j2 b/roles/cli-utils/templates/bashrc.j2
new file mode 100644
index 0000000..029c81d
--- /dev/null
+++ b/roles/cli-utils/templates/bashrc.j2
@@ -0,0 +1,57 @@
+[ -z "$PS1" ] && return
+
+HISTCONTROL=ignoredups:ignorespace
+HISTFILE=/dev/null
+
+# check the window size after each command and, if necessary,
+# update the values of LINES and COLUMNS.
+shopt -s checkwinsize
+
+# make less more friendly for non-text input files, see lesspipe(1)
+[ -x /usr/bin/lesspipe.sh ] && eval "$(SHELL=/bin/sh lesspipe.sh)"
+
+
+PROMPT_COMMAND=__prompt
+
+__prompt() {
+  retline=$?
+  gitline=$(git branch 2> /dev/null | grep '^*' | awk '{print $2}')
+
+  # COLORS
+  RED='\[\e[01;31m\]'
+  GREEN='\[\e[01;32m\]'
+  ORANGE='\[\e[01;33m\]'
+  BLUE='\[\e[01;34m\]'
+  NC='\[\e[0m\]'
+
+  PS1=""
+  PS1+="$GREEN\u@\h$NC" # user@host
+  PS1+=" $BLUE\W$NC" # pwd
+  [ -z $gitline ] || PS1+=" $ORANGE$gitline$NC"
+  PS1="[ $PS1 ]"
+  [ $retline -ne 0 ] && PS1+=" $RED$retline$NC "
+  PS1+="\$ "
+  return $ret
+}
+
+if [ -f ~/.config/bash/bash_aliases ]; then
+    . ~/.config/bash/bash_aliases
+fi
+
+rm -rf {{ cliutils.bash.bogus_dirs | join(" ") }}
+
+
+if [ -f /usr/share/bash-completion/bash_completion ]; then
+  . /usr/share/bash-completion/bash_completion
+fi
+
+export XDG_CONFIG_HOME=~/.config/
+grep -q '/\.local/bin'<<<$PATH || export PATH=$PATH:~/.local/bin/
+
+## REMOVING LESSHST
+LESSHISTFILE=/dev/null
+
+export EDITOR='vim'
+
+export PASSWORD_STORE_ENABLE_EXTENSIONS=true
+
diff --git a/roles/cli-utils/templates/gitconfig.j2 b/roles/cli-utils/templates/gitconfig.j2
new file mode 100644
index 0000000..4892b98
--- /dev/null
+++ b/roles/cli-utils/templates/gitconfig.j2
@@ -0,0 +1,13 @@
+[user]
+    email = {{ cliutils.git.email }}
+    name = {{ cliutils.git.name }}
+    signingkey = {{ cliutils.git.signingkey }}
+[commit]
+    gpgsign = true
+[core]
+    autocrlf = input
+    editor = vim
+[format]
+    signoff = true
+[pull]
+    ff = only
diff --git a/roles/cli-utils/templates/inputrc.j2 b/roles/cli-utils/templates/inputrc.j2
new file mode 100644
index 0000000..cb7528e
--- /dev/null
+++ b/roles/cli-utils/templates/inputrc.j2
@@ -0,0 +1 @@
+set mark-symlinked-directories on
diff --git a/roles/cli-utils/templates/tmux.conf.j2 b/roles/cli-utils/templates/tmux.conf.j2
new file mode 100644
index 0000000..b86803d
--- /dev/null
+++ b/roles/cli-utils/templates/tmux.conf.j2
@@ -0,0 +1,25 @@
+unbind r
+bind r source-file ~/.tmux.conf
+
+set -g mouse on
+
+
+# use the vim motion keys to move between panes
+bind h select-pane -L
+bind j select-pane -D
+bind k select-pane -U
+bind l select-pane -R
+
+setw -g mode-keys vi
+bind < resize-pane -L 10
+bind > resize-pane -R 10
+bind - resize-pane -D 10
+bind + resize-pane -U 10
+
+bind-key -T copy-mode-vi 'v' send -X begin-selection;
+bind-key -T copy-mode-vi 'V' send -X select-line;
+bind-key -T copy-mode-vi 'r' send -X rectangle-toggle;
+bind-key -T copy-mode-vi 'y' send -X copy-pipe-and-cancel 'xclip -in -selection clipboard'
+
+set -g base-index 1
+set -g status-bg colour41
diff --git a/roles/communication/tasks/main.yml b/roles/communication/tasks/main.yml
new file mode 100644
index 0000000..514a66a
--- /dev/null
+++ b/roles/communication/tasks/main.yml
@@ -0,0 +1,40 @@
+---
+- name: Queries package manager for communication installation
+  package:
+    name:
+      - discord
+      - element-desktop
+      - evolution
+      - gnome-keyring
+      - gnome-themes-extra
+      - lxappearance
+      - seahorse
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+
+- name: Create lxappearance directory hierarchy
+  file:
+    path: '{{ item }}'
+    state: directory
+  with_items:
+    - '.config/gtk-3.0/'
+    - '.icons/default/'
+
+- name: Enable dark mode for evolution
+  template:
+    src: '{{ item.src }}'
+    dest: '{{ item.dest }}'
+  with_items:
+    - { src: 'gtkrc.j2', dest: '.gtkrc-2.0' }
+    - { src: 'settings.ini.j2', dest: '.config/gtk-3.0/settings.ini' }
+    - { src: 'index.theme.j2', dest: '.icons/default/index.theme'}
+
+- name: Create evolution config and cache parent directories
+  file:
+    path: '{{ item }}'
+    state: directory
+  with_items:
+    - '.config/'
+    - '.local/share/'
diff --git a/roles/communication/templates/gtkrc.j2 b/roles/communication/templates/gtkrc.j2
new file mode 100644
index 0000000..893114a
--- /dev/null
+++ b/roles/communication/templates/gtkrc.j2
@@ -0,0 +1,19 @@
+# DO NOT EDIT! This file will be overwritten by LXAppearance.
+# Any customization should be done in ~/.gtkrc-2.0.mine instead.
+
+include "/home/ynerant/.gtkrc-2.0.mine"
+gtk-theme-name="Adwaita-dark"
+gtk-icon-theme-name="Adwaita"
+gtk-font-name="Monospace 8"
+gtk-cursor-theme-name="Adwaita"
+gtk-cursor-theme-size=0
+gtk-toolbar-style=GTK_TOOLBAR_TEXT
+gtk-toolbar-icon-size=GTK_ICON_SIZE_SMALL_TOOLBAR
+gtk-button-images=0
+gtk-menu-images=0
+gtk-enable-event-sounds=0
+gtk-enable-input-feedback-sounds=0
+gtk-xft-antialias=1
+gtk-xft-hinting=0
+gtk-xft-hintstyle="hintnone"
+gtk-xft-rgba="none"
diff --git a/roles/communication/templates/index.theme.j2 b/roles/communication/templates/index.theme.j2
new file mode 100644
index 0000000..0deb7dc
--- /dev/null
+++ b/roles/communication/templates/index.theme.j2
@@ -0,0 +1,4 @@
+[Icon Theme]
+Name=Default
+Comment=Default Cursor Theme
+Inherits=Adwaita
diff --git a/roles/communication/templates/settings.ini.j2 b/roles/communication/templates/settings.ini.j2
new file mode 100644
index 0000000..c574c0b
--- /dev/null
+++ b/roles/communication/templates/settings.ini.j2
@@ -0,0 +1,16 @@
+[Settings]
+gtk-theme-name=Adwaita-dark
+gtk-icon-theme-name=Adwaita
+gtk-font-name=Monospace 8
+gtk-cursor-theme-name=Adwaita
+gtk-cursor-theme-size=0
+gtk-toolbar-style=GTK_TOOLBAR_TEXT
+gtk-toolbar-icon-size=GTK_ICON_SIZE_SMALL_TOOLBAR
+gtk-button-images=0
+gtk-menu-images=0
+gtk-enable-event-sounds=0
+gtk-enable-input-feedback-sounds=0
+gtk-xft-antialias=1
+gtk-xft-hinting=0
+gtk-xft-hintstyle=hintnone
+gtk-xft-rgba=none
diff --git a/roles/i3/tasks/main.yml b/roles/i3/tasks/main.yml
new file mode 100644
index 0000000..9fef0f1
--- /dev/null
+++ b/roles/i3/tasks/main.yml
@@ -0,0 +1,28 @@
+---
+
+- name: Queries package manager for graphical instalation
+  package:
+    name:
+      - i3-wm
+      - i3blocks
+      - i3status
+  register: pkg_result
+  become: yes
+  retries: 3
+  until: pkg_result is succeeded
+
+- name: Create i3 configuration folder hierarchy
+  file:
+    path: '.config/{{ item }}'
+    state: directory
+  with_items:
+    - i3/
+    - i3status/
+
+- name: Copy i3 configuration files
+  template:
+    src: '{{ item }}.j2'
+    dest: '.config/{{ item }}/config'
+  with_items:
+    - i3
+    - i3status
diff --git a/roles/i3/templates/i3.j2 b/roles/i3/templates/i3.j2
new file mode 100644
index 0000000..0bed3c5
--- /dev/null
+++ b/roles/i3/templates/i3.j2
@@ -0,0 +1,230 @@
+# This file has been auto-generated by i3-config-wizard(1).
+# It will not be overwritten, so edit it as you like.
+#
+# Should you change your keyboard layout some time, delete
+# this file and re-run i3-config-wizard(1).
+#
+
+# i3 config file (v4)
+#
+# Please see https://i3wm.org/docs/userguide.html for a complete reference!
+
+
+exec /home/ynerant/.fehbg
+exec dunst
+exec nm-applet
+exec battery
+exec mpd
+exec mpd_reader
+{% if laptop.numpad %}
+exec numlockx
+{% endif %}
+
+set $mod Mod4
+set $refresh killall -SIGUSR1 i3status
+floating_modifier $mod
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+font pango:monospace 8
+
+# Center window title and remove edges from windows
+title_align center
+hide_edge_borders both
+
+# Bindings for volume and light
+bindsym XF86MonBrightnessDown exec light -U 10
+bindsym XF86MonBrightnessUp exec light -A 10
+bindsym XF86AudioRaiseVolume exec volume -A 5 && $refresh
+bindsym XF86AudioLowerVolume exec volume -U 5 && $refresh
+bindsym Shift+XF86MonBrightnessDown exec light -U 1
+bindsym Shift+XF86MonBrightnessUp exec light -A 1
+bindsym Shift+XF86AudioRaiseVolume exec volume -A 1 && $refresh
+bindsym Shift+XF86AudioLowerVolume exec volume -U 1 && $refresh
+bindsym XF86AudioMute exec volume -T && $refresh
+
+{% if not laptop.numpad %}
+# Binding for mpd
+bindsym KP_Add exec mpc next && $refresh
+bindsym KP_Subtract exec mpc prev && $refresh
+bindsym KP_Multiply exec mpc toggle && $refresh
+bindsym $mod+F3 exec mpc volume +5
+bindsym $mod+F2 exec mpc volume -5
+{% endif %}
+
+# Binding to toggle mouse tapping
+bindsym XF86TouchpadToggle exec mouse_tap toggle
+
+# start a terminal
+bindsym $mod+Return exec xfce4-terminal -x tmux
+bindsym $mod+Shift+Return exec xfce4-terminal
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym $mod+d exec dmenu_run -l 1 -p '[ ynerant@morgoth ~ ]'
+bindsym XF86Search exec dmenu_run -l 1
+
+# Screenshots
+bindsym Print exec scrot 'Pictures/Screenshots/%Y-%m-%d-%s.jpg'
+bindsym --release Shift+Print exec scrot -s "Pictures/Screenshots/$(ls Pictures/Screenshots/ | dmenu)"
+
+
+# Binding to lock screen
+bindsym $mod+Escape exec physlock
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+h focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+bindsym $mod+l focus right
+
+# Move through output
+bindsym $mod+j focus output down
+bindsym $mod+k focus output up
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+h move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+bindsym $mod+Shift+l move right
+
+# Move workspace between output
+bindsym $mod+Shift+j move workspace to output down
+bindsym $mod+Shift+k move workspace to output up
+
+# split in horizontal orientation
+bindsym $mod+s split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+bindsym $mod+y focus child
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws0 "0"
+set $ws1 "1"
+set $ws2 "2"
+set $ws3 "3"
+set $ws4 "4"
+set $ws5 "5"
+set $ws6 "6"
+set $ws7 "7"
+set $ws8 "8"
+set $ws9 "9"
+set $ws10 "10"
+
+# Screen workspace
+workspace $ws0 output eDP-1
+workspace $ws1 output eDP-1
+workspace $ws2 output eDP-1
+workspace $ws3 output eDP-1
+workspace $ws4 output eDP-1
+workspace $ws5 output eDP-1
+workspace $ws6 output eDP-1
+workspace $ws7 output eDP-1
+workspace $ws8 output eDP-1
+workspace $ws9 output eDP-1
+workspace $ws10 output eDP-1
+
+# switch to workspace
+bindsym $mod+0xb2 workspace $ws0
+bindsym $mod+1 workspace $ws1
+bindsym $mod+2 workspace $ws2
+bindsym $mod+3 workspace $ws3
+bindsym $mod+4 workspace $ws4
+bindsym $mod+5 workspace $ws5
+bindsym $mod+6 workspace $ws6
+bindsym $mod+7 workspace $ws7
+bindsym $mod+8 workspace $ws8
+bindsym $mod+9 workspace $ws9
+bindsym $mod+0 workspace $ws10
+
+# move focused container to workspace
+bindsym $mod+Shift+0xb2 move container to workspace $ws0
+bindsym $mod+Shift+1 move container to workspace $ws1
+bindsym $mod+Shift+2 move container to workspace $ws2
+bindsym $mod+Shift+3 move container to workspace $ws3
+bindsym $mod+Shift+4 move container to workspace $ws4
+bindsym $mod+Shift+5 move container to workspace $ws5
+bindsym $mod+Shift+6 move container to workspace $ws6
+bindsym $mod+Shift+7 move container to workspace $ws7
+bindsym $mod+Shift+8 move container to workspace $ws8
+bindsym $mod+Shift+9 move container to workspace $ws9
+bindsym $mod+Shift+0 move container to workspace $ws10
+
+# Leave fullscreen on new window
+popup_during_fullscreen leave_fullscreen
+
+# Cycle through workspace
+bindsym $mod+Tab workspace next_on_output
+bindsym $mod+Shift+Tab workspace prev_on_output
+
+# Dont focus discord (for thunderbird passwd)
+no_focus [class="(?i)discord"]
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+e exec "i3-msg exit"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+  bindsym Left resize shrink width 1 px or 1 ppt
+  bindsym Down resize grow height 1 px or 1 ppt
+  bindsym Up resize shrink height 1 px or 1 ppt
+  bindsym Right resize grow width 1 px or 1 ppt
+
+  # back to normal: Enter or Escape or $mod+r
+  bindsym Return mode "default"
+  bindsym Escape mode "default"
+  bindsym $mod+r mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# Window thickness
+new_window 1pixel
+
+# Toogle bar-1 visibility
+bindsym $mod+x bar mode invisible bar-1
+bindsym $mod+Shift+x bar mode toggle bar-1
+
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+  output eDP-1
+  tray_output eDP-1
+  mode hide
+  status_command i3status
+  strip_workspace_numbers yes
+}
+
+bar {
+  output HDMI-2
+  mode hide
+  status_command i3status
+  strip_workspace_numbers yes
+}
diff --git a/roles/i3/templates/i3status.j2 b/roles/i3/templates/i3status.j2
new file mode 100644
index 0000000..c6d2eb4
--- /dev/null
+++ b/roles/i3/templates/i3status.j2
@@ -0,0 +1,61 @@
+# i3status configuration file.
+# see "man i3status" for documentation.
+
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# ß
+# If the above line is not correctly displayed, fix your editor first!
+
+general {
+  output_format="i3bar"
+  colors = true
+  interval = 1
+}
+
+# order += "ipv6"
+order += "read_file mpd"
+order += "volume master"
+order+= "ipv6"
+order += "wireless _first_"
+order += "ethernet _first_"
+order += "battery all"
+order += "tztime local"
+
+
+ipv6 {
+ format_up = "IPV6"
+ format_down = ""
+}
+
+wireless _first_ {
+  format_up = "W:%essid"
+  format_down = ""
+}
+
+ethernet _first_ {
+  format_up = "E: %speed"
+  format_down = ""
+}
+
+battery all {
+  format = "%status %percentage %remaining"
+  last_full_capacity = true
+  color_good="#00FFFF"
+  color_bad="#00FFFF"
+}
+
+tztime local {
+  format = "%d-%m %H:%M"
+}
+
+volume master {
+  format = "♪: %volume"
+  format_muted = "♪: muted (%volume)"
+  device = "pulse"
+}
+
+read_file mpd {
+  path = "/tmp/mpd.current"
+  color_good = "#00FF99"
+  format_bad = ""
+}
diff --git a/roles/mime/tasks/main.yml b/roles/mime/tasks/main.yml
new file mode 100644
index 0000000..05e93cc
--- /dev/null
+++ b/roles/mime/tasks/main.yml
@@ -0,0 +1,19 @@
+---
+
+- name: Queries package manager to install xdg
+  package:
+    name: xdg-utils
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+
+- name: Create default applications config folder
+  file:
+    path: '.config/'
+    state: directory
+
+- name: Install default applications configuration file
+  template:
+    src: 'mimeapps.list.j2'
+    dest: '.config/mimeapps.list'
diff --git a/roles/mime/templates/mimeapps.list.j2 b/roles/mime/templates/mimeapps.list.j2
new file mode 100644
index 0000000..4162bd9
--- /dev/null
+++ b/roles/mime/templates/mimeapps.list.j2
@@ -0,0 +1,17 @@
+
+[Default Applications]
+text/html=firefox.desktop
+x-scheme-handler/http=firefox.desktop
+x-scheme-handler/https=firefox.desktop
+x-scheme-handler/ftp=firefox.desktop
+x-scheme-handler/about=firefox.desktop
+x-scheme-handler/unknown=firefox.desktop
+application/x-extension-htm=firefox.desktop
+application/x-extension-html=firefox.desktop
+application/x-extension-shtml=firefox.desktop
+application/xhtml+xml=firefox.desktop
+application/x-extension-xhtml=firefox.desktop
+application/x-extension-xht=firefox.desktop
+application/pdf=org.pwmt.zathura.desktop
+
+
diff --git a/roles/multimedia/tasks/main.yml b/roles/multimedia/tasks/main.yml
new file mode 100644
index 0000000..12c4abe
--- /dev/null
+++ b/roles/multimedia/tasks/main.yml
@@ -0,0 +1,30 @@
+---
+
+- name: Queries package manager for multimedia installation
+  package:
+    name:
+      - feh
+      - mpv
+      - vlc
+      - zathura
+      - zathura-pdf-poppler
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+
+- name: Create multimedia folder hierarchy
+  file:
+    path: '.config/{{ item }}'
+    state: directory
+  with_items :
+    - 'mpv/'
+    - 'zathura/'
+
+- name: Copy multimedia configuration files
+  template:
+    src: '{{ item.src }}'
+    dest: '.config/{{ item.dest }}'
+  with_items:
+    - { src: 'zathurarc.j2', dest: 'zathura/zathurarc' }
+    - { src: 'mpv.conf.j2', dest: 'mpv/mpv.conf' }
diff --git a/roles/multimedia/templates/mpv.conf.j2 b/roles/multimedia/templates/mpv.conf.j2
new file mode 100644
index 0000000..916ac39
--- /dev/null
+++ b/roles/multimedia/templates/mpv.conf.j2
@@ -0,0 +1,28 @@
+##################
+# video settings #
+##################
+
+# force starting with centered window
+geometry=50%:50%
+
+# no window title bar
+no-border
+
+##################
+# audio settings #
+##################
+
+# Specify pulse audio as audio output
+ao=pulse
+
+##################
+# other settings #
+##################
+
+# Display English subtitles if available.
+slang=fr,en
+
+# Play Finnish audio if available, fall back to English otherwise.
+alang=fr,en
+
+force-window=yes
diff --git a/roles/multimedia/templates/zathurarc.j2 b/roles/multimedia/templates/zathurarc.j2
new file mode 100644
index 0000000..613ded3
--- /dev/null
+++ b/roles/multimedia/templates/zathurarc.j2
@@ -0,0 +1,3 @@
+set selection-clipboard clipboard
+set recolor true
+set recolor-lightcolor "#121212"
diff --git a/roles/navigateur/tasks/main.yml b/roles/navigateur/tasks/main.yml
new file mode 100644
index 0000000..d9d68c9
--- /dev/null
+++ b/roles/navigateur/tasks/main.yml
@@ -0,0 +1,9 @@
+---
+- name: Queries package manager for browser installation
+  package:
+    name:
+      - firefox
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
diff --git a/roles/notification/tasks/main.yml b/roles/notification/tasks/main.yml
new file mode 100644
index 0000000..b96ae58
--- /dev/null
+++ b/roles/notification/tasks/main.yml
@@ -0,0 +1,24 @@
+---
+
+- name: Queries package manager for notification installation
+  package:
+    name:
+      - dunst
+      - gnome-icon-theme
+      - gnome-icon-theme-extras
+      - gnome-icon-theme-symbolic
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+
+- name: Create dunst config directory
+  file:
+    path: '.config/dunst/'
+    state: directory
+
+- name: Copy dunst configuration file
+  template:
+    src: 'dunstrc.j2'
+    dest: '.config/dunst/dunstrc'
+
diff --git a/roles/notification/templates/dunstrc.j2 b/roles/notification/templates/dunstrc.j2
new file mode 100644
index 0000000..0ac74be
--- /dev/null
+++ b/roles/notification/templates/dunstrc.j2
@@ -0,0 +1,292 @@
+[global]
+    ### Display ###
+
+    # Which monitor should the notifications be displayed on.
+    monitor = 0
+
+    # Display notification on focused monitor.  Possible modes are:
+    #   mouse: follow mouse pointer
+    #   keyboard: follow window with keyboard focus
+    #   none: don't follow anything
+    #
+    # "keyboard" needs a window manager that exports the
+    # _NET_ACTIVE_WINDOW property.
+    # This should be the case for almost all modern window managers.
+    #
+    # If this option is set to mouse or keyboard, the monitor option
+    # will be ignored.
+    follow = none
+
+    # The geometry of the window:
+    #   [{width}]x{height}[+/-{x}+/-{y}]
+    # The geometry of the message window.
+    # The height is measured in number of notifications everything else
+    # in pixels.  If the width is omitted but the height is given
+    # ("-geometry x2"), the message window expands over the whole screen
+    # (dmenu-like).  If width is 0, the window expands to the longest
+    # message displayed.  A positive x is measured from the left, a
+    # negative from the right side of the screen.  Y is measured from
+    # the top and down respectively.
+    # The width can be negative.  In this case the actual width is the
+    # screen width minus the width defined in within the geometry option.
+    geometry = "300x5-30+20"
+
+    # Show how many messages are currently hidden (because of geometry).
+    indicate_hidden = yes
+
+    # Shrink window if it's smaller than the width.  Will be ignored if
+    # width is 0.
+    shrink = no
+
+    # The transparency of the window.  Range: [0; 100].
+    # This option will only work if a compositing window manager is
+    # present (e.g. xcompmgr, compiz, etc.).
+    transparency = 0
+
+    # The height of the entire notification.  If the height is smaller
+    # than the font height and padding combined, it will be raised
+    # to the font height and padding.
+    notification_height = 0
+
+    # Draw a line of "separator_height" pixel height between two
+    # notifications.
+    # Set to 0 to disable.
+    separator_height = 2
+
+    # Padding between text and separator.
+    padding = 8
+
+    # Horizontal padding.
+    horizontal_padding = 8
+
+    # Defines width in pixels of frame around the notification window.
+    # Set to 0 to disable.
+    frame_width = 3
+
+    # Defines color of the frame around the notification window.
+    frame_color = "#aaaaaa"
+
+    # Define a color for the separator.
+    # possible values are:
+    #  * auto: dunst tries to find a color fitting to the background;
+    #  * foreground: use the same color as the foreground;
+    #  * frame: use the same color as the frame;
+    #  * anything else will be interpreted as a X color.
+    separator_color = frame
+
+    # Sort messages by urgency.
+    sort = yes
+
+    # Don't remove messages, if the user is idle (no mouse or keyboard input)
+    # for longer than idle_threshold seconds.
+    # Set to 0 to disable.
+    # A client can set the 'transient' hint to bypass this. See the rules
+    # section for how to disable this if necessary
+    idle_threshold = 120
+
+    ### Text ###
+
+    font = Monospace 9
+
+    # The spacing between lines.  If the height is smaller than the
+    # font height, it will get raised to the font height.
+    line_height = 0
+
+    # Possible values are:
+    # full: Allow a small subset of html markup in notifications:
+    #        bold
+    #        italic
+    #        strikethrough
+    #        underline
+    #
+    #        For a complete reference see
+    #        .
+    #
+    # strip: This setting is provided for compatibility with some broken
+    #        clients that send markup even though it's not enabled on the
+    #        server. Dunst will try to strip the markup but the parsing is
+    #        simplistic so using this option outside of matching rules for
+    #        specific applications *IS GREATLY DISCOURAGED*.
+    #
+    # no:    Disable markup parsing, incoming notifications will be treated as
+    #        plain text. Dunst will not advertise that it has the body-markup
+    #        capability if this is set as a global setting.
+    #
+    # It's important to note that markup inside the format option will be parsed
+    # regardless of what this is set to.
+    markup = full
+
+    # The format of the message.  Possible variables are:
+    #   %a  appname
+    #   %s  summary
+    #   %b  body
+    #   %i  iconname (including its path)
+    #   %I  iconname (without its path)
+    #   %p  progress value if set ([  0%] to [100%]) or nothing
+    #   %n  progress value if set without any extra characters
+    #   %%  Literal %
+    # Markup is allowed
+    format = "%s\n%b"
+
+    # Alignment of message text.
+    # Possible values are "left", "center" and "right".
+    alignment = left
+
+    # Show age of message if message is older than show_age_threshold
+    # seconds.
+    # Set to -1 to disable.
+    show_age_threshold = 60
+
+    # Split notifications into multiple lines if they don't fit into
+    # geometry.
+    word_wrap = yes
+
+    # When word_wrap is set to no, specify where to make an ellipsis in long lines.
+    # Possible values are "start", "middle" and "end".
+    ellipsize = middle
+
+    # Ignore newlines '\n' in notifications.
+    ignore_newline = no
+
+    # Stack together notifications with the same content
+    stack_duplicates = true
+
+    # Hide the count of stacked notifications with the same content
+    hide_duplicate_count = false
+
+    # Display indicators for URLs (U) and actions (A).
+    show_indicators = yes
+
+    ### Icons ###
+
+    # Align icons left/right/off
+    icon_position = left
+
+    # Scale larger icons down to this size, set to 0 to disable
+    max_icon_size = 32
+
+    # Paths to default icons.
+    icon_path = /usr/share/icons/gnome/32x32/status/:/usr/share/icons/gnome/32x32/devices/
+
+    ### History ###
+
+    # Should a notification popped up from history be sticky or timeout
+    # as if it would normally do.
+    sticky_history = yes
+
+    # Maximum amount of notifications kept in history
+    history_length = 20
+
+    ### Misc/Advanced ###
+
+    # dmenu path.
+    dmenu = /usr/bin/dmenu -p dunst:
+
+    # Browser for opening urls in context menu.
+    browser = /usr/bin/firefox -new-tab
+
+    # Always run rule-defined scripts, even if the notification is suppressed
+    always_run_script = true
+
+    # Define the title of the windows spawned by dunst
+    title = Dunst
+
+    # Define the class of the windows spawned by dunst
+    class = Dunst
+
+    # Print a notification on startup.
+    # This is mainly for error detection, since dbus (re-)starts dunst
+    # automatically after a crash.
+    startup_notification = false
+
+    # Manage dunst's desire for talking
+    # Can be one of the following values:
+    #  crit: Critical features. Dunst aborts
+    #  warn: Only non-fatal warnings
+    #  mesg: Important Messages
+    #  info: all unimportant stuff
+    # debug: all less than unimportant stuff
+    verbosity = mesg
+
+    # Define the corner radius of the notification window
+    # in pixel size. If the radius is 0, you have no rounded
+    # corners.
+    # The radius will be automatically lowered if it exceeds half of the
+    # notification height to avoid clipping text and/or icons.
+    corner_radius = 0
+
+    ### Legacy
+
+    # Use the Xinerama extension instead of RandR for multi-monitor support.
+    # This setting is provided for compatibility with older nVidia drivers that
+    # do not support RandR and using it on systems that support RandR is highly
+    # discouraged.
+    #
+    # By enabling this setting dunst will not be able to detect when a monitor
+    # is connected or disconnected which might break follow mode if the screen
+    # layout changes.
+    force_xinerama = false
+
+    ### mouse
+
+    # Defines action of mouse event
+    # Possible values are:
+    # * none: Don't do anything.
+    # * do_action: If the notification has exactly one action, or one is marked as default,
+    #              invoke it. If there are multiple and no default, open the context menu.
+    # * close_current: Close current notification.
+    # * close_all: Close all notifications.
+    mouse_left_click = close_current
+    mouse_middle_click = do_action
+    mouse_right_click = close_all
+
+# Experimental features that may or may not work correctly. Do not expect them
+# to have a consistent behaviour across releases.
+[experimental]
+    # Calculate the dpi to use on a per-monitor basis.
+    # If this setting is enabled the Xft.dpi value will be ignored and instead
+    # dunst will attempt to calculate an appropriate dpi value for each monitor
+    # using the resolution and physical size. This might be useful in setups
+    # where there are multiple screens with very different dpi values.
+    per_monitor_dpi = false
+
+[shortcuts]
+
+    # Shortcuts are specified as [modifier+][modifier+]...key
+    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
+    # "mod3" and "mod4" (windows-key).
+    # Xev might be helpful to find names for keys.
+
+    # Close notification.
+    close = ctrl+space
+
+    # Close all notifications.
+    close_all = ctrl+shift+space
+
+    # Context menu.
+    context = ctrl+shift+period
+
+[urgency_low]
+    # IMPORTANT: colors have to be defined in quotation marks.
+    # Otherwise the "#" and following would be interpreted as a comment.
+    background = "#222222"
+    foreground = "#888888"
+    timeout = 10
+    # Icon for notifications with low urgency, uncomment to enable
+    #icon = /path/to/icon
+
+[urgency_normal]
+    background = "#0091FF"
+    foreground = "#ffffff"
+    timeout = 10
+    # Icon for notifications with normal urgency, uncomment to enable
+    #icon = /path/to/icon
+
+[urgency_critical]
+    background = "#900000"
+    foreground = "#ffffff"
+    frame_color = "#ff0000"
+    timeout = 0
+    # Icon for notifications with critical urgency, uncomment to enable
+    #icon = /path/to/icon
+
diff --git a/roles/ntp/handlers/main.yml b/roles/ntp/handlers/main.yml
new file mode 100644
index 0000000..c3d9f78
--- /dev/null
+++ b/roles/ntp/handlers/main.yml
@@ -0,0 +1,7 @@
+---
+
+- name: restart ntpd.service
+  service:
+    name: ntpd
+    state: restarted
+  become: true
diff --git a/roles/ntp/tasks/main.yml b/roles/ntp/tasks/main.yml
new file mode 100644
index 0000000..79373a6
--- /dev/null
+++ b/roles/ntp/tasks/main.yml
@@ -0,0 +1,23 @@
+---
+
+- name: Queries package manager for ntp installation
+  package:
+    name: ntp
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+  notify: restart ntpd.service
+
+- name: Deploy ntp configuration
+  template:
+    src: 'ntp.conf.j2'
+    dest: '/etc/ntp.conf'
+  become: yes
+  notify: restart ntpd.service
+
+- name: Enable ntp service
+  service:
+    name: ntpd
+    enabled: yes
+  become: true
diff --git a/roles/ntp/templates/ntp.conf.j2 b/roles/ntp/templates/ntp.conf.j2
new file mode 100644
index 0000000..5250c80
--- /dev/null
+++ b/roles/ntp/templates/ntp.conf.j2
@@ -0,0 +1,25 @@
+# Please consider joining the pool:
+#
+#     http://www.pool.ntp.org/join.html
+#
+# For additional information see:
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - the ntp.conf man page
+
+# Associate to Arch's NTP pool
+server charybde.crans.org
+server 0.fr.pool.ntp.org
+server 1.fr.pool.ntp.org
+server 2.fr.pool.ntp.org
+server 3.fr.pool.ntp.org
+
+# By default, the server allows:
+# - all queries from the local host
+# - only time queries from remote hosts, protected by rate limiting and kod
+restrict default kod limited nomodify nopeer noquery notrap
+restrict 127.0.0.1
+restrict ::1
+
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift
diff --git a/roles/pass/tasks/main.yml b/roles/pass/tasks/main.yml
new file mode 100644
index 0000000..ef12ca6
--- /dev/null
+++ b/roles/pass/tasks/main.yml
@@ -0,0 +1,16 @@
+---
+
+- name: Queries package manager to install pass
+  package:
+    name:
+      - pass
+      - git
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+
+- name: Clone git pass repository
+  git:
+    repo: '{{ pass.upstream }}'
+    dest: '{{ pass.dest }}'
diff --git a/roles/scripts/tasks/main.yml b/roles/scripts/tasks/main.yml
new file mode 100644
index 0000000..3c157b3
--- /dev/null
+++ b/roles/scripts/tasks/main.yml
@@ -0,0 +1,30 @@
+---
+- name: Queries package manager for graphical instalation
+  package:
+    name:
+      - scrot
+      - network-manager-applet
+      - acpi
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+
+- name: Clone scripts git repo
+  git:
+    repo: '{{ scripts.git }}'
+    dest: '.local/src/scripts'
+
+- name: Find scripts
+  find:
+    path: '.local/src/scripts'
+    pattern: "*"
+  register: scripts
+
+- name: Link scripts
+  file:
+    src: '/home/{{ user.name }}/{{ item.path }}'
+    dest: '.local/bin/{{ item.path | basename }}'
+    state: link
+    force: yes
+  with_items: '{{ scripts.files }}'
diff --git a/roles/ssh/tasks/main.yml b/roles/ssh/tasks/main.yml
new file mode 100644
index 0000000..10dcc68
--- /dev/null
+++ b/roles/ssh/tasks/main.yml
@@ -0,0 +1,28 @@
+---
+
+- name: Create ssh directory
+  file:
+    path: '.ssh'
+    mode: 0700
+    state: directory
+
+- name: Create ssh configuration file directory
+  file:
+    path: '.ssh/config.d'
+    mode: 0755
+    state: directory
+
+- name: Deploying config files
+  template:
+    src: 'config.d/{{ item }}.j2'
+    dest: '.ssh/config.d/{{ item }}'
+  loop:
+    - aurore
+    - crans
+    - dptinfo
+    - perso
+
+- name: Include config files
+  template:
+    src: 'config.j2'
+    dest: '.ssh/config'
diff --git a/roles/ssh/templates/config.d/aurore.j2 b/roles/ssh/templates/config.d/aurore.j2
new file mode 100644
index 0000000..a08b55a
--- /dev/null
+++ b/roles/ssh/templates/config.d/aurore.j2
@@ -0,0 +1,3 @@
+Host *.adm.auro.re
+    User ynerant
+    ProxyJump camelot.auro.re
diff --git a/roles/ssh/templates/config.d/crans.j2 b/roles/ssh/templates/config.d/crans.j2
new file mode 100644
index 0000000..fe9c7c3
--- /dev/null
+++ b/roles/ssh/templates/config.d/crans.j2
@@ -0,0 +1,13 @@
+Host freebox.crans.org titanic.adm.crans.org soyouz.crans.org ssh.crans.org zamok.crans.org zamok.adm.crans.org *.adh.crans.org note*.crans.org
+    User ynerant
+
+Host odlyd.crans.org odlyd 10.231.136.4
+    User ynerant
+    Hostname 10.231.136.4
+    ProxyJump zamok.crans.org
+
+Host 172.16.10.* 185.230.79.* *.adm.crans.org *.crans.org
+    User _ynerant
+
+Host 172.16.10.* *.adm.crans.org *.crans.org ynerant.fr !hodaur.crans.org !odlyd.crans.org !note*.crans.org
+    ProxyJump hodaur.crans.org
diff --git a/roles/ssh/templates/config.d/dptinfo.j2 b/roles/ssh/templates/config.d/dptinfo.j2
new file mode 100644
index 0000000..98a2255
--- /dev/null
+++ b/roles/ssh/templates/config.d/dptinfo.j2
@@ -0,0 +1,6 @@
+Host *.dptinfo.ens-cachan.fr !ssh.dptinfo.ens-cachan.fr
+    User danello
+    ProxyJump ssh.dptinfo.ens-cachan.fr
+
+Host ssh.dptinfo.ens-cachan.fr
+    User danello
diff --git a/roles/ssh/templates/config.d/perso.j2 b/roles/ssh/templates/config.d/perso.j2
new file mode 100644
index 0000000..029a5cf
--- /dev/null
+++ b/roles/ssh/templates/config.d/perso.j2
@@ -0,0 +1,4 @@
+Host main
+    User ynerant
+    Hostname ynerant-pc.fil.sand.auro.re
+    ProxyJump camelot.auro.re
diff --git a/roles/ssh/templates/config.j2 b/roles/ssh/templates/config.j2
new file mode 100644
index 0000000..82782ad
--- /dev/null
+++ b/roles/ssh/templates/config.j2
@@ -0,0 +1 @@
+Include ~/.ssh/config.d/*
diff --git a/roles/sudo/tasks/main.yml b/roles/sudo/tasks/main.yml
new file mode 100644
index 0000000..be945fe
--- /dev/null
+++ b/roles/sudo/tasks/main.yml
@@ -0,0 +1,12 @@
+---
+
+- name: Deploy sudoers configuration files
+  template:
+    src: '{{ item.src }}.j2'
+    dest: '/etc/{{ item.src }}'
+    mode: '{{ item.mode }}'
+  with_items:
+    - { src: 'sudoers', mode: '0440' }
+    - { src: 'sudoers.lecture', mode: '0644' }
+  become: yes
+
diff --git a/roles/sudo/templates/sudoers.j2 b/roles/sudo/templates/sudoers.j2
new file mode 100644
index 0000000..61ead50
--- /dev/null
+++ b/roles/sudo/templates/sudoers.j2
@@ -0,0 +1,101 @@
+## sudoers file.
+##
+## This file MUST be edited with the 'visudo' command as root.
+## Failure to use 'visudo' may result in syntax or file permission errors
+## that prevent sudo from running.
+##
+## See the sudoers man page for the details on how to write a sudoers file.
+##
+
+##
+## Host alias specification
+##
+## Groups of machines. These may include host names (optionally with wildcards),
+## IP addresses, network numbers or netgroups.
+# Host_Alias	WEBSERVERS = www1, www2, www3
+
+##
+## User alias specification
+##
+## Groups of users.  These may consist of user names, uids, Unix groups,
+## or netgroups.
+# User_Alias	ADMINS = millert, dowdy, mikef
+
+##
+## Cmnd alias specification
+##
+## Groups of commands.  Often used to group related commands together.
+# Cmnd_Alias	PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
+# 			    /usr/bin/pkill, /usr/bin/top
+# Cmnd_Alias	REBOOT = /sbin/halt, /sbin/reboot, /sbin/poweroff
+
+##
+## Defaults specification
+##
+## You may wish to keep some of the following environment variables
+## when running commands via sudo.
+##
+## Locale settings
+# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
+##
+## Run X applications through sudo; HOME is used to find the
+## .Xauthority file.  Note that other programs use HOME to find   
+## configuration files and this may lead to privilege escalation!
+# Defaults env_keep += "HOME"
+##
+## X11 resource path settings
+# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
+##
+## Desktop path settings
+# Defaults env_keep += "QTDIR KDEDIR"
+##
+## Allow sudo-run commands to inherit the callers' ConsoleKit session
+# Defaults env_keep += "XDG_SESSION_COOKIE"
+##
+## Uncomment to enable special input methods.  Care should be taken as
+## this may allow users to subvert the command being run via sudo.
+# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
+##
+## Uncomment to use a hard-coded PATH instead of the user's to find commands
+# Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+##
+## Uncomment to send mail if the user does not enter the correct password.
+# Defaults mail_badpass
+##
+## Uncomment to enable logging of a command's output, except for
+## sudoreplay and reboot.  Use sudoreplay to play back logged sessions.
+# Defaults log_output
+# Defaults!/usr/bin/sudoreplay !log_output
+# Defaults!/usr/local/bin/sudoreplay !log_output
+# Defaults!REBOOT !log_output
+
+##
+## Runas alias specification
+##
+
+##
+## User privilege specification
+##
+root ALL=(ALL) ALL
+
+## Uncomment to allow members of group wheel to execute any command
+%wheel ALL=(ALL) ALL
+
+## Same thing without a password
+# %wheel ALL=(ALL) NOPASSWD: ALL
+
+## Uncomment to allow members of group sudo to execute any command
+# %sudo	ALL=(ALL) ALL
+
+## Uncomment to allow any user to run sudo if they know the password
+## of the user they are running the command as (root by default).
+# Defaults targetpw  # Ask for the password of the target user
+# ALL ALL=(ALL) ALL  # WARNING: only use this together with 'Defaults targetpw'
+
+Defaults lecture=always
+Defaults lecture_file=/etc/sudoers.lecture
+# toilet -f future --rainbow 'BE NICE' > sudoers.lecture.j2
+
+## Read drop-in files from /etc/sudoers.d
+## (the '#' here does not indicate a comment)
+#includedir /etc/sudoers.d
diff --git a/roles/sudo/templates/sudoers.lecture.j2 b/roles/sudo/templates/sudoers.lecture.j2
new file mode 100644
index 0000000..51cb23b
--- /dev/null
+++ b/roles/sudo/templates/sudoers.lecture.j2
@@ -0,0 +1,3 @@
+┏┓ ┏━╸   ┏┓╻╻┏━╸┏━╸
+┣┻┓┣╸    ┃┗┫┃┃  ┣╸ 
+┗━┛┗━╸   ╹ ╹╹┗━╸┗━╸
diff --git a/roles/systemd/tasks/main.yml b/roles/systemd/tasks/main.yml
new file mode 100644
index 0000000..4a790bd
--- /dev/null
+++ b/roles/systemd/tasks/main.yml
@@ -0,0 +1,19 @@
+---
+
+- name: Deploy logind configuration
+  template:
+    src: 'logind.conf.j2'
+    dest: '/etc/systemd/logind.conf'
+  become: yes
+
+- name: Create autologin directory on tty1
+  file:
+    path: '/etc/systemd/system/getty@tty1.service.d'
+    state: directory
+  become: yes
+
+- name: Copy autologin template file
+  template:
+    src: 'override.conf.j2'
+    dest: '/etc/systemd/system/getty@tty1.service.d/override.conf'
+  become: yes
diff --git a/roles/systemd/templates/logind.conf.j2 b/roles/systemd/templates/logind.conf.j2
new file mode 100644
index 0000000..23f5f9b
--- /dev/null
+++ b/roles/systemd/templates/logind.conf.j2
@@ -0,0 +1,37 @@
+#  This file is part of systemd.
+#
+#  systemd is free software; you can redistribute it and/or modify it
+#  under the terms of the GNU Lesser General Public License as published by
+#  the Free Software Foundation; either version 2.1 of the License, or
+#  (at your option) any later version.
+#
+# Entries in this file show the compile time defaults.
+# You can change settings by editing this file.
+# Defaults can be restored by simply deleting this file.
+#
+# See logind.conf(5) for details.
+
+[Login]
+#NAutoVTs=6
+#ReserveVT=6
+#KillUserProcesses=no
+#KillOnlyUsers=
+#KillExcludeUsers=root
+#InhibitDelayMaxSec=5
+HandlePowerKey=ignore
+#HandleSuspendKey=suspend
+#HandleHibernateKey=hibernate
+#HandleLidSwitch=suspend
+#HandleLidSwitchExternalPower=suspend
+#HandleLidSwitchDocked=ignore
+#PowerKeyIgnoreInhibited=no
+#SuspendKeyIgnoreInhibited=no
+#HibernateKeyIgnoreInhibited=no
+#LidSwitchIgnoreInhibited=yes
+#HoldoffTimeoutSec=30s
+#IdleAction=ignore
+#IdleActionSec=30min
+#RuntimeDirectorySize=10%
+#RemoveIPC=yes
+#InhibitorsMax=8192
+#SessionsMax=8192
diff --git a/roles/systemd/templates/override.conf.j2 b/roles/systemd/templates/override.conf.j2
new file mode 100644
index 0000000..f9781ba
--- /dev/null
+++ b/roles/systemd/templates/override.conf.j2
@@ -0,0 +1,3 @@
+[Service]
+ExecStart=
+ExecStart=-/usr/bin/agetty --autologin {{ user.name }} --noclear %I $TERM
diff --git a/roles/terminal/tasks/main.yml b/roles/terminal/tasks/main.yml
new file mode 100644
index 0000000..6024508
--- /dev/null
+++ b/roles/terminal/tasks/main.yml
@@ -0,0 +1,20 @@
+---
+
+- name: Queries package manager for terminal installation
+  package:
+    name:
+      - xfce4-terminal
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+
+- name: Create xfce4 terminal config directory
+  file:
+    path: '.config/xfce4/terminal/'
+    state: directory
+
+- name: Copy xfce4-terminal configuration file
+  template:
+    src: 'terminalrc.j2'
+    dest: '.config/xfce4/terminal/terminalrc'
diff --git a/roles/terminal/templates/terminalrc.j2 b/roles/terminal/templates/terminalrc.j2
new file mode 100644
index 0000000..31147f6
--- /dev/null
+++ b/roles/terminal/templates/terminalrc.j2
@@ -0,0 +1,35 @@
+[Configuration]
+MiscAlwaysShowTabs=FALSE
+MiscBell=TRUE
+MiscBellUrgent=TRUE
+MiscBordersDefault=FALSE
+MiscCursorBlinks=FALSE
+MiscCursorShape=TERMINAL_CURSOR_SHAPE_BLOCK
+MiscDefaultGeometry=90x24
+MiscInheritGeometry=FALSE
+MiscMenubarDefault=FALSE
+MiscMouseAutohide=TRUE
+MiscMouseWheelZoom=TRUE
+MiscToolbarDefault=FALSE
+MiscConfirmClose=TRUE
+MiscCycleTabs=TRUE
+MiscTabCloseButtons=TRUE
+MiscTabCloseMiddleClick=TRUE
+MiscTabPosition=GTK_POS_TOP
+MiscHighlightUrls=TRUE
+MiscMiddleClickOpensUri=FALSE
+MiscCopyOnSelect=TRUE
+MiscShowRelaunchDialog=TRUE
+MiscRewrapOnResize=TRUE
+MiscUseShiftArrowsToScroll=FALSE
+MiscSlimTabs=TRUE
+MiscNewTabAdjacent=FALSE
+MiscSearchDialogOpacity=100
+MiscShowUnsafePasteDialog=FALSE
+TitleMode=TERMINAL_TITLE_HIDE
+ScrollingBar=TERMINAL_SCROLLBAR_NONE
+FontName=Monospace 8
+ShortcutsNoMnemonics=TRUE
+ShortcutsNoHelpkey=TRUE
+ScrollingOnOutput=FALSE
+
diff --git a/roles/texlive/tasks/main.yml b/roles/texlive/tasks/main.yml
new file mode 100644
index 0000000..8c65514
--- /dev/null
+++ b/roles/texlive/tasks/main.yml
@@ -0,0 +1,9 @@
+---
+
+- name: Queries package manager for texlive most
+  package:
+    name: texlive-most
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
diff --git a/roles/vim/tasks/main.yml b/roles/vim/tasks/main.yml
new file mode 100644
index 0000000..5e97548
--- /dev/null
+++ b/roles/vim/tasks/main.yml
@@ -0,0 +1,16 @@
+---
+
+- name: Queries package manager for vim installation
+  package:
+    name:
+      - vim
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+  when: user.root
+
+- name: Deploying config files
+  template:
+    src: 'vimrc.j2'
+    dest: '.vimrc'
diff --git a/roles/vim/templates/vimrc.j2 b/roles/vim/templates/vimrc.j2
new file mode 100644
index 0000000..e981427
--- /dev/null
+++ b/roles/vim/templates/vimrc.j2
@@ -0,0 +1,46 @@
+if has('autocmd')
+  filetype plugin indent on
+endif
+if has('syntax') && !exists('g:syntax_on')
+  syntax enable
+endif
+
+set viminfo=
+
+set autoindent
+set backspace=indent,eol,start
+set complete-=i
+set smarttab
+set tabstop=2
+set shiftwidth=2
+set expandtab
+
+set laststatus=2
+set ruler
+set showcmd
+set wildmenu
+
+set incsearch
+
+set encoding=utf-8
+
+if &listchars ==# 'eol:$'
+  set listchars=tab:>\ ,trail:-,extends:>,precedes:<,nbsp:+
+endif
+
+set formatoptions+=j
+
+set autoread
+
+if &tabpagemax < 50
+  set tabpagemax=50
+endif
+
+set whichwrap+=<,>,h,l,[,]
+
+
+colorscheme elflord
+highlight ExtraWhitespace ctermbg=lightgreen guibg=lightgreen
+match ExtraWhitespace /\s\+$/
+
+set tw=80
diff --git a/roles/xorg/tasks/main.yml b/roles/xorg/tasks/main.yml
new file mode 100644
index 0000000..412b5b5
--- /dev/null
+++ b/roles/xorg/tasks/main.yml
@@ -0,0 +1,84 @@
+---
+- name: Queries package manager for graphical instalation
+  package:
+    name:
+      - autorandr
+      - font-bh-ttf
+      - gsfonts
+      - light
+      - noto-fonts-emoji
+      - physlock
+      - sdl_ttf
+      - ttf-bitstream-vera
+      - ttf-dejavu
+      - ttf-liberation
+      - xorg-fonts-type1
+      - xorg-xinit
+      - xorg-server
+      - xss-lock
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  become: yes
+
+- name: Queries package manager for graphical instalation specific to abyme installation
+  package:
+    name:
+      - nvidia
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  when: laptop.gpu
+  become: yes
+
+- name: Queries package manager for graphical instalation specific to abyme installation
+  package:
+    name:
+      - numlockx
+  register: pkg_result
+  retries: 3
+  until: pkg_result is succeeded
+  when: laptop.numpad
+  become: yes
+
+- name: Copy user configuration files
+  template:
+    src: 'xinitrc.j2'
+    dest: '.xinitrc'
+
+- name: Copy touchpad configuration
+  template:
+    src: '30-touchpad.conf.j2'
+    dest: '/etc/X11/xorg.conf.d/30-touchpad.conf'
+  become: yes
+
+- name: Change backlight property # doing some shifty things
+  file:
+    path: '/sys/class/backlight/intel_backlight/brightness'
+    group: video
+    mode: '0664'
+  become: yes
+
+- name: Gives user the good group
+  user:
+    name: ynerant
+    groups: video
+    append: yes
+  become: yes
+
+- name: Create autorandr configuration folder
+  file:
+    path: '~/.config/autorandr'
+    state: directory
+
+- name: Install autorandr postswitch configuration file
+  template:
+    src: 'postswitch.j2'
+    dest: '~/.config/autorandr/postswitch'
+    mode: '0755'
+
+- name: Enable autorandr service
+  service:
+    name: autorandr
+    enabled: yes
+  become: true
diff --git a/roles/xorg/templates/30-touchpad.conf.j2 b/roles/xorg/templates/30-touchpad.conf.j2
new file mode 100644
index 0000000..20b67a3
--- /dev/null
+++ b/roles/xorg/templates/30-touchpad.conf.j2
@@ -0,0 +1,6 @@
+Section "InputClass"
+	Identifier "touchpad"
+	Driver "libinput"
+	MatchIsTouchpad "on"
+	Option "Tapping" "on"
+EndSection
diff --git a/roles/xorg/templates/postswitch.j2 b/roles/xorg/templates/postswitch.j2
new file mode 100644
index 0000000..c0fbbb3
--- /dev/null
+++ b/roles/xorg/templates/postswitch.j2
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+~/.fehbg
diff --git a/roles/xorg/templates/xinitrc.j2 b/roles/xorg/templates/xinitrc.j2
new file mode 100644
index 0000000..a532d42
--- /dev/null
+++ b/roles/xorg/templates/xinitrc.j2
@@ -0,0 +1,13 @@
+eval $(/usr/bin/gnome-keyring-daemon --start --components=gpg,pkcs11,secrets,ssh)
+export $(gnome-keyring-daemon --start --components=pkcs11,secrets,ssh,gpg)
+dbus-update-activation-environment --systemd DISPLAY
+
+
+setxkbmap fr oss
+xss-lock -- physlock -d &
+autorandr --change
+{% if laptop.gpu %}
+exec prime-run i3
+{% else %}
+exec i3
+{% endif %}